The MTE prctl test emits one result from check_basic_read() followed by
one result for each of the seven entries in mte_modes[]. However, the TAP
plan only accounts for the array entries, producing:

  # Planned tests != run tests (7 != 8)

Include the basic read check in the plan so that all eight emitted results
are declared.

Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: 1f488fb91378 ("kselftest/arm64/mte: Add MTE_STORE_ONLY testcases")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

The MTE KSM test requires write access to KSM sysfs but does not check
that it is running as root. It also unconditionally saves, enables and
restores the merge_across_nodes attribute. The kernel only creates this
attribute when CONFIG_NUMA=y, so a non-NUMA kernel prints the following
message three times even though every KSM subtest passes:

  # ERR: missing /sys/kernel/mm/ksm/merge_across_nodes

Skip the test when it is not running as root. Check that the optional
attribute is readable and writable, treating ENOENT as its expected
absence on non-NUMA kernels and skipping the test for other access
failures. Only save, enable and restore the attribute when it is
available.

Check MTE availability before the privilege and sysfs checks so systems
without MTE retain the existing feature-unavailable skip result.

This preserves the existing behavior on NUMA kernels without requiring
NUMA or reducing KSM coverage on single-node systems.

Fixes: f981d8fa2646 ("kselftest/arm64: Verify KSM page merge for MTE pages")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

Most MTE tests set a TAP plan and emit results without first printing
the TAP version header. Direct execution therefore starts with a plan
such as "1..20" instead of "TAP version 13".

The problem is particularly visible in the GCR_EL1 context-switch test.
It prints its plan before forking 1,024 child processes. When stdout is
fully buffered, the plan remains in the stdio buffer. Each child inherits
the pending "1..1" line and flushes its copy from exit(), producing
repeated plan lines.

ksft_print_header() prints the TAP header and enables line buffering.
Call it in every MTE test that is missing it. In the GCR_EL1 test, call
it before the plan so the plan is flushed before the children are
forked. In the remaining tests, call it before setup and prerequisite
checks so early failures and whole-test skips also retain the header.

Fixes: 29f080881601 ("kselftest/arm64: check GCR_EL1 after context switch")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

The binary generated by check_hugetlb_options is missing in .gitignore
under the directory. Add it into the file so it won't be logged into
version control.

Signed-off-by: I-Hsin Cheng <richard120310@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>

* for-next/feat_mte_store_only:
  : MTE feature to restrict tag checking to store only operations
  kselftest/arm64/mte: Add MTE_STORE_ONLY testcases
  kselftest/arm64/mte: Preparation for mte store only test
  kselftest/arm64/abi: Add MTE_STORE_ONLY feature hwcap test
  KVM: arm64: Expose MTE_STORE_ONLY feature to guest
  arm64/hwcaps: Add MTE_STORE_ONLY hwcaps
  arm64/kernel: Support store-only mte tag check
  prctl: Introduce PR_MTE_STORE_ONLY
  arm64/cpufeature: Add MTE_STORE_ONLY feature

* arm64/for-next/perf: (23 commits)
  drivers/perf: hisi: Support PMUs with no interrupt
  drivers/perf: hisi: Relax the event number check of v2 PMUs
  drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
  drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
  drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
  drivers/perf: hisi: Simplify the probe process for each DDRC version
  perf/arm-ni: Support sharing IRQs within an NI instance
  perf/arm-ni: Consolidate CPU affinity handling
  perf/cxlpmu: Fix typos in cxl_pmu.c comments and documentation
  perf/cxlpmu: Remove unintended newline from IRQ name format string
  perf/cxlpmu: Fix devm_kcalloc() argument order in cxl_pmu_probe()
  perf: arm_spe: Relax period restriction
  perf: arm_pmuv3: Add support for the Branch Record Buffer Extension (BRBE)
  KVM: arm64: nvhe: Disable branch generation in nVHE guests
  arm64: Handle BRBE booting requirements
  arm64/sysreg: Add BRBE registers and fields
  perf/arm: Add missing .suppress_bind_attrs
  perf/arm-cmn: Reduce stack usage during discovery
  perf: imx9_perf: make the read-only array mask static const
  perf/arm-cmn: Broaden module description for wider interconnect support
  ...

* for-next/livepatch:
  : Support for HAVE_LIVEPATCH on arm64
  arm64: Kconfig: Keep selects somewhat alphabetically ordered
  arm64: Implement HAVE_LIVEPATCH
  arm64: stacktrace: Implement arch_stack_walk_reliable()
  arm64: stacktrace: Check kretprobe_find_ret_addr() return value
  arm64/module: Use text-poke API for late relocations.

* for-next/user-contig-bbml2:
  : Optimise the TLBI when folding/unfolding contigous PTEs on hardware with BBML2 and no TLB conflict aborts
  arm64/mm: Elide tlbi in contpte_convert() under BBML2
  iommu/arm: Add BBM Level 2 smmu feature
  arm64: Add BBM Level 2 cpu feature
  arm64: cpufeature: Introduce MATCH_ALL_EARLY_CPUS capability type

* for-next/misc:
  : Miscellaneous arm64 patches
  arm64/gcs: task_gcs_el0_enable() should use passed task
  arm64: signal: Remove ISB when resetting POR_EL0
  arm64/mm: Drop redundant addr increment in set_huge_pte_at()
  arm64: Mark kernel as tainted on SAE and SError panic
  arm64/gcs: Don't call gcs_free() when releasing task_struct
  arm64: fix unnecessary rebuilding when CONFIG_DEBUG_EFI=y
  arm64/mm: Optimize loop to reduce redundant operations of contpte_ptep_get
  arm64: pi: use 'targets' instead of extra-y in Makefile

* for-next/acpi:
  : Various ACPI arm64 changes
  ACPI: Suppress misleading SPCR console message when SPCR table is absent
  ACPI: Return -ENODEV from acpi_parse_spcr() when SPCR support is disabled

* for-next/debug-entry:
  : Simplify the debug exception entry path
  arm64: debug: remove debug exception registration infrastructure
  arm64: debug: split bkpt32 exception entry
  arm64: debug: split brk64 exception entry
  arm64: debug: split hardware watchpoint exception entry
  arm64: debug: split single stepping exception entry
  arm64: debug: refactor reinstall_suspended_bps()
  arm64: debug: split hardware breakpoint exception entry
  arm64: entry: Add entry and exit functions for debug exceptions
  arm64: debug: remove break/step handler registration infrastructure
  arm64: debug: call step handlers statically
  arm64: debug: call software breakpoint handlers statically
  arm64: refactor aarch32_break_handler()
  arm64: debug: clean up single_step_handler logic

* for-next/feat_mte_tagged_far:
  : Support for reporting the non-address bits during a synchronous MTE tag check fault
  kselftest/arm64/mte: Add mtefar tests on check_mmap_options
  kselftest/arm64/mte: Refactor check_mmap_option test
  kselftest/arm64/mte: Add verification for address tag in signal handler
  kselftest/arm64/mte: Add address tag related macro and function
  kselftest/arm64/mte: Check MTE_FAR feature is supported
  kselftest/arm64/mte: Register mte signal handler with SA_EXPOSE_TAGBITS
  kselftest/arm64: Add MTE_FAR hwcap test
  KVM: arm64: Expose FEAT_MTE_TAGGED_FAR feature to guest
  arm64: Report address tag when FEAT_MTE_TAGGED_FAR is supported
  arm64/cpufeature: Add FEAT_MTE_TAGGED_FAR feature

* for-next/kselftest:
  : Kselftest updates for arm64
  kselftest/arm64: Handle attempts to disable SM on SME only systems
  kselftest/arm64: Fix SVE write data generation for SME only systems
  kselftest/arm64: Test SME on SME only systems in fp-ptrace
  kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
  kselftest/arm64: Allow sve-ptrace to run on SME only systems
  kselftest/arm4: Provide local defines for AT_HWCAP3
  kselftest/arm64: Specify SVE data when testing VL set in sve-ptrace
  kselftest/arm64: Fix test for streaming FPSIMD write in sve-ptrace
  kselftest/arm64: Fix check for setting new VLs in sve-ptrace
  kselftest/arm64: Convert tpidr2 test to use kselftest.h

* for-next/mdscr-cleanup:
  : Drop redundant DBG_MDSCR_* macros
  KVM: selftests: Change MDSCR_EL1 register holding variables as uint64_t
  arm64/debug: Drop redundant DBG_MDSCR_* macros

* for-next/vmap-stack:
  : Force VMAP_STACK on arm64
  arm64: remove CONFIG_VMAP_STACK checks from entry code
  arm64: remove CONFIG_VMAP_STACK checks from SDEI stack handling
  arm64: remove CONFIG_VMAP_STACK checks from stacktrace overflow logic
  arm64: remove CONFIG_VMAP_STACK conditionals from traps overflow stack
  arm64: remove CONFIG_VMAP_STACK conditionals from irq stack setup
  arm64: Remove CONFIG_VMAP_STACK conditionals from THREAD_SHIFT and THREAD_ALIGN
  arm64: efi: Remove CONFIG_VMAP_STACK check
  arm64: Mandate VMAP_STACK
  arm64: efi: Fix KASAN false positive for EFI runtime stack
  arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
  arm64/gcs: Don't call gcs_free() during flush_gcs()
  arm64: Restrict pagetable teardown to avoid false warning
  docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst

Some build environments for the selftests are not picking up the newly
added AT_HWCAP3 when using the libc headers, even with headers_install
(which we require already for the arm64 selftests).  As a quick fix add
local definitions of the constant to tools use it, while auxvec.h is
installed with some toolchains it needs some persuasion to get picked up.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250715-arm64-selftest-bodge-hwcap3-v1-1-541b54bc43bb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

Since ARMv8.9, FEAT_MTE_STORE_ONLY can be used to restrict raise of tag
check fault on store operation only.

Adds new test cases using MTE_STORE_ONLY feature.

Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618092957.2069907-9-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Since ARMv8.9, FEAT_MTE_STORE_ONLY can be used to restrict raise of tag
check fault on store operation only.

This patch is preparation for testing FEAT_MTE_STORE_ONLY
It shouldn't change test result.

Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618092957.2069907-8-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

If FEAT_MTE_TAGGED_FAR (Armv8.9) is supported, bits 63:60 of the fault address
are preserved in response to synchronous tag check faults (SEGV_MTESERR).

This patch adds new test cases using address tags (bits 63:60),
corresponding to each existing test in check_mmap_option.

Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618084513.1761345-11-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>