linux.git/tools/testing/selftests/arm64/fp, branch v6.9 Linux kernel source tree kselftest/arm64: Test that ptrace takes effect in the target process 2024-02-21T17:59:35+00:00 Mark Brown broonie@kernel.org 2024-01-22T21:05:03+00:00 c745b15c1f9cea5680c2906ae868302108f8daf0 While we have test coverage for the ptrace interface in our selftests the current programs have a number of gaps. The testing is done per regset so does not cover interactions and at no point do any of the tests actually run the traced processes meaning that there is no validation that anything we read or write corresponds to register values the process actually sees. Let's add a new program which attempts to cover these gaps. Each test we do performs a single ptrace write. For each test we generate some random initial register data in memory and then fork() and trace a child. The child will load the generated data into the registers then trigger a breakpoint. The parent waits for the breakpoint then reads the entire child register state via ptrace, verifying that the values expected were actually loaded by the child. It then does the write being tested and resumes the child. Once resumed the child saves the register state it sees to memory and executes another breakpoint. The parent uses process_vm_readv() to get these values from the child and verifies that the values were as expected before cleaning up the child. We generate configurations with combinations of vector lengths and SVCR values and then try every ptrace write which will implement the transition we generated. In order to control execution time (especially in emulation) we only cover the minimum and maximum VL for each of SVE and SME, this will ensure we generate both increasing and decreasing changes in vector length. In order to provide a baseline test we also check the case where we resume the child without doing a ptrace write. In order to simplify the generation of the test count for kselftest we will report but skip a substantial number of tests that can't actually be expressed via a single ptrace write, several times more than we actually run. This is noisy and will add some overhead but is very much simpler so is probably worth the tradeoff. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240122-arm64-test-ptrace-regs-v1-1-0897f822d73e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
While we have test coverage for the ptrace interface in our selftests
the current programs have a number of gaps. The testing is done per
regset so does not cover interactions and at no point do any of the
tests actually run the traced processes meaning that there is no
validation that anything we read or write corresponds to register values
the process actually sees. Let's add a new program which attempts to cover
these gaps.

Each test we do performs a single ptrace write. For each test we generate
some random initial register data in memory and then fork() and trace a
child. The child will load the generated data into the registers then
trigger a breakpoint. The parent waits for the breakpoint then reads the
entire child register state via ptrace, verifying that the values expected
were actually loaded by the child. It then does the write being tested
and resumes the child. Once resumed the child saves the register state
it sees to memory and executes another breakpoint. The parent uses
process_vm_readv() to get these values from the child and verifies that
the values were as expected before cleaning up the child.

We generate configurations with combinations of vector lengths and SVCR
values and then try every ptrace write which will implement the
transition we generated. In order to control execution time (especially
in emulation) we only cover the minimum and maximum VL for each of SVE
and SME, this will ensure we generate both increasing and decreasing
changes in vector length. In order to provide a baseline test we also
check the case where we resume the child without doing a ptrace write.

In order to simplify the generation of the test count for kselftest we
will report but skip a substantial number of tests that can't actually
be expressed via a single ptrace write, several times more than we
actually run. This is noisy and will add some overhead but is very much
simpler so is probably worth the tradeoff.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240122-arm64-test-ptrace-regs-v1-1-0897f822d73e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
kselftest/arm64: Don't probe the current VL for unsupported vector types 2023-12-19T10:03:17+00:00 Mark Brown broonie@kernel.org 2023-12-18T23:39:32+00:00 9a802ddb2123e5adec394d35cd539cc0b15bc830 The vec-syscfg selftest verifies that setting the VL of the currently tested vector type does not disrupt the VL of the other vector type. To do this it records the current vector length for each type but neglects to guard this with a check for that vector type actually being supported. Add one, using a helper function which we also update all the other instances of this pattern. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org Signed-off-by: Will Deacon <will@kernel.org> 
The vec-syscfg selftest verifies that setting the VL of the currently
tested vector type does not disrupt the VL of the other vector type. To do
this it records the current vector length for each type but neglects to
guard this with a check for that vector type actually being supported. Add
one, using a helper function which we also update all the other instances
of this pattern.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
kselftest/arm64: Log SVCR when the SME tests barf 2023-12-11T12:02:00+00:00 Mark Brown broonie@kernel.org 2023-12-05T14:24:44+00:00 48f7ab21f731f5a02ec34a4b83ae88c4a41d6a10 On failure we log the actual and expected value of the register we detect a mismatch in. For SME one obvious potential source of corruption would be if we had corrupted SVCR since changes in streaming mode will reset the register values, log the value to aid in understanding issues. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231205-arm64-kselftest-log-svcr-v1-1-b77abd9ee7f3@kernel.org Signed-off-by: Will Deacon <will@kernel.org> 
On failure we log the actual and expected value of the register we detect
a mismatch in. For SME one obvious potential source of corruption would be
if we had corrupted SVCR since changes in streaming mode will reset the
register values, log the value to aid in understanding issues.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231205-arm64-kselftest-log-svcr-v1-1-b77abd9ee7f3@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
kselftest/arm64: Fix output formatting for za-fork 2023-11-23T14:16:15+00:00 Mark Brown broonie@kernel.org 2023-11-16T12:52:29+00:00 460e462d22542adfafd8a5bc979437df73f1cbf3 The za-fork test does not output a newline when reporting the result of the one test it runs, causing the counts printed by kselftest to be included in the test name. Add the newline. Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h") Cc: <stable@vger.kernel.org> # 6.4.x Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
The za-fork test does not output a newline when reporting the result of
the one test it runs, causing the counts printed by kselftest to be
included in the test name.  Add the newline.

Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h")
Cc: <stable@vger.kernel.org> # 6.4.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
kselftest/arm64: Validate SVCR in streaming SVE stress test 2023-09-25T16:20:38+00:00 Mark Brown broonie@kernel.org 2023-09-22T13:42:55+00:00 11a7a42ea76e61a8d2f7374ecdd95460dec4413f In the ZA and ZT test programs we explicitly validate that PSTATE.ZA is as expected on each loop but we do not do the equivalent for our streaming SVE test, add a check that we are still in streaming mode on every loop in case that goes wrong. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230922-arm64-ssve-validate-svcr-v1-1-f518960eaeda@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
In the ZA and ZT test programs we explicitly validate that PSTATE.ZA is as
expected on each loop but we do not do the equivalent for our streaming
SVE test, add a check that we are still in streaming mode on every loop
in case that goes wrong.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230922-arm64-ssve-validate-svcr-v1-1-f518960eaeda@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
kselftest/arm64: Validate that changing one VL type does not affect another 2023-07-27T15:52:06+00:00 Mark Brown broonie@kernel.org 2023-07-20T18:39:00+00:00 0aeead9bb240a6965ede2bed68096c4381fd46a3 On a system with both SVE and SME when we change one of the VLs this should not result in a change in the other VL. Add a check that this is in fact the case to vec-syscfg. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-3-8eea06b82d57@kernel.org Signed-off-by: Will Deacon <will@kernel.org> 
On a system with both SVE and SME when we change one of the VLs this should
not result in a change in the other VL. Add a check that this is in fact
the case to vec-syscfg.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-3-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
kselftest/arm64: Add a test case for SVE VL changes with SME active 2023-07-27T15:52:05+00:00 Mark Brown broonie@kernel.org 2023-07-20T18:38:59+00:00 0c7c237b1c35011ef0b8d30c1d5c20bc6ae7b69b We just fixed an issue where changing the SVE VL while SME was active could result in us attempting to save the streaming mode SVE vectors without any backing storage. Add a test case which provokes that issue, ideally we should also verify that the contents of ZA are unaffected by any of what we did. Note that since we need to keep streaming mode enabled we can't use any syscalls to trigger the issue, we have to sit in a loop in usersapce and hope to be preempted. The chosen numbers trigger with defconfig on all the virtual platforms for me, this won't be 100% on all systems but avoid an overcomplicated test implementation. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-2-8eea06b82d57@kernel.org Signed-off-by: Will Deacon <will@kernel.org> 
We just fixed an issue where changing the SVE VL while SME was active could
result in us attempting to save the streaming mode SVE vectors without any
backing storage. Add a test case which provokes that issue, ideally we
should also verify that the contents of ZA are unaffected by any of what we
did.

Note that since we need to keep streaming mode enabled we can't use any
syscalls to trigger the issue, we have to sit in a loop in usersapce and
hope to be preempted. The chosen numbers trigger with defconfig on all the
virtual platforms for me, this won't be 100% on all systems but avoid an
overcomplicated test implementation.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-2-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
kselftest/arm64: Convert za-fork to use kselftest.h 2023-04-11T20:10:51+00:00 Mark Brown broonie@kernel.org 2023-04-06T16:19:12+00:00 266679ffd867cb247c36717ea4d7998e9304823b Now that kselftest.h can be used with nolibc convert the za-fork test to use it. We do still have to open code ksft_print_msg() but that's not the end of the world. Some of the advantage comes from using printf() which we could have been using already. This does change the output when tests are skipped, bringing it in line with the standard kselftest output by removing the test name - we move from ok 0 skipped to ok 1 # SKIP fork_test The old output was not following KTAP format for skips, and the numbering was not standard or consistent with the reported plan. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> 
Now that kselftest.h can be used with nolibc convert the za-fork test to
use it. We do still have to open code ksft_print_msg() but that's not the
end of the world. Some of the advantage comes from using printf() which we
could have been using already.

This does change the output when tests are skipped, bringing it in line
with the standard kselftest output by removing the test name - we move
from

    ok 0 skipped

to

    ok 1 # SKIP fork_test

The old output was not following KTAP format for skips, and the
numbering was not standard or consistent with the reported plan.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest 2023-02-23T17:37:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-23T17:37:29+00:00 d6296cb65320be16dbf20f2fd584ddc25f3437cd Pull Kselftest update from Shuah Khan: - several patches to fix incorrect kernel headers search path from Mathieu Desnoyers - a few follow-on fixes found during testing the above change - miscellaneous fixes - support for filtering and enumerating tests * tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits) selftests/user_events: add a note about user_events.h dependency selftests/mount_setattr: fix to make run_tests failure selftests/mount_setattr: fix redefine struct mount_attr build error selftests/sched: fix warn_unused_result build warns selftests/ptp: Remove clean target from Makefile selftests: use printf instead of echo -ne selftests/ftrace: Fix bash specific "==" operator selftests: tpm2: remove redundant ord() selftests: find echo binary to use -ne options selftests: Fix spelling mistake "allright" -> "all right" selftests: tdx: Use installed kernel headers search path selftests: ptrace: Use installed kernel headers search path selftests: memfd: Use installed kernel headers search path selftests: iommu: Use installed kernel headers search path selftests: x86: Fix incorrect kernel headers search path selftests: vm: Fix incorrect kernel headers search path selftests: user_events: Fix incorrect kernel headers search path selftests: sync: Fix incorrect kernel headers search path selftests: seccomp: Fix incorrect kernel headers search path selftests: sched: Fix incorrect kernel headers search path ... 
Pull Kselftest update from Shuah Khan:

 - several patches to fix incorrect kernel headers search path from
   Mathieu Desnoyers

 - a few follow-on fixes found during testing the above change

 - miscellaneous fixes

 - support for filtering and enumerating tests

* tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits)
  selftests/user_events: add a note about user_events.h dependency
  selftests/mount_setattr: fix to make run_tests failure
  selftests/mount_setattr: fix redefine struct mount_attr build error
  selftests/sched: fix warn_unused_result build warns
  selftests/ptp: Remove clean target from Makefile
  selftests: use printf instead of echo -ne
  selftests/ftrace: Fix bash specific "==" operator
  selftests: tpm2: remove redundant ord()
  selftests: find echo binary to use -ne options
  selftests: Fix spelling mistake "allright" -> "all right"
  selftests: tdx: Use installed kernel headers search path
  selftests: ptrace: Use installed kernel headers search path
  selftests: memfd: Use installed kernel headers search path
  selftests: iommu: Use installed kernel headers search path
  selftests: x86: Fix incorrect kernel headers search path
  selftests: vm: Fix incorrect kernel headers search path
  selftests: user_events: Fix incorrect kernel headers search path
  selftests: sync: Fix incorrect kernel headers search path
  selftests: seccomp: Fix incorrect kernel headers search path
  selftests: sched: Fix incorrect kernel headers search path
  ...
Merge branches 'for-next/sysreg', 'for-next/sme', 'for-next/kselftest', 'for-next/misc', 'for-next/sme2', 'for-next/tpidr2', 'for-next/scs', 'for-next/compat-hwcap', 'for-next/ftrace', 'for-next/efi-boot-mmu-on', 'for-next/ptrauth' and 'for-next/pseudo-nmi', remote-tracking branch 'arm64/for-next/perf' into for-next/core 2023-02-10T18:51:49+00:00 Catalin Marinas catalin.marinas@arm.com 2023-02-10T18:51:49+00:00 156010ed9c2ac1e9df6c11b1f688cf8a6e0152e6 * arm64/for-next/perf: perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event perf: arm_spe: Use new PMSIDR_EL1 register enums perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors arm64/sysreg: Convert SPE registers to automatic generation arm64: Drop SYS_ from SPE register defines perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines perf/marvell: Add ACPI support to TAD uncore driver perf/marvell: Add ACPI support to DDR uncore driver perf/arm-cmn: Reset DTM_PMU_CONFIG at probe drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu" drivers/perf: hisi: Simplify the parameters of hisi_pmu_init() drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability * for-next/sysreg: : arm64 sysreg and cpufeature fixes/updates KVM: arm64: Use symbolic definition for ISR_EL1.A arm64/sysreg: Add definition of ISR_EL1 arm64/sysreg: Add definition for ICC_NMIAR1_EL1 arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK() arm64/sysreg: Fix errors in 32 bit enumeration values arm64/cpufeature: Fix field sign for DIT hwcap detection * for-next/sme: : SME-related updates arm64/sme: Optimise SME exit on syscall entry arm64/sme: Don't use streaming mode to probe the maximum SME VL arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support * for-next/kselftest: (23 commits) : arm64 kselftest fixes and improvements kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA kselftest/arm64: Fix enumeration of systems without 128 bit SME kselftest/arm64: Don't require FA64 for streaming SVE tests kselftest/arm64: Limit the maximum VL we try to set via ptrace kselftest/arm64: Correct buffer size for SME ZA storage kselftest/arm64: Remove the local NUM_VL definition kselftest/arm64: Verify simultaneous SSVE and ZA context generation kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set kselftest/arm64: Remove spurious comment from MTE test Makefile kselftest/arm64: Support build of MTE tests with clang kselftest/arm64: Initialise current at build time in signal tests kselftest/arm64: Don't pass headers to the compiler as source kselftest/arm64: Remove redundant _start labels from FP tests kselftest/arm64: Fix .pushsection for strings in FP tests kselftest/arm64: Run BTI selftests on systems without BTI kselftest/arm64: Fix test numbering when skipping tests kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress kselftest/arm64: Only enumerate power of two VLs in syscall-abi ... * for-next/misc: : Miscellaneous arm64 updates arm64/mm: Intercept pfn changes in set_pte_at() Documentation: arm64: correct spelling arm64: traps: attempt to dump all instructions arm64: Apply dynamic shadow call stack patching in two passes arm64: el2_setup.h: fix spelling typo in comments arm64: Kconfig: fix spelling arm64: cpufeature: Use kstrtobool() instead of strtobool() arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path arm64: make ARCH_FORCE_MAX_ORDER selectable * for-next/sme2: (23 commits) : Support for arm64 SME 2 and 2.1 arm64/sme: Fix __finalise_el2 SMEver check kselftest/arm64: Remove redundant _start labels from zt-test kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps kselftest/arm64: Add coverage of the ZT ptrace regset kselftest/arm64: Add SME2 coverage to syscall-abi kselftest/arm64: Add test coverage for ZT register signal frames kselftest/arm64: Teach the generic signal context validation about ZT kselftest/arm64: Enumerate SME2 in the signal test utility code kselftest/arm64: Cover ZT in the FP stress test kselftest/arm64: Add a stress test program for ZT0 arm64/sme: Add hwcaps for SME 2 and 2.1 features arm64/sme: Implement ZT0 ptrace support arm64/sme: Implement signal handling for ZT arm64/sme: Implement context switching for ZT0 arm64/sme: Provide storage for ZT0 arm64/sme: Add basic enumeration for SME2 arm64/sme: Enable host kernel to access ZT0 arm64/sme: Manually encode ZT0 load and store instructions arm64/esr: Document ISS for ZT0 being disabled arm64/sme: Document SME 2 and SME 2.1 ABI ... * for-next/tpidr2: : Include TPIDR2 in the signal context kselftest/arm64: Add test case for TPIDR2 signal frame records kselftest/arm64: Add TPIDR2 to the set of known signal context records arm64/signal: Include TPIDR2 in the signal context arm64/sme: Document ABI for TPIDR2 signal information * for-next/scs: : arm64: harden shadow call stack pointer handling arm64: Stash shadow stack pointer in the task struct on interrupt arm64: Always load shadow stack pointer directly from the task struct * for-next/compat-hwcap: : arm64: Expose compat ARMv8 AArch32 features (HWCAPs) arm64: Add compat hwcap SSBS arm64: Add compat hwcap SB arm64: Add compat hwcap I8MM arm64: Add compat hwcap ASIMDBF16 arm64: Add compat hwcap ASIMDFHM arm64: Add compat hwcap ASIMDDP arm64: Add compat hwcap FPHP and ASIMDHP * for-next/ftrace: : Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS arm64: avoid executing padding bytes during kexec / hibernation arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS arm64: ftrace: Update stale comment arm64: patching: Add aarch64_insn_write_literal_u64() arm64: insn: Add helpers for BTI arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT ACPI: Don't build ACPICA with '-Os' Compiler attributes: GCC cold function alignment workarounds ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS * for-next/efi-boot-mmu-on: : Permit arm64 EFI boot with MMU and caches on arm64: kprobes: Drop ID map text from kprobes blacklist arm64: head: Switch endianness before populating the ID map efi: arm64: enter with MMU and caches enabled arm64: head: Clean the ID map and the HYP text to the PoC if needed arm64: head: avoid cache invalidation when entering with the MMU on arm64: head: record the MMU state at primary entry arm64: kernel: move identity map out of .text mapping arm64: head: Move all finalise_el2 calls to after __enable_mmu * for-next/ptrauth: : arm64 pointer authentication cleanup arm64: pauth: don't sign leaf functions arm64: unify asm-arch manipulation * for-next/pseudo-nmi: : Pseudo-NMI code generation optimisations arm64: irqflags: use alternative branches for pseudo-NMI logic arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS 
* arm64/for-next/perf:
  perf: arm_spe: Print the version of SPE detected
  perf: arm_spe: Add support for SPEv1.2 inverted event filtering
  perf: Add perf_event_attr::config3
  drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
  perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event
  perf: arm_spe: Use new PMSIDR_EL1 register enums
  perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors
  arm64/sysreg: Convert SPE registers to automatic generation
  arm64: Drop SYS_ from SPE register defines
  perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines
  perf/marvell: Add ACPI support to TAD uncore driver
  perf/marvell: Add ACPI support to DDR uncore driver
  perf/arm-cmn: Reset DTM_PMU_CONFIG at probe
  drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu"
  drivers/perf: hisi: Simplify the parameters of hisi_pmu_init()
  drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability

* for-next/sysreg:
  : arm64 sysreg and cpufeature fixes/updates
  KVM: arm64: Use symbolic definition for ISR_EL1.A
  arm64/sysreg: Add definition of ISR_EL1
  arm64/sysreg: Add definition for ICC_NMIAR1_EL1
  arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK()
  arm64/sysreg: Fix errors in 32 bit enumeration values
  arm64/cpufeature: Fix field sign for DIT hwcap detection

* for-next/sme:
  : SME-related updates
  arm64/sme: Optimise SME exit on syscall entry
  arm64/sme: Don't use streaming mode to probe the maximum SME VL
  arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support

* for-next/kselftest: (23 commits)
  : arm64 kselftest fixes and improvements
  kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
  kselftest/arm64: Copy whole EXTRA context
  kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA
  kselftest/arm64: Fix enumeration of systems without 128 bit SME
  kselftest/arm64: Don't require FA64 for streaming SVE tests
  kselftest/arm64: Limit the maximum VL we try to set via ptrace
  kselftest/arm64: Correct buffer size for SME ZA storage
  kselftest/arm64: Remove the local NUM_VL definition
  kselftest/arm64: Verify simultaneous SSVE and ZA context generation
  kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set
  kselftest/arm64: Remove spurious comment from MTE test Makefile
  kselftest/arm64: Support build of MTE tests with clang
  kselftest/arm64: Initialise current at build time in signal tests
  kselftest/arm64: Don't pass headers to the compiler as source
  kselftest/arm64: Remove redundant _start labels from FP tests
  kselftest/arm64: Fix .pushsection for strings in FP tests
  kselftest/arm64: Run BTI selftests on systems without BTI
  kselftest/arm64: Fix test numbering when skipping tests
  kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress
  kselftest/arm64: Only enumerate power of two VLs in syscall-abi
  ...

* for-next/misc:
  : Miscellaneous arm64 updates
  arm64/mm: Intercept pfn changes in set_pte_at()
  Documentation: arm64: correct spelling
  arm64: traps: attempt to dump all instructions
  arm64: Apply dynamic shadow call stack patching in two passes
  arm64: el2_setup.h: fix spelling typo in comments
  arm64: Kconfig: fix spelling
  arm64: cpufeature: Use kstrtobool() instead of strtobool()
  arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path
  arm64: make ARCH_FORCE_MAX_ORDER selectable

* for-next/sme2: (23 commits)
  : Support for arm64 SME 2 and 2.1
  arm64/sme: Fix __finalise_el2 SMEver check
  kselftest/arm64: Remove redundant _start labels from zt-test
  kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps
  kselftest/arm64: Add coverage of the ZT ptrace regset
  kselftest/arm64: Add SME2 coverage to syscall-abi
  kselftest/arm64: Add test coverage for ZT register signal frames
  kselftest/arm64: Teach the generic signal context validation about ZT
  kselftest/arm64: Enumerate SME2 in the signal test utility code
  kselftest/arm64: Cover ZT in the FP stress test
  kselftest/arm64: Add a stress test program for ZT0
  arm64/sme: Add hwcaps for SME 2 and 2.1 features
  arm64/sme: Implement ZT0 ptrace support
  arm64/sme: Implement signal handling for ZT
  arm64/sme: Implement context switching for ZT0
  arm64/sme: Provide storage for ZT0
  arm64/sme: Add basic enumeration for SME2
  arm64/sme: Enable host kernel to access ZT0
  arm64/sme: Manually encode ZT0 load and store instructions
  arm64/esr: Document ISS for ZT0 being disabled
  arm64/sme: Document SME 2 and SME 2.1 ABI
  ...

* for-next/tpidr2:
  : Include TPIDR2 in the signal context
  kselftest/arm64: Add test case for TPIDR2 signal frame records
  kselftest/arm64: Add TPIDR2 to the set of known signal context records
  arm64/signal: Include TPIDR2 in the signal context
  arm64/sme: Document ABI for TPIDR2 signal information

* for-next/scs:
  : arm64: harden shadow call stack pointer handling
  arm64: Stash shadow stack pointer in the task struct on interrupt
  arm64: Always load shadow stack pointer directly from the task struct

* for-next/compat-hwcap:
  : arm64: Expose compat ARMv8 AArch32 features (HWCAPs)
  arm64: Add compat hwcap SSBS
  arm64: Add compat hwcap SB
  arm64: Add compat hwcap I8MM
  arm64: Add compat hwcap ASIMDBF16
  arm64: Add compat hwcap ASIMDFHM
  arm64: Add compat hwcap ASIMDDP
  arm64: Add compat hwcap FPHP and ASIMDHP

* for-next/ftrace:
  : Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS
  arm64: avoid executing padding bytes during kexec / hibernation
  arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
  arm64: ftrace: Update stale comment
  arm64: patching: Add aarch64_insn_write_literal_u64()
  arm64: insn: Add helpers for BTI
  arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT
  ACPI: Don't build ACPICA with '-Os'
  Compiler attributes: GCC cold function alignment workarounds
  ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS

* for-next/efi-boot-mmu-on:
  : Permit arm64 EFI boot with MMU and caches on
  arm64: kprobes: Drop ID map text from kprobes blacklist
  arm64: head: Switch endianness before populating the ID map
  efi: arm64: enter with MMU and caches enabled
  arm64: head: Clean the ID map and the HYP text to the PoC if needed
  arm64: head: avoid cache invalidation when entering with the MMU on
  arm64: head: record the MMU state at primary entry
  arm64: kernel: move identity map out of .text mapping
  arm64: head: Move all finalise_el2 calls to after __enable_mmu

* for-next/ptrauth:
  : arm64 pointer authentication cleanup
  arm64: pauth: don't sign leaf functions
  arm64: unify asm-arch manipulation

* for-next/pseudo-nmi:
  : Pseudo-NMI code generation optimisations
  arm64: irqflags: use alternative branches for pseudo-NMI logic
  arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap
  arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS
  arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING
  arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS