When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.
[yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
BUILD: Doing 'make -j4' parallel build
HOSTCC fixdep.o
HOSTLD fixdep-in.o
LINK fixdep
<stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
<stdin>:1:0: warning: -fsanitize=address not supported for this target
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:224: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
[yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
/usr/include/gnu/libc-version.h
After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.
Committer testing:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:401: *** No libasan found, please install libasan. Stop.
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
$
$ sudo dnf install libasan
<SNIP>
Installed:
libasan-9.3.1-2.fc31.x86_64
$
$
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
<SNIP>
CC /tmp/build/perf/util/pmu-flex.o
FLEX /tmp/build/perf/util/expr-flex.c
CC /tmp/build/perf/util/expr-bison.o
CC /tmp/build/perf/util/expr.o
CC /tmp/build/perf/util/expr-flex.o
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/parse-events.o
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
INSTALL python-scripts
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
$
And if we rebuild without -fsanitize-address:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
CC /tmp/build/perf/exec-cmd.o
<SNIP>
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
$
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes segmentation fault when trying to interpret zstd-compressed data with perf script: ``` $ perf record -z ls ... [ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ] $ memcheck perf script ... ==67911== Invalid read of size 4 ==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5) ==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100) ==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72) ==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583) ==67911== by 0x65BA59: reader__process_events (session.c:2177) ==67911== by 0x65BA59: __perf_session__process_events (session.c:2234) ==67911== by 0x65BA59: perf_session__process_events (session.c:2267) ==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447) ==67911== by 0x5A7397: cmd_script (builtin-script.c:3840) ==67911== by 0x5FE9D2: run_builtin (perf.c:312) ==67911== by 0x711627: handle_internal_command (perf.c:364) ==67911== by 0x711627: run_argv (perf.c:408) ==67911== by 0x711627: main (perf.c:538) ==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd ``` Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This avoids multiple declarations if the flex header is included. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200609234344.3795-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: a26e47162d76 (perf tools: Move ALLOC_LIST into a function) Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200609053610.206588-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arrays are pointer types and don't need their address taking. Fixes: 8255718f4bed (perf pmu: Expand PMU events by prefix match) Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200609053610.206588-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Issue:
bpf_probe_read() is no longer available for architecture which has
overlapping address space. Hence bpf prologue generation fails
Fix:
Use bpf_probe_read_kernel for kernel member access. For user attribute
access in kprobes, use bpf_probe_read_user.
Other:
@user attribute was introduced in commit 1e032f7cfa14 ("perf-probe: Add
user memory access attribute support")
Test:
1. ulimit -l 128 ; ./perf record -e tests/bpf_sched_setscheduler.c
2. cat tests/bpf_sched_setscheduler.c
static void (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) =
(void *) 6;
static int (*bpf_probe_read_user)(void *dst, __u32 size,
const void *unsafe_ptr) = (void *) 112;
static int (*bpf_probe_read_kernel)(void *dst, __u32 size,
const void *unsafe_ptr) = (void *) 113;
SEC("func=do_sched_setscheduler pid policy param->sched_priority@user")
int bpf_func__setscheduler(void *ctx, int err, pid_t pid, int policy,
int param)
{
char fmt[] = "prio: %ld";
bpf_trace_printk(fmt, sizeof(fmt), param);
return 1;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
3. ./perf script
sched 305669 [000] 1614458.838675: perf_bpf_probe:func: (2904e508)
pid=261614 policy=2 sched_priority=1
4. cat /sys/kernel/debug/tracing/trace
<...>-309956 [006] .... 1616098.093957: 0: prio: 1
Committer testing:
I had to add some missing headers in the bpf_sched_setscheduler.c test
proggie, then instead of using record+script I used 'perf trace' to
drive everything in one go:
# cat bpf_sched_setscheduler.c
#include <linux/types.h>
#include <bpf.h>
static void (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) = (void *) 6;
static int (*bpf_probe_read_user)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 112;
static int (*bpf_probe_read_kernel)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 113;
SEC("func=do_sched_setscheduler pid policy param->sched_priority@user")
int bpf_func__setscheduler(void *ctx, int err, pid_t pid, int policy, int param)
{
char fmt[] = "prio: %ld";
bpf_trace_printk(fmt, sizeof(fmt), param);
return 1;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
#
# perf trace -e bpf_sched_setscheduler.c chrt -f 42 sleep 1
0.000 chrt/80125 perf_bpf_probe:func(__probe_ip: -1676607808, policy: 1, sched_priority: 42)
#
And even with backtraces :-)
# perf trace -e bpf_sched_setscheduler.c/max-stack=8/ chrt -f 42 sleep 1
0.000 chrt/79805 perf_bpf_probe:func(__probe_ip: -1676607808, policy: 1, sched_priority: 42)
do_sched_setscheduler ([kernel.kallsyms])
__x64_sys_sched_setscheduler ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
__GI___sched_setscheduler (/usr/lib64/libc-2.30.so)
#
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: bpf@vger.kernel.org
LPU-Reference: 20200609081019.60234-3-sumanthk@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Issue:
# perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'
did not work before.
Fix:
Make:
# perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'
output equivalent to ftrace:
# echo 'p:probe/do_sched_setscheduler _text+517384 pid=%r2:s32 policy=%r3:s32 sched_priority=+u0(%r4):s32' > /sys/kernel/debug/tracing/kprobe_events
Other:
1. Right now, __match_glob() does not handle [u]<offset>. For now, use
*u]<offset>.
2. @user attribute was introduced in commit 1e032f7cfa14 ("perf-probe:
Add user memory access attribute support")
Test:
1. perf probe -a 'do_sched_setscheduler pid policy
param->sched_priority@user'
2 ./perf script
sched 305669 [000] 1614458.838675: perf_bpf_probe:func: (2904e508)
pid=261614 policy=2 sched_priority=1
3. cat /sys/kernel/debug/tracing/trace
<...>-309956 [006] .... 1616098.093957: 0: prio: 1
Committer testing:
Before:
# perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'
param(type:sched_param) has no member sched_priority@user.
Error: Failed to add events.
# pahole sched_param
struct sched_param {
int sched_priority; /* 0 4 */
/* size: 4, cachelines: 1, members: 1 */
/* last cacheline: 4 bytes */
};
#
After:
# perf probe -a 'do_sched_setscheduler pid policy param->sched_priority@user'
Added new event:
probe:do_sched_setscheduler (on do_sched_setscheduler with pid policy sched_priority=param->sched_priority)
You can now use it in all perf tools, such as:
perf record -e probe:do_sched_setscheduler -aR sleep 1
# cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sched_setscheduler _text+1113792 pid=%di:s32 policy=%si:s32 sched_priority=+u0(%dx):s32
#
Fixes: 1e032f7cfa14 ("perf-probe: Add user memory access attribute support")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: bpf@vger.kernel.org
LPU-Reference: 20200609081019.60234-2-sumanthk@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If config->aggr_map is NULL and config->aggr_get_id is not NULL,
the function print_aggr() will still calling arrg_update_shadow(),
which can result in accessing the invalid pointer.
Fixes: 088519f318be ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/lkml/20200608163625.GC3073@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'evname' variable can be NULL, as it is checked a few lines back,
check it before using.
Fixes: 9e207ddfa207 ("perf report: Show call graph from reference events")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Introduced in:
fa2fcf4f1df1 ("statx: add mount ID")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>