linux.git/tools/perf/arch, branch v4.7-rc2 Linux kernel source tree Merge tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2016-05-20T17:12:41+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-20T17:12:41+00:00 c04a5880299eab3da8c10547db96ea9cdffd44a6 Pull powerpc updates from Michael Ellerman: "Highlights: - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V - Live patching support for ppc64le (also merged via livepatching.git) Various cleanups & minor fixes from: - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie, Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras, Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung Bauermann, Valentin Rothberg, Vipin K Parashar. General: - Update LMB associativity index during DLPAR add/remove from Nathan Fontenot - Fix branching to OOL handlers in relocatable kernel from Hari Bathini - Add support for userspace Power9 copy/paste from Chris Smart - Always use STRICT_MM_TYPECHECKS from Michael Ellerman - Add mask of possible MMU features from Michael Ellerman PCI: - Enable pass through of NVLink to guests from Alexey Kardashevskiy - Cleanups in preparation for powernv PCI hotplug from Gavin Shan - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" from Guilherme G Piccoli - Remove the dependency on EEH struct in DDW mechanism from Guilherme G Piccoli selftests: - Test cp_abort during context switch from Chris Smart - Add several tests for transactional memory support from Rashmica Gupta perf: - Add support for sampling interrupt register state from Anju T - Add support for unwinding perf-stackdump from Chandan Kumar cxl: - Configure the PSL for two CAPI ports on POWER8NVL from Philippe Bergheaud - Allow initialization on timebase sync failures from Frederic Barrat - Increase timeout for detection of AFU mmio hang from Frederic Barrat - Handle num_of_processes larger than can fit in the SPA from Ian Munsie - Ensure PSL interrupt is configured for contexts with no AFU IRQs from Ian Munsie - Add kernel API to allow a context to operate with relocate disabled from Ian Munsie - Check periodically the coherent platform function's state from Christophe Lombard Freescale: - Updates from Scott: "Contains 86xx fixes, minor device tree fixes, an erratum workaround, and a kconfig dependency fix." * tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits) powerpc/86xx: Fix PCI interrupt map definition powerpc/86xx: Move pci1 definition to the include file powerpc/fsl: Fix build of the dtb embedded kernel images powerpc/fsl: Fix rcpm compatible string powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC powerpc/fsl-pci: Add a workaround for PCI 5 errata powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb powerpc/powernv/npu: Add PE to PHB's list powerpc/powernv: Fix insufficient memory allocation powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner() powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover() powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover() powerpc/eeh: Don't report error in eeh_pe_reset_and_recover() Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()" powerpc/powernv/npu: Enable NVLink pass through powerpc/powernv/npu: Rework TCE Kill handling powerpc/powernv/npu: Add set/unset window helpers powerpc/powernv/ioda2: Export debug helper pe_level_printk() ... 
Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V
   - Live patching support for ppc64le (also merged via livepatching.git)

  Various cleanups & minor fixes from:
   - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
     Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie,
     Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring,
     Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras,
     Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung
     Bauermann, Valentin Rothberg, Vipin K Parashar.

  General:
   - Update LMB associativity index during DLPAR add/remove from Nathan
     Fontenot
   - Fix branching to OOL handlers in relocatable kernel from Hari Bathini
   - Add support for userspace Power9 copy/paste from Chris Smart
   - Always use STRICT_MM_TYPECHECKS from Michael Ellerman
   - Add mask of possible MMU features from Michael Ellerman

  PCI:
   - Enable pass through of NVLink to guests from Alexey Kardashevskiy
   - Cleanups in preparation for powernv PCI hotplug from Gavin Shan
   - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan
   - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan
   - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
     from Guilherme G Piccoli
   - Remove the dependency on EEH struct in DDW mechanism from Guilherme
     G Piccoli

  selftests:
   - Test cp_abort during context switch from Chris Smart
   - Add several tests for transactional memory support from Rashmica
     Gupta

  perf:
   - Add support for sampling interrupt register state from Anju T
   - Add support for unwinding perf-stackdump from Chandan Kumar

  cxl:
   - Configure the PSL for two CAPI ports on POWER8NVL from Philippe
     Bergheaud
   - Allow initialization on timebase sync failures from Frederic Barrat
   - Increase timeout for detection of AFU mmio hang from Frederic
     Barrat
   - Handle num_of_processes larger than can fit in the SPA from Ian
     Munsie
   - Ensure PSL interrupt is configured for contexts with no AFU IRQs
     from Ian Munsie
   - Add kernel API to allow a context to operate with relocate disabled
     from Ian Munsie
   - Check periodically the coherent platform function's state from
     Christophe Lombard

  Freescale:
   - Updates from Scott: "Contains 86xx fixes, minor device tree fixes,
     an erratum workaround, and a kconfig dependency fix."

* tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits)
  powerpc/86xx: Fix PCI interrupt map definition
  powerpc/86xx: Move pci1 definition to the include file
  powerpc/fsl: Fix build of the dtb embedded kernel images
  powerpc/fsl: Fix rcpm compatible string
  powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC
  powerpc/fsl-pci: Add a workaround for PCI 5 errata
  powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb
  powerpc/powernv/npu: Add PE to PHB's list
  powerpc/powernv: Fix insufficient memory allocation
  powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism
  Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
  powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner()
  powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover()
  powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover()
  powerpc/eeh: Don't report error in eeh_pe_reset_and_recover()
  Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()"
  powerpc/powernv/npu: Enable NVLink pass through
  powerpc/powernv/npu: Rework TCE Kill handling
  powerpc/powernv/npu: Add set/unset window helpers
  powerpc/powernv/ioda2: Export debug helper pe_level_printk()
  ...
perf/powerpc: Add support for unwinding perf-stackdump 2016-05-11T11:54:06+00:00 Chandan Kumar chandan.kumar@linux.vnet.ibm.com 2016-04-28T09:31:09+00:00 c4522469e6418fb547fbcd9d3aeb73bea0f6f859 Adds support for unwinding user stack dump by linking with libunwind. Signed-off-by: Chandan Kumar <chandan.kumar@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Adds support for unwinding user stack dump by linking with libunwind.

Signed-off-by: Chandan Kumar <chandan.kumar@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
perf symbols: Fix kallsyms perf test on ppc64le 2016-05-06T00:04:03+00:00 Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com 2016-04-12T09:10:50+00:00 0b3c2264ae30ed692fd1ffd2b84c5fbdf737cb0d ppc64le functions have a Global Entry Point (GEP) and a Local Entry Point (LEP). While placing a probe, we always prefer the LEP since it catches function calls through both the GEP and the LEP. In order to do this, we fixup the function entry points during elf symbol table lookup to point to the LEPs. This works, but breaks 'perf test kallsyms' since the symbols loaded from the symbol table (pointing to the LEP) do not match the symbols in kallsyms. To fix this, we do not adjust all the symbols during symbol table load. Instead, we note down st_other in a newly introduced arch-specific member of perf symbol structure, and later use this to adjust the probe trace point. Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Mark Wielaard <mjw@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/6be7c2b17e370100c2f79dd444509df7929bdd3e.1460451721.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 
ppc64le functions have a Global Entry Point (GEP) and a Local Entry
Point (LEP). While placing a probe, we always prefer the LEP since it
catches function calls through both the GEP and the LEP. In order to do
this, we fixup the function entry points during elf symbol table lookup
to point to the LEPs. This works, but breaks 'perf test kallsyms' since
the symbols loaded from the symbol table (pointing to the LEP) do not
match the symbols in kallsyms.

To fix this, we do not adjust all the symbols during symbol table load.
Instead, we note down st_other in a newly introduced arch-specific
member of perf symbol structure, and later use this to adjust the probe
trace point.

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/6be7c2b17e370100c2f79dd444509df7929bdd3e.1460451721.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf powerpc: Fix kprobe and kretprobe handling with kallsyms on ppc64le 2016-05-06T00:04:02+00:00 Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com 2016-04-12T09:10:49+00:00 239aeba764092b29dd7cab177cd47f472390622e So far, we used to treat probe point offsets as being offset from the LEP. However, userspace applications (objdump/readelf) always show disassembly and offsets from the function GEP. This is confusing to the user as we will end up probing at an address different from what the user expects when looking at the function disassembly with readelf/objdump. Fix this by changing how we modify probe address with perf. If only the function name is provided, we assume the user needs the LEP. Otherwise, if an offset is specified, we assume that the user knows the exact address to probe based on function disassembly, and so we just place the probe from the GEP offset. Finally, kretprobe was also broken with kallsyms as we were trying to specify an offset. This patch also fixes that issue. Reported-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Mark Wielaard <mjw@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/75df860aad8216bf4b9bcd10c6351ecc0e3dee54.1460451721.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 
So far, we used to treat probe point offsets as being offset from the
LEP. However, userspace applications (objdump/readelf) always show
disassembly and offsets from the function GEP. This is confusing to the
user as we will end up probing at an address different from what the
user expects when looking at the function disassembly with
readelf/objdump. Fix this by changing how we modify probe address with
perf.

If only the function name is provided, we assume the user needs the LEP.
Otherwise, if an offset is specified, we assume that the user knows the
exact address to probe based on function disassembly, and so we just
place the probe from the GEP offset.

Finally, kretprobe was also broken with kallsyms as we were trying to
specify an offset. This patch also fixes that issue.

Reported-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/75df860aad8216bf4b9bcd10c6351ecc0e3dee54.1460451721.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools powerpc: Add support for generating bpf prologue 2016-05-06T00:03:58+00:00 Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com 2016-05-05T15:23:19+00:00 4679bccaa30893ccc5be35c5c5d44f5ab60c0a08 Generalize existing macros to serve the purpose. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Wang Nan <wangnan0@huawei.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1462461799-17518-1-git-send-email-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 
Generalize existing macros to serve the purpose.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1462461799-17518-1-git-send-email-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Update x86's syscall_64.tbl, adding preadv2 & pwritev2 2016-04-26T16:15:02+00:00 Arnaldo Carvalho de Melo acme@redhat.com 2016-04-26T15:58:45+00:00 042a181086077bdb83e38626b35fb96adbe45039 Introduced in commit 4babf2c5efb7 ("x86: wire up preadv2 and pwritev2"). This will make 'perf trace' aware of them. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-vojoylgce2cetsy36446s5ny@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 
Introduced in commit 4babf2c5efb7 ("x86: wire up preadv2 and pwritev2").

This will make 'perf trace' aware of them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vojoylgce2cetsy36446s5ny@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Make the x86 clean quiet 2016-04-25T20:56:15+00:00 Jiri Olsa jolsa@kernel.org 2016-04-25T20:17:17+00:00 6404436a63a463d03ef9b5d7cd5edd371e711a95 Turn current clean output: $ make clean rm -f arch/x86/include/generated/asm/syscalls_64.c CLEAN libbpf CLEAN libapi into: $ make clean CLEAN x86 CLEAN libapi CLEAN libbpf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: TJ <linux@iam.tj> Link: http://lkml.kernel.org/r/1461615438-27894-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 
Turn current clean output:

  $ make clean
  rm -f arch/x86/include/generated/asm/syscalls_64.c
    CLEAN    libbpf
    CLEAN    libapi

into:

  $ make clean
    CLEAN    x86
    CLEAN    libapi
    CLEAN    libbpf

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: TJ <linux@iam.tj>
Link: http://lkml.kernel.org/r/1461615438-27894-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tool/perf: Add sample_reg_mask to include all perf_regs 2016-04-21T13:33:00+00:00 Madhavan Srinivasan maddy@linux.vnet.ibm.com 2016-02-20T05:02:48+00:00 bb62bad623deb7952aef13fcbe065fde5d1f03e5 Add sample_reg_mask array with pt_regs registers. This is needed for printing supported regs ( -I? option). Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Add sample_reg_mask array with pt_regs registers.
This is needed for printing supported regs ( -I? option).

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
tools/perf: Map the ID values with register names 2016-04-21T13:33:00+00:00 Anju T anju@linux.vnet.ibm.com 2016-02-20T05:02:47+00:00 dc642e8388b63a9a221903584bb6b562e5055d0d Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Map ID values with corresponding register names. These names are then
displayed when user issues perf record with the -I option
followed by perf report/script with -D option.

To test this patchset, Eg:

  $ perf record -I ls   # record machine state at interrupt
  $ perf script -D      # read the perf.data file

Sample output obtained for this patch / output looks like as follows:

  496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522:
  0xc0000000001e538c period: 1 addr: 0
  ... intr regs: mask 0x7ffffffffff ABI 64-bit
  .... r0    0xc0000000001e5e34
  .... r1    0xc000000fe733f9a0
  .... r2    0xc000000001523100
  .... r3    0xc000000ffaadeb60
  .... r4    0xc000000003456800
  .... r5    0x73a9b5e000
  .... r6    0x1e000000
  .... r7    0x0
  .... r8    0x0
  .... r9    0x0
  .... r10   0x1
  .... r11   0x0
  .... r12   0x24022822
  .... r13   0xc00000000feec180
  .... r14   0x0
  .... r15   0xc000001e4be18800
  .... r16   0x0
  .... r17   0xc000000ffaac5000
  .... r18   0xc000000fe733f8a0
  .... r19   0xc000000001523100
  .... r20   0xc00000000009fd1c
  .... r21   0xc000000fcaa69000
  .... r22   0xc0000000001e4968
  .... r23   0xc000000001523100
  .... r24   0xc000000fe733f850
  .... r25   0xc000000fcaa69000
  .... r26   0xc000000003b8fcf0
  .... r27   0xfffffffffffffead
  .... r28   0x0
  .... r29   0xc000000fcaa69000
  .... r30   0x1
  .... r31   0x0
  .... nip   0xc0000000001dd320
  .... msr   0x9000000000009032
  .... orig_r3 0xc0000000001e538c
  .... ctr   0xc00000000009d550
  .... link  0xc0000000001e5e34
  .... xer   0x0
  .... ccr   0x84022882
  .... softe 0x0
  .... trap  0xf01
  .... dar   0x0
  .... dsisr 0xf00040060000004
   ... thread: :4522:4522
   ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9
             :4522 4522 496.768515: 1 cycles: c0000000001e538c
             .perf_event_context_sched_in (/boot/vmlinux)

Signed-off-by: Anju T <anju@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
perf evsel: Do not use globals in config() 2016-04-12T01:18:20+00:00 Arnaldo Carvalho de Melo acme@redhat.com 2016-04-11T21:15:29+00:00 e68ae9cf7d734e669bc0a981b4154f70d29b5059 Instead receive a callchain_param pointer to configure callchain aspects, not doing so if NULL is passed. This will allow fine grained control over which evsels in an evlist gets callchains enabled. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 
Instead receive a callchain_param pointer to configure callchain
aspects, not doing so if NULL is passed.

This will allow fine grained control over which evsels in an evlist
gets callchains enabled.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>