linux.git/tools/pci/pcitest.c, branch master

selftests: Move PCI Endpoint tests from tools/pci to Kselftests

2025-01-21T20:17:55+00:00

This just moves the existing tests under tools/pci to
tools/testing/selftests/pci_endpoint and adjusts the paths in Makefile
accordingly. Migration to Kselftest framework will be done in subsequent
commits.

Link: https://lore.kernel.org/r/20250116171650.33585-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Bjorn Helgaas 
Tested-by: Niklas Cassel 
Reviewed-by: Niklas Cassel

misc: pci_endpoint_test: Fix IOCTL return value

2025-01-21T20:17:55+00:00

IOCTLs are supposed to return 0 for success and negative error codes for
failure. Currently, this driver is returning 0 for failure and 1 for
success, that's not correct. Hence, fix it!

Link: https://lore.kernel.org/r/20250116171650.33585-3-manivannan.sadhasivam@linaro.org
Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Reported-by: Greg Kroah-Hartman 
Closes: https://lore.kernel.org/r/YvzNg5ROnxEApDgS@kroah.com
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Bjorn Helgaas 
Tested-by: Niklas Cassel 
Reviewed-by: Damien Le Moal 
Reviewed-by: Niklas Cassel

misc: pci_endpoint_test: Add consecutive BAR test

2025-01-21T15:44:14+00:00

Add a more advanced BAR test that writes all BARs in one go, and then reads
them back and verifies that the value matches the BAR number bitwise OR'ed
with offset, this allows us to verify:

  - The BAR number was what we intended to read
  - The offset was what we intended to read

This allows us to detect potential address translation issues on the EP.

Reading back the BAR directly after writing will not allow us to detect the
case where inbound address translation on the endpoint incorrectly causes
multiple BARs to be redirected to the same memory region (within the EP).

Link: https://lore.kernel.org/r/20241116032045.2574168-2-cassel@kernel.org
Signed-off-by: Niklas Cassel 
Signed-off-by: Krzysztof Wilczyński 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Manivannan Sadhasivam

tools: PCI: Fix incorrect printf format specifiers

2024-11-20T20:20:51+00:00

Fix several incorrect printf format specifiers that misused signed and
unsigned versions.

Link: https://lore.kernel.org/r/20241112090924.287056-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Luo Yifan 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Manivannan Sadhasivam

tools: PCI: Remove unused BILLION macro

2024-09-13T22:37:06+00:00

The macro BILLION is never referenced in the code.  Remove it.

Link: https://lore.kernel.org/r/20240911060401.9230-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: zhang jiao 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Krzysztof Wilczyński

tools: PCI: Zero-initialize param

2021-08-05T10:01:30+00:00

The values in param may be random if they are not initialized, which
may cause use_dma flag set even when "-d" option is not provided
in command line. Initializing all members to 0 to solve this.

Link: https://lore.kernel.org/r/20210714132331.5200-1-yang.shunyong@gmail.com
Signed-off-by: Shunyong Yang 
Signed-off-by: Lorenzo Pieralisi 
Acked-by: Kishon Vijay Abraham I

tools: PCI: Add 'e' to clear IRQ

2020-04-02T16:57:10+00:00

Add a new command line option 'e' to invoke "PCITEST_CLEAR_IRQ"
ioctl. This can be used to clear the irqs set using the 'i' option.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Lorenzo Pieralisi

tools: PCI: Add 'd' command line option to support DMA

2020-04-02T16:57:10+00:00

Add a new command line option 'd' to use DMA for data transfers.
It should be used with read, write or copy commands.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Lorenzo Pieralisi 
Tested-by: Alan Mikhak

tools: PCI: Fix fd leakage

2019-10-29T12:04:18+00:00

We should close fd before the return of run_test.

Fixes: 3f2ed8134834 ("tools: PCI: Add a userspace tool to test PCI endpoint")
Signed-off-by: Hewenliang 
Signed-off-by: Lorenzo Pieralisi 
Acked-by: Kishon Vijay Abraham I

Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2019-07-16T03:44:49+00:00

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
     to preserve its resource assignments (Benjamin Herrenschmidt)

   - Simplify resource distribution (Nicholas Johnson)

   - Decode 32 GT/s link speed (Gustavo Pimentel)

  Virtualization:

   - Fix incorrect caching of VF config space size (Alex Williamson)

   - Fix VF driver probing sysfs knobs (Alex Williamson)

  Peer-to-peer DMA:

   - Fix dma_virt_ops check (Logan Gunthorpe)

  Altera host bridge driver:

   - Allow building as module (Ley Foon Tan)

  Armada 8K host bridge driver:

   - add PHYs support (Miquel Raynal)

  DesignWare host bridge driver:

   - Export APIs to support removable loadable module (Vidya Sagar)

   - Enable Relaxed Ordering erratum workaround only on Tegra20 &
     Tegra30 (Vidya Sagar)

  Hyper-V host bridge driver:

   - Fix use-after-free in eject (Dexuan Cui)

  Mobiveil host bridge driver:

   - Clean up and fix many issues, including non-identify mapped
     windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
     Zhiqiang)

  Qualcomm host bridge driver:

   - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)

   - Add QCS404 support (Bjorn Andersson)

   - Assert PERST for at least 100ms (Niklas Cassel)

  R-Car host bridge driver:

   - Add r8a774a1 DT support (Biju Das)

  Tegra host bridge driver:

   - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
     details) AER, GPIO-based PERST# (Manikanta Maddireddy)

   - Fix many issues, including power-on failure cases, interrupt
     masking in suspend, UPHY settings, AFI dynamic clock gating,
     pending DLL transactions (Manikanta Maddireddy)

  Xilinx host bridge driver:

   - Fix NWL Multi-MSI programming (Bharat Kumar Gogada)

  Endpoint support:

   - Fix 64bit BAR support (Alan Mikhak)

   - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)

  Bug fixes:

   - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)

   - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)

   - Ignore lockdep for sysfs "remove" (Marek Vasut)

  Misc:

   - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"

* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
  PCI: Enable NVIDIA HDA controllers
  tools: PCI: Fix installation when `make tools/pci_install`
  PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  PCI: Fix typos and whitespace errors
  PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
  PCI: mobiveil: Fix infinite-loop in the INTx handling function
  PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
  PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
  PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
  PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
  PCI: mobiveil: Clear the control fields before updating it
  PCI: mobiveil: Add configured inbound windows counter
  PCI: mobiveil: Fix the valid check for inbound and outbound windows
  PCI: mobiveil: Clean-up program_{ib/ob}_windows()
  PCI: mobiveil: Remove an unnecessary return value check
  PCI: mobiveil: Fix error return values
  PCI: mobiveil: Refactor the MEM/IO outbound window initialization
  PCI: mobiveil: Make some register updates more readable
  PCI: mobiveil: Reformat the code for readability
  dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
  ...