The array shortening may perform unnecessary array copies.
Before commit 657a3efee43a ("lib subcmd: Avoid memory leak in
exclude_cmds") this was benign, but afterwards this could lead to a
SEGV.
Fixes: 657a3efee43a29d1 ("lib subcmd: Avoid memory leak in exclude_cmds")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230707230926.841086-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf tools updates from Namhyung Kim:
"Internal cleanup:
- Refactor PMU data management to handle hybrid systems in a generic
way.
Do more work in the lexer so that legacy event types parse more
easily. A side-effect of this is that if a PMU is specified,
scanning sysfs is avoided improving start-up time.
- Fix hybrid metrics, for example, the TopdownL1 works for both
performance and efficiency cores on Intel machines. To support
this, sort and regroup events after parsing.
- Add reference count checking for the 'thread' data structure.
- Lots of fixes for memory leaks in various places thanks to the ASAN
and Ian's refcount checker.
- Reduce the binary size by replacing static variables with local or
dynamically allocated memory.
- Introduce shared_mutex for annotate data to reduce memory
footprint.
- Make filesystem access library functions more thread safe.
Test:
- Organize cpu_map tests into a single suite.
- Add metric value validation test to check if the values are within
correct value ranges.
- Add perf stat stdio output test to check if event and metric names
match.
- Add perf data converter JSON output test.
- Fix a lot of issues reported by shellcheck(1). This is a
preparation to enable shellcheck by default.
- Make the large x86 new instructions test optional at build time
using EXTRA_TESTS=1.
- Add a test for libpfm4 events.
perf script:
- Add 'dsoff' outpuf field to display offset from the DSO.
$ perf script -F comm,pid,event,ip,dsoff
ls 2695501 cycles: 152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
ls 2695501 cycles: ffffffff99045b3e ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968e107 ([kernel.kallsyms])
ls 2695501 cycles: ffffffffc1f54afb ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968382f ([kernel.kallsyms])
ls 2695501 cycles: ffffffff99e00094 ([kernel.kallsyms])
ls 2695501 cycles: 152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
ls 2695501 cycles: ffffffff992a6db0 ([kernel.kallsyms])
- Adjust width for large PID/TID values.
perf report:
- Robustify reading addr2line output for srcline by checking sentinel
output before the actual data and by using timeout of 1 second.
- Allow config terms (like 'name=ABC') with breakpoint events.
$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1
perf annotate:
- Handle x86 instruction suffix like 'l' in 'movl' generally.
- Parse instruction operands properly even with a whitespace. This is
needed for llvm-objdump output.
- Support RISC-V binutils lookup using the triplet prefixes.
- Add '<' and '>' key to navigate to prev/next symbols in TUI.
- Fix instruction association and parsing for LoongArch.
perf stat:
- Add --per-cache aggregation option, optionally specify a cache
level like `--per-cache=L2`.
$ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207\
perf bench sched messaging -p -t -l 100000 -g 8
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 8 groups == 320 threads run
Total time: 7.648 [sec]
Performance counter stats for 'system wide':
S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote
7.779171484 seconds time elapsed
- Change default (no event/metric) formatting for default metrics so
that events are hidden and the metric and group appear.
Performance counter stats for 'ls /':
1.85 msec task-clock # 0.594 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
97 page-faults # 52.517 K/sec
2,187,173 cycles # 1.184 GHz
2,474,459 instructions # 1.13 insn per cycle
531,584 branches # 287.805 M/sec
13,626 branch-misses # 2.56% of all branches
TopdownL1 # 23.5 % tma_backend_bound
# 11.5 % tma_bad_speculation
# 39.1 % tma_frontend_bound
# 25.9 % tma_retiring
- Allow --cputype option to have any PMU name (not just hybrid).
- Fix output value not to added when it runs multiple times with -r
option.
perf list:
- Show metricgroup description from JSON file called
metricgroups.json.
- Allow 'pfm' argument to list only libpfm4 events and check each
event is supported before showing it.
JSON vendor events:
- Avoid event grouping using "NO_GROUP_EVENTS" constraints. The
topdown events are correctly grouped even if no group exists.
- Add "Default" metric group to print it in the default output. And
use "DefaultMetricgroupName" to indicate the real metric group
name.
- Add AmpereOne core PMU events.
Misc:
- Define man page date correctly.
- Track exception level properly on ARM CoreSight ETM.
- Allow anonymous struct, union or enum when retrieving type names
from DWARF.
- Fix incorrect filename when calling `perf inject --jit`.
- Handle PLT size correctly on LoongArch"
* tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits)
perf test: Skip metrics w/o event name in stat STD output linter
perf test: Reorder event name checks in stat STD output linter
perf pmu: Remove a hard coded cpu PMU assumption
perf pmus: Add notion of default PMU for JSON events
perf unwind: Fix map reference counts
perf test: Set PERF_EXEC_PATH for script execution
perf script: Initialize buffer for regs_map()
perf tests: Fix test_arm_callgraph_fp variable expansion
perf symbol: Add LoongArch case in get_plt_sizes()
perf test: Remove x permission from lib/stat_output.sh
perf test: Rerun failed metrics with longer workload
perf test: Add skip list for metrics known would fail
perf test: Add metric value validation test
perf jit: Fix incorrect file name in DWARF line table
perf annotate: Fix instruction association and parsing for LoongArch
perf annotation: Switch lock from a mutex to a sharded_mutex
perf sharded_mutex: Introduce sharded_mutex
tools: Fix incorrect calculation of object size by sizeof
perf subcmd: Fix missing check for return value of malloc() in add_cmdname()
perf parse-events: Remove unneeded semicolon
...
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
The malloc() function may return NULL when it fails, which may cause null pointer deference in add_cmdname(), add Null check for return value of malloc(). Found by our static analysis tool. Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn> Acked-by: Ian Rogers <irogers@google.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20230614150118.115208-1-cymi20@fudan.edu.cn Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In situations like reading from a pipe it can be useful to have a timeout so that the caller doesn't block indefinitely. Implement a simple one based on poll. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong1@huawei.com> Link: http://lore.kernel.org/lkml/20230608061812.3715566-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple threads, such as with "perf top", may race to initialize a file system path like hugetlbfs. The racy initialization of the path leads to at least memory leaks. To avoid this initialize each fs for reading the mount point path with pthread_once. Mounting the file system may also be racy, so introduce a mutex over the function. This does mean that the path is being accessed with and without a mutex, which is inherently racy but hopefully benign, especially as there are fewer callers to fs__mount. Remove the fs__entries by directly using global variables, this was done as no argument like the index can be passed to the init once routine. Issue found and tested with "perf top" and address sanitizer. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230609224004.180988-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
exclude_cmds will shorten the cmds names array, before doing so free the removed entry. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: André Almeida <andrealmeid@igalia.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230611233610.953456-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko writes:
And we currently don't have an attach type for NETLINK BPF link.
Thankfully it's not too late to add it. I see that link_create() in
kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
have done that. Instead we need to add BPF_NETLINK attach type to enum
bpf_attach_type. And wire all that properly throughout the kernel and
libbpf itself.
This adds BPF_NETFILTER and uses it. This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.
v2: check link_attack prog type in link_create too
Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de