Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/sch_taprio.c
  d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
  dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")

net/ipv4/sysctl_net_ipv4.c
  e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
  ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko writes:

 And we currently don't have an attach type for NETLINK BPF link.
 Thankfully it's not too late to add it. I see that link_create() in
 kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
 have done that. Instead we need to add BPF_NETLINK attach type to enum
 bpf_attach_type. And wire all that properly throughout the kernel and
 libbpf itself.

This adds BPF_NETFILTER and uses it.  This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.

v2: check link_attack prog type in link_create too

Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de

Improve bpf_map__reuse_fd() logic and ensure that dup'ed map FD is
"good" (>= 3) and has O_CLOEXEC flags. Use fcntl(F_DUPFD_CLOEXEC) for
that, similarly to ensure_good_fd() helper we already use in low-level
APIs that work with bpf() syscall.

Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-2-andrii@kernel.org

Make sure that libbpf code always gets FD with O_CLOEXEC flag set,
regardless if file is open through open() or fopen(). For the latter
this means to add "e" to mode string, which is supported since pretty
ancient glibc v2.7.

Also drop the outdated TODO comment in usdt.c, which was already completed.

Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-1-andrii@kernel.org

This changes a local variable type that stores a new array id to match
the return type of btf__add_array().

Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230525001323.8554-1-inwardvessel@gmail.com

This patch updates bpf_map__set_value_size() so that if the given map is
memory mapped, it will attempt to resize the mapped region. Initial
contents of the mapped region are preserved. BTF is not required, but
after the mapping is resized an attempt is made to adjust the associated
BTF information if the following criteria is met:
 - BTF info is present
 - the map is a datasec
 - the final variable in the datasec is an array

... the resulting BTF info will be updated so that the final array
variable is associated with a new BTF array type sized to cover the
requested size.

Note that the initial resizing of the memory mapped region can succeed
while the subsequent BTF adjustment can fail. In this case, BTF info is
dropped from the map by clearing the key and value type.

Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230524004537.18614-2-inwardvessel@gmail.com

Add path_fd support for bpf_obj_pin() and bpf_obj_get() operations
(through their opts-based variants). This allows to take advantage of
new kernel-side support for O_PATH-based pin/get location specification.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org

Bump libbpf.map to v1.3.0 to start a new libbpf version cycle.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-3-andrii@kernel.org

When moving some of the test kfuncs to bpf_testmod I hit an issue
when some of the kfuncs that object uses are in module and some
in vmlinux.

The problem is that both vmlinux and module kfuncs get allocated
btf_fd_idx index into fd_array, but we store to it the BTF fd value
only for module's kfunc, not vmlinux's one because (it's zero).

Then after the program is loaded we check if fd_array[btf_fd_idx] != 0
and close the fd.

When the object has kfuncs from both vmlinux and module, the fd from
fd_array[btf_fd_idx] from previous load will be stored in there for
vmlinux's kfunc, so we close unrelated fd (of the program we just
loaded in my case).

Fixing this by storing zero to fd_array[btf_fd_idx] for vmlinux
kfuncs, so the we won't close stale fd.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-05-16

We've added 57 non-merge commits during the last 19 day(s) which contain
a total of 63 files changed, 3293 insertions(+), 690 deletions(-).

The main changes are:

1) Add precision propagation to verifier for subprogs and callbacks,
   from Andrii Nakryiko.

2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths,
   from Stanislav Fomichev.

3) Utilize pahole v1.25 for the kernel's BTF generation to filter out
   inconsistent function prototypes, from Alan Maguire.

4) Various dyn-pointer verifier improvements to relax restrictions,
   from Daniel Rosenberg.

5) Add a new bpf_task_under_cgroup() kfunc for designated task,
   from Feng Zhou.

6) Unblock tests for arm64 BPF CI after ftrace supporting direct call,
   from Florent Revest.

7) Add XDP hint kfunc metadata for RX hash/timestamp for igc,
   from Jesper Dangaard Brouer.

8) Add several new dyn-pointer kfuncs to ease their usability,
   from Joanne Koong.

9) Add in-depth LRU internals description and dot function graph,
   from Joe Stringer.

10) Fix KCSAN report on bpf_lru_list when accessing node->ref,
    from Martin KaFai Lau.

11) Only dump unprivileged_bpf_disabled log warning upon write,
    from Kui-Feng Lee.

12) Extend test_progs to directly passing allow/denylist file,
    from Stephen Veiss.

13) Fix BPF trampoline memleak upon failure attaching to fentry,
    from Yafang Shao.

14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF,
    from Yonghong Song.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits)
  bpf: Fix memleak due to fentry attach failure
  bpf: Remove bpf trampoline selector
  bpf, arm64: Support struct arguments in the BPF trampoline
  bpftool: JIT limited misreported as negative value on aarch64
  bpf: fix calculation of subseq_idx during precision backtracking
  bpf: Remove anonymous union in bpf_kfunc_call_arg_meta
  bpf: Document EFAULT changes for sockopt
  selftests/bpf: Correctly handle optlen > 4096
  selftests/bpf: Update EFAULT {g,s}etsockopt selftests
  bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
  libbpf: fix offsetof() and container_of() to work with CO-RE
  bpf: Address KCSAN report on bpf_lru_list
  bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25
  selftests/bpf: Accept mem from dynptr in helper funcs
  bpf: verifier: Accept dynptr mem as mem in helpers
  selftests/bpf: Check overflow in optional buffer
  selftests/bpf: Test allowing NULL buffer in dynptr slice
  bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)
  selftests/bpf: Add testcase for bpf_task_under_cgroup
  bpf: Add bpf_task_under_cgroup() kfunc
  ...
====================

Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>