Daniel Borkmann says:

====================
pull-request: bpf-next 2023-06-23

We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).

The main changes are:

1) Extend bpf_fib_lookup helper to allow passing the route table ID,
   from Louis DeLosSantos.

2) Fix regsafe() in verifier to call check_ids() for scalar registers,
   from Eduard Zingerman.

3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
   and a rework of bpf_cpumask_any*() kfuncs. Additionally,
   add selftests, from David Vernet.

4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
   from Gilad Sever.

5) Change bpf_link_put() to use workqueue unconditionally to fix it
   under PREEMPT_RT, from Sebastian Andrzej Siewior.

6) Follow-ups to address issues in the bpf_refcount shared ownership
   implementation, from Dave Marchevsky.

7) A few general refactorings to BPF map and program creation permissions
   checks which were part of the BPF token series, from Andrii Nakryiko.

8) Various fixes for benchmark framework and add a new benchmark
   for BPF memory allocator to BPF selftests, from Hou Tao.

9) Documentation improvements around iterators and trusted pointers,
   from Anton Protopopov.

10) Small cleanup in verifier to improve allocated object check,
    from Daniel T. Lee.

11) Improve performance of bpf_xdp_pointer() by avoiding access
    to shared_info when XDP packet does not have frags,
    from Jesper Dangaard Brouer.

12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
    from Yonghong Song.

13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
    from Jarkko Sakkinen.

14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
    from Viktor Malik.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
  bpf, docs: Document existing macros instead of deprecated
  bpf, docs: BPF Iterator Document
  selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
  selftests/bpf: Add vrf_socket_lookup tests
  bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
  bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
  bpf: Factor out socket lookup functions for the TC hookpoint.
  selftests/bpf: Set the default value of consumer_cnt as 0
  selftests/bpf: Ensure that next_cpu() returns a valid CPU number
  selftests/bpf: Output the correct error code for pthread APIs
  selftests/bpf: Use producer_cnt to allocate local counter array
  xsk: Remove unused inline function xsk_buff_discard()
  bpf: Keep BPF_PROG_LOAD permission checks clear of validations
  bpf: Centralize permissions checks for all BPF map types
  bpf: Inline map creation logic in map_create() function
  bpf: Move unprivileged checks into map_create() and bpf_prog_load()
  bpf: Remove in_atomic() from bpf_link_put().
  selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
  bpf: Verify scalar ids mapping in regsafe() using check_ids()
  selftests/bpf: Check if mark_chain_precision() follows scalar ids
  ...
====================

Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/sch_taprio.c
  d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
  dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")

net/ipv4/sysctl_net_ipv4.c
  e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
  ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-06-07

We've added 7 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 112 insertions(+), 7 deletions(-).

The main changes are:

1) Fix a use-after-free in BPF's task local storage, from KP Singh.

2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa.

3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet.

4) UAPI fix for BPF_NETFILTER before final kernel ships,
   from Florian Westphal.

5) Fix map-in-map array_map_gen_lookup code generation where elem_size was
   not being set for inner maps, from Rhys Rustad-Elliott.

6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion,
   from Yonghong Song.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add extra path pointer check to d_path helper
  selftests/bpf: Fix sockopt_sk selftest
  bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
  selftests/bpf: Add access_inner_map selftest
  bpf: Fix elem_size not being set for inner maps
  bpf: Fix UAF in task local storage
  bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready()
====================

Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko writes:

 And we currently don't have an attach type for NETLINK BPF link.
 Thankfully it's not too late to add it. I see that link_create() in
 kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
 have done that. Instead we need to add BPF_NETLINK attach type to enum
 bpf_attach_type. And wire all that properly throughout the kernel and
 libbpf itself.

This adds BPF_NETFILTER and uses it.  This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.

v2: check link_attack prog type in link_create too

Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/sfc/tc.c
  622ab656344a ("sfc: fix error unwinds in TC offload")
  b6583d5e9e94 ("sfc: support TC decap rules matching on enc_src_port")

net/mptcp/protocol.c
  5b825727d087 ("mptcp: add annotations around msk->subflow accesses")
  e76c8ef5cc5b ("mptcp: refactor mptcp_stream_accept()")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.

A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.

When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.

If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.

The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.

This functionality is useful in containerized environments.

For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.

This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.

As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.

When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.

Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-05-26

We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).

The main changes are:

1) Add the capability to destroy sockets in BPF through a new kfunc,
   from Aditi Ghag.

2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
   from Andrii Nakryiko.

3) Add capability for libbpf to resize datasec maps when backed via mmap,
   from JP Kobryn.

4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
   from Jiri Olsa.

5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
   from Magnus Karlsson.

6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
   via bpftool, from Yafang Shao.

7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
   from Yonghong Song.

8) Extend bpftool to specify netdevice for resolving XDP hints,
   from Larysa Zaremba.

9) Document masking in shift operations for the insn set document,
   from Dave Thaler.

10) Extend BPF selftests to check xdp_feature support for bond driver,
    from Lorenzo Bianconi.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
  bpf: Fix bad unlock balance on freeze_mutex
  libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
  libbpf: Ensure libbpf always opens files with O_CLOEXEC
  selftests/bpf: Check whether to run selftest
  libbpf: Change var type in datasec resize func
  bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
  libbpf: Selftests for resizing datasec maps
  libbpf: Add capability for resizing datasec maps
  selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
  libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
  bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
  libbpf: Start v1.3 development cycle
  bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
  bpftool: Specify XDP Hints ifname when loading program
  selftests/bpf: Add xdp_feature selftest for bond device
  selftests/bpf: Test bpf_sock_destroy
  selftests/bpf: Add helper to get port using getsockname
  bpf: Add bpf_sock_destroy kfunc
  bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
  bpf: udp: Implement batching for sockets iterator
  ...
====================

Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Picking the changes from:

  3632679d9e4f879f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")

That includes a define (IP_PROTOCOL) that isn't being used in generating
any id -> string table used by 'perf trace'.

Addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/lkml/ZHD/Ms0DMq7viaq+@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Current UAPI of BPF_OBJ_PIN and BPF_OBJ_GET commands of bpf() syscall
forces users to specify pinning location as a string-based absolute or
relative (to current working directory) path. This has various
implications related to security (e.g., symlink-based attacks), forces
BPF FS to be exposed in the file system, which can cause races with
other applications.

One of the feedbacks we got from folks working with containers heavily
was that inability to use purely FD-based location specification was an
unfortunate limitation and hindrance for BPF_OBJ_PIN and BPF_OBJ_GET
commands. This patch closes this oversight, adding path_fd field to
BPF_OBJ_PIN and BPF_OBJ_GET UAPI, following conventions established by
*at() syscalls for dirfd + pathname combinations.

This now allows interesting possibilities like working with detached BPF
FS mount (e.g., to perform multiple pinnings without running a risk of
someone interfering with them), and generally making pinning/getting
more secure and not prone to any races and/or security attacks.

This is demonstrated by a selftest added in subsequent patch that takes
advantage of new mount APIs (fsopen, fsconfig, fsmount) to demonstrate
creating detached BPF FS mount, pinning, and then getting BPF map out of
it, all while never exposing this private instance of BPF FS to outside
worlds.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org

  ddc65971bb677aa9 ("prctl: add PR_GET_AUXV to copy auxv to userspace")

To pick the changes in:

That don't result in any changes in tooling:

  $ tools/perf/trace/beauty/prctl_option.sh > before
  $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
  $ tools/perf/trace/beauty/prctl_option.sh > after
  $ diff -u before after
  $

This actually adds a new prctl arg, but it has to be dealt with
differently, as it is not in sequence with the other arguments.

Just silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
  diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>