linux.git/sound/firewire/dice, branch v4.9

ALSA: firewire: constify snd_pcm_ops structures

2016-09-02T09:50:11+00:00

Check for snd_pcm_ops structures that are only stored in the ops field of a
snd_soc_platform_driver structure or passed as the third argument to
snd_pcm_set_ops.  The corresponding field or parameter is declared const,
so snd_pcm_ops structures that have this property can be declared as const
also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// 
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct snd_pcm_ops i@p = { ... };

@ok1@
identifier r.i;
struct snd_soc_platform_driver e;
position p;
@@
e.ops = &i@p;

@ok2@
identifier r.i;
expression e1, e2;
position p;
@@
snd_pcm_set_ops(e1, e2, &i@p)

@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct snd_pcm_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct snd_pcm_ops i = { ... };
// 

Signed-off-by: Julia Lawall 
Reviewed-by: Takashi Sakamoto 
Acked-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai

ALSA: dice: add support for M-Audio Profire 610 and perhaps 2626

2016-05-08T09:17:37+00:00

M-Audio Profire 610 has an unexpected value in version field of its config
ROM, thus ALSA dice driver is not assigned to the model due to a mismatch
of modalias.

This commit adds an entry to support the model. I expect the entry is
also for Profire 2626.

I note that Profire 610 uses TCD2220 (so-called Dice Jr.), and supports a
part of Extended Application Protocol (EAP).

$ cd linux-firewire-utils/src
$ ./crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               ------------------------------------------------------------
400  04047689  bus_info_length 4, crc_length 4, crc 30345
404  31333934  bus_name "1394"
408  e0ff8112  irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
               max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c  000d6c04  company_id 000d6c     |
410  04400002  device_id 0404400002  | EUI-64 000d6c0404400002

               root directory
               ------------------------------------------------------------
414  000695fe  directory_length 6, crc 38398
418  03000d6c  vendor
41c  8100000a  --> descriptor leaf at 444
420  17000011  model
424  8100000d  --> descriptor leaf at 458
428  0c0087c0  node capabilities per IEEE 1394
42c  d1000001  --> unit directory at 430

               unit directory at 430
               ------------------------------------------------------------
430  0004fb14  directory_length 4, crc 64276
434  12000d6c  specifier id
438  130100d1  version
43c  17000011  model
440  8100000c  --> descriptor leaf at 470

               descriptor leaf at 444
               ------------------------------------------------------------
444  0004b8e4  leaf_length 4, crc 47332
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  4d2d4175  "M-Au"
454  64696f00  "dio"

               descriptor leaf at 458
               ------------------------------------------------------------
458  00053128  leaf_length 5, crc 12584
45c  00000000  textual descriptor
460  00000000  minimal ASCII
464  50726f46  "ProF"
468  69726520  "ire "
46c  36313000  "610"

               descriptor leaf at 470
               ------------------------------------------------------------
470  00053128  leaf_length 5, crc 12584
474  00000000  textual descriptor
478  00000000  minimal ASCII
47c  50726f46  "ProF"
480  69726520  "ire "
484  36313000  "610"

$ cat /proc/asound/card1/dice
sections:
  global: offset 10, size 90
  tx: offset 100, size 142
  rx: offset 242, size 282
  ext_sync: offset 524, size 4
  unused2: offset 0, size 0
global:
  owner: ffc0:000100000000
  notification: 00000040
  nick name: FW610
  clock select: internal 48000
  enable: 1
  status: locked 48000
  ext status: 00000040
  sample rate: 48000
  version: 1.0.4.0
  clock caps: 32000 44100 48000 88200 96000 176400 192000 aes1 aes4 aes adat tdif wc arx1 arx2 internal
  clock source names: SPDIF\AES34\AES56\TOS\AES_ANY\ADAT\ADAT_AUX\Word Clock\Unused\Unused\Unused\Unused\Internal\\
  ...

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: firewire-lib: add new function to schedule a work for sound card registration

2016-03-31T13:36:18+00:00

In former commit, ALSA dice driver postpone sound card registration after
IEEE 1394 bus is calm. This idea has advantages for the other drivers.

This commit adds a helper function for it to firewire-lib module. The
function is really for the specific purpose. Callers should initialize
delayed work structure with callback function.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: dice: simplify unit probe processing

2016-03-31T13:36:17+00:00

In former commit, ALSA dice driver doesn't generate kernel warnings
when unplugging units before initializing stream data.

This commit moves the initialization to delayed registration of sound
card, to simplify unit probe processing.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: dice: fix memory leak when unplugging

2016-03-28T07:32:57+00:00

When sound card is going to be released, dice private data is
also released. Then all of data should be released. However,
stream data is not released. This causes memory leak when
unplugging dice unit.

This commit fixes the bug.

Fixes: 4bdc495c87b3('ALSA: dice: handle several PCM substreams when any isochronous streams are available')
Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: dice: use structure to represent register parameters instead of array with basic type element

2016-03-10T14:44:39+00:00

In dice interface, two blocks of register are accessible via IEEE 1394
asynchronous transaction to represent the number of supported isochronous
streams and the number of quadlets for stream information.

Current ALSA dice driver uses array with 'unsigned int' element for
temporary cache of these information. But using structure is preferable
for begin easily comprehensible.

This commit applies a local structure for this aim.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: dice: force to add two pcm devices for listed models

2016-03-09T15:20:58+00:00

Some models reduce the number of available isochronous streams for higher
sampling transfer frequency. Such models bring an issue about how to add
PCM substreams. When at lower sampling transfer frequency, the
models reports whole available streams, thus this driver can add enough
number of PCM substreams at probing time. On the other hand, at higher
sampling transfer frequency, this driver can just add reduced number of
PCM substreams. After probed, even if the sampling transfer frequency is
changed to lower rate, fewer PCM substreams are actually available. This
is inconvenience.

For the reason, this commit adds a list so that this driver assume models
on the list to have two pairs of PCM substreams. This list keeps the name
of model in which the number of available streams differs depending on
sampling transfer frequency.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: dice: handle several PCM substreams when any isochronous streams are available

2016-03-09T15:20:57+00:00

In former commits, ALSA dice driver can handle available isochronous
streams. This commit adds support for several PCM substreams on the
streams.

The additional PCM substreams are available via another ALSA PCM character
devices so that one ALSA PCM application can handle them without cumbersome
operations. For example, two PCM substreams are available on each stream,
two ALSA character devices are added for them. In configuration space of
alsa-lib, it's represented with 'hw:0,0' and 'hw:0,1'.

The PCM substreams are constraint to parameters of the corresponding
streams. If the PCM substreams are unavailable for some reasons,
open(2) to ALSA PCM character device returns error and reports ENXIO.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: dice: handle whole available isochronous streams

2016-03-09T15:20:57+00:00

This commit enables ALSA dice driver to handle whole available streams.

In Dice, certain registers represent the number of available streams at
current sampling transfer frequency for both directions. The parameters
of each stream are represented in a block of register. This block is
aligned sequentially. These streams start simultaneously by writing
enable bit to a register.

This commit operates these registers when starting/stopping streams.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: dice: have two sets of isochronous resources/streams

2016-03-09T15:20:56+00:00

Currently ALSA dice driver handles a pair of isochronous resources for
IEC 61883-1/6 packet streaming. While, according to some documents about
ASICs named as 'Dice', several isochronous streams are available.

Here, I start to describe ASICs produced under 'Dice' name.
 * Dice II (designed by wavefront semiconductor, including TCAT's IP)
   * STD (with limited functionality of DTCP)
   * CP  (with full functionality of DTCP)
 * TCD2210/2210-E (so-called 'Dice Mini')
 * TCD2220/2220-E (so-called 'Dice Jr.')
 * TCD3070-CH (so-called 'Dice III')

Some documents are public and we can see hardware design of them. We can
find some articles about hardware internal register definitions
(not registers exported to IEEE 1394 bus).

* DICE II User Guide
  * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 6.1: AVS Audio Receiver Memory Map
        * ARX1-ARX4
    * 6.2 AVS Audio Transmitters
      * Table 6.2: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* TCD22xx User Guide
  * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 66: AVS Audio Receiver Memory Map
        * ARX1, ARX2
    * 6/2 AVS Audio Transmitters
      * Table 67: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* DICE III
  * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf
    * Dual stream 63 channel transmitter/receiver

For Dice II and TCD22xx series, maximum 16 data channels are transferred in
an AMDTP packet, while for Dice III, maximum 32 data channels are
transferred.

According to the design of the series of these ASICs, this commit allows
this driver to handle additional set of isochronous resources. For
practical reason, two pair of isochronous resources are added. As of this
commit, this driver still use a pair of the first isochronous resources.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai