linux.git/security/keys/keyring.c, branch v4.8

KEYS: Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTED

2016-04-11T21:44:15+00:00

Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTED as they're no longer
meaningful.  Also we can drop the trusted flag from the preparse structure.

Given this, we no longer need to pass the key flags through to
restrict_link().

Further, we can now get rid of keyring_restrict_trusted_only() also.

Signed-off-by: David Howells

KEYS: Add a facility to restrict new links into a keyring

2016-04-11T21:37:37+00:00

Add a facility whereby proposed new links to be added to a keyring can be
vetted, permitting them to be rejected if necessary.  This can be used to
block public keys from which the signature cannot be verified or for which
the signature verification fails.  It could also be used to provide
blacklisting.

This affects operations like add_key(), KEYCTL_LINK and KEYCTL_INSTANTIATE.

To this end:

 (1) A function pointer is added to the key struct that, if set, points to
     the vetting function.  This is called as:

	int (*restrict_link)(struct key *keyring,
			     const struct key_type *key_type,
			     unsigned long key_flags,
			     const union key_payload *key_payload),

     where 'keyring' will be the keyring being added to, key_type and
     key_payload will describe the key being added and key_flags[*] can be
     AND'ed with KEY_FLAG_TRUSTED.

     [*] This parameter will be removed in a later patch when
     	 KEY_FLAG_TRUSTED is removed.

     The function should return 0 to allow the link to take place or an
     error (typically -ENOKEY, -ENOPKG or -EKEYREJECTED) to reject the
     link.

     The pointer should not be set directly, but rather should be set
     through keyring_alloc().

     Note that if called during add_key(), preparse is called before this
     method, but a key isn't actually allocated until after this function
     is called.

 (2) KEY_ALLOC_BYPASS_RESTRICTION is added.  This can be passed to
     key_create_or_update() or key_instantiate_and_link() to bypass the
     restriction check.

 (3) KEY_FLAG_TRUSTED_ONLY is removed.  The entire contents of a keyring
     with this restriction emplaced can be considered 'trustworthy' by
     virtue of being in the keyring when that keyring is consulted.

 (4) key_alloc() and keyring_alloc() take an extra argument that will be
     used to set restrict_link in the new key.  This ensures that the
     pointer is set before the key is published, thus preventing a window
     of unrestrictedness.  Normally this argument will be NULL.

 (5) As a temporary affair, keyring_restrict_trusted_only() is added.  It
     should be passed to keyring_alloc() as the extra argument instead of
     setting KEY_FLAG_TRUSTED_ONLY on a keyring.  This will be replaced in
     a later patch with functions that look in the appropriate places for
     authoritative keys.

Signed-off-by: David Howells 
Reviewed-by: Mimi Zohar

KEYS: Merge the type-specific data with the payload data

2015-10-21T14:18:36+00:00

Merge the type-specific data with the payload data into one four-word chunk
as it seems pointless to keep them separate.

Use user_key_payload() for accessing the payloads of overloaded
user-defined keys.

Signed-off-by: David Howells 
cc: linux-cifs@vger.kernel.org
cc: ecryptfs@vger.kernel.org
cc: linux-ext4@vger.kernel.org
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-ima-devel@lists.sourceforge.net

KEYS: ensure we free the assoc array edit if edit is valid

2015-07-28T03:08:23+00:00

__key_link_end is not freeing the associated array edit structure
and this leads to a 512 byte memory leak each time an identical
existing key is added with add_key().

The reason the add_key() system call returns okay is that
key_create_or_update() calls __key_link_begin() before checking to see
whether it can update a key directly rather than adding/replacing - which
it turns out it can.  Thus __key_link() is not called through
__key_instantiate_and_link() and __key_link_end() must cancel the edit.

CVE-2015-1333

Signed-off-by: Colin Ian King 
Signed-off-by: David Howells 
Signed-off-by: James Morris

KEYS: request_key() should reget expired keys rather than give EKEYEXPIRED

2014-12-01T22:52:53+00:00

Since the keyring facility can be viewed as a cache (at least in some
applications), the local expiration time on the key should probably be viewed
as a 'needs updating after this time' property rather than an absolute 'anyone
now wanting to use this object is out of luck' property.

Since request_key() is the main interface for the usage of keys, this should
update or replace an expired key rather than issuing EKEYEXPIRED if the local
expiration has been reached (ie. it should refresh the cache).

For absolute conditions where refreshing the cache probably doesn't help, the
key can be negatively instantiated using KEYCTL_REJECT_KEY with EKEYEXPIRED
given as the error to issue.  This will still cause request_key() to return
EKEYEXPIRED as that was explicitly set.

In the future, if the key type has an update op available, we might want to
upcall with the expired key and allow the upcall to update it.  We would pass
a different operation name (the first column in /etc/request-key.conf) to the
request-key program.

request_key() returning EKEYEXPIRED is causing an NFS problem which Chuck
Lever describes thusly:

	After about 10 minutes, my NFSv4 functional tests fail because the
	ownership of the test files goes to "-2". Looking at /proc/keys
	shows that the id_resolv keys that map to my test user ID have
	expired. The ownership problem persists until the expired keys are
	purged from the keyring, and fresh keys are obtained.

	I bisected the problem to 3.13 commit b2a4df200d57 ("KEYS: Expand
	the capacity of a keyring"). This commit inadvertantly changes the
	API contract of the internal function keyring_search_aux().

	The root cause appears to be that b2a4df200d57 made "no state check"
	the default behavior. "No state check" means the keyring search
	iterator function skips checking the key's expiry timeout, and
	returns expired keys.  request_key_and_link() depends on getting
	an -EAGAIN result code to know when to perform an upcall to refresh
	an expired key.

This patch can be tested directly by:

	keyctl request2 user debug:fred a @s
	keyctl timeout %user:debug:fred 3
	sleep 4
	keyctl request2 user debug:fred a @s

Without the patch, the last command gives error EKEYEXPIRED, but with the
command it gives a new key.

Reported-by: Carl Hetherington 
Reported-by: Chuck Lever 
Signed-off-by: David Howells 
Tested-by: Chuck Lever

KEYS: Simplify KEYRING_SEARCH_{NO,DO}_STATE_CHECK flags

2014-12-01T22:52:50+00:00

Simplify KEYRING_SEARCH_{NO,DO}_STATE_CHECK flags to be two variations of the
same flag.  They are effectively mutually exclusive and one or the other
should be provided, but not both.

Keyring cycle detection and key possession determination are the only things
that set NO_STATE_CHECK, except that neither flag really does anything there
because neither purpose makes use of the keyring_search_iterator() function,
but rather provides their own.

For cycle detection we definitely want to check inside of expired keyrings,
just so that we don't create a cycle we can't get rid of.  Revoked keyrings
are cleared at revocation time and can't then be reused, so shouldn't be a
problem either way.

For possession determination, we *might* want to validate each keyring before
searching it: do you possess a key that's hidden behind an expired or just
plain inaccessible keyring?  Currently, the answer is yes.  Note that you
cannot, however, possess a key behind a revoked keyring because they are
cleared on revocation.

keyring_search() sets DO_STATE_CHECK, which is correct.

request_key_and_link() currently doesn't specify whether to check the key
state or not - but it should set DO_STATE_CHECK.

key_get_instantiation_authkey() also currently doesn't specify whether to
check the key state or not - but it probably should also set DO_STATE_CHECK.

Signed-off-by: David Howells 
Tested-by: Chuck Lever

KEYS: Make the key matching functions return bool

2014-09-16T16:36:08+00:00

Make the key matching functions pointed to by key_match_data::cmp return bool
rather than int.

Signed-off-by: David Howells 
Acked-by: Vivek Goyal

KEYS: Remove key_type::match in favour of overriding default by match_preparse

2014-09-16T16:36:06+00:00

A previous patch added a ->match_preparse() method to the key type.  This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.

The key_type::match op is then redundant and can be removed, as can the
user_match() function.

Signed-off-by: David Howells 
Acked-by: Vivek Goyal

KEYS: Preparse match data

2014-09-16T16:36:02+00:00

Preparse the match data.  This provides several advantages:

 (1) The preparser can reject invalid criteria up front.

 (2) The preparser can convert the criteria to binary data if necessary (the
     asymmetric key type really wants to do binary comparison of the key IDs).

 (3) The preparser can set the type of search to be performed.  This means
     that it's not then a one-off setting in the key type.

 (4) The preparser can set an appropriate comparator function.

Signed-off-by: David Howells 
Acked-by: Vivek Goyal

KEYS: keyring: Provide key preparsing

2014-07-22T20:46:51+00:00

Provide key preparsing in the keyring so that we can make preparsing
mandatory.  For keyrings, however, only an empty payload is permitted.

Signed-off-by: David Howells 
Acked-by: Steve Dickson 
Acked-by: Jeff Layton