linux.git/scripts, branch v5.2-rc1

kconfig: use 'else ifneq' for Makefile to improve readability

2019-05-19T00:34:35+00:00

'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81
or later, which is the requirement for building the kernel since
commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81").

Use it to improve the readability.

Signed-off-by: Masahiro Yamada

kbuild: check uniqueness of module names

2019-05-18T06:35:02+00:00

In the recent build test of linux-next, Stephen saw a build error
caused by a broken .tmp_versions/*.mod file:

  https://lkml.org/lkml/2019/5/13/991

drivers/net/phy/asix.ko and drivers/net/usb/asix.ko have the same
basename, and there is a race in generating .tmp_versions/asix.mod

Kbuild has not checked this before, and it suddenly shows up with
obscure error messages when this kind of race occurs.

Non-unique module names cause various sort of problems, but it is
not trivial to catch them by eyes.

Hence, this script.

It checks not only real modules, but also built-in modules (i.e.
controlled by tristate CONFIG option, but currently compiled with =y).
Non-unique names for built-in modules also cause problems because
/sys/modules/ would fall over.

For the latest kernel, I tested "make allmodconfig all" (or more
quickly "make allyesconfig modules"), and it detected the following:

warning: same basename if the following are built as modules:
  drivers/regulator/88pm800.ko
  drivers/mfd/88pm800.ko
warning: same basename if the following are built as modules:
  drivers/gpu/drm/bridge/adv7511/adv7511.ko
  drivers/media/i2c/adv7511.ko
warning: same basename if the following are built as modules:
  drivers/net/phy/asix.ko
  drivers/net/usb/asix.ko
warning: same basename if the following are built as modules:
  fs/coda/coda.ko
  drivers/media/platform/coda/coda.ko
warning: same basename if the following are built as modules:
  drivers/net/phy/realtek.ko
  drivers/net/dsa/realtek.ko

Reported-by: Stephen Rothwell 
Signed-off-by: Masahiro Yamada 
Reviewed-by: Kees Cook 
Reviewed-by: Stephen Rothwell 
Reviewed-by: Lucas De Marchi

kconfig: Terminate menu blocks with a comment in the generated config

2019-05-18T06:31:24+00:00

Currently menu blocks start with a pretty header but end with nothing in
the generated config. So next config options stick together with the
options from the menu block.

Let's terminate menu blocks in the generated config with a comment and
a newline if needed. Example:

...
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y
...

Signed-off-by: Alexander Popov 
Reviewed-by: Kees Cook 
Signed-off-by: Masahiro Yamada

kbuild: remove 'addtree' and 'flags' magic for header search paths

2019-05-18T02:49:57+00:00

The 'addtree' and 'flags' in scripts/Kbuild.include are so compilecated
and ugly.

As I mentioned in [1], Kbuild should stop automatic prefixing of header
search path options.

I fixed up (almost) all Makefiles in the kernel. Now 'addtree' and
'flags' have been removed.

Kbuild still caters to add $(srctree)/$(src) and $(objtree)/$(obj)
to the header search path for O= building, but never touches extra
compiler options from ccflags-y etc.

[1]: https://patchwork.kernel.org/patch/9632347/

Signed-off-by: Masahiro Yamada

treewide: prefix header search paths with $(srctree)/

2019-05-18T02:49:57+00:00

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/

Signed-off-by: Masahiro Yamada

kbuild: terminate Kconfig when $(CC) or $(LD) is missing

2019-05-18T02:49:55+00:00

If the compiler specified by $(CC) is not present, the Kconfig stage
sprinkles 'not found' messages, then succeeds.

  $ make CROSS_COMPILE=foo defconfig
  /bin/sh: 1: foogcc: not found
  /bin/sh: 1: foogcc: not found
  *** Default configuration is based on 'x86_64_defconfig'
  ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
  ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
  init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
  #
  # configuration written to .config
  #

Terminate parsing files immediately if $(CC) or $(LD) is not found.
"make *config" will fail more nicely.

  $ make CROSS_COMPILE=foo defconfig
  *** Default configuration is based on 'x86_64_defconfig'
  scripts/Kconfig.include:34: compiler 'foogcc' not found
  make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
  make: *** [Makefile;557: defconfig] Error 2

Signed-off-by: Masahiro Yamada

kbuild: add all Clang-specific flags unconditionally

2019-05-18T02:49:53+00:00

We do not support old Clang versions. Upgrade your clang version
if any of these flags is unsupported.

Let's add all flags inside ifdef CONFIG_CC_IS_CLANG unconditionally.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Sedat Dilek 
Reviewed-by: Nathan Chancellor 
Tested-by: Nick Desaulniers

kbuild: add some extra warning flags unconditionally

2019-05-18T02:49:53+00:00

These flags are documented in the GCC 4.6 manual, and recognized by
Clang as well. Let's rip off the cc-option / cc-disable-warning switches.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Nathan Chancellor 
Tested-by: Nick Desaulniers

Merge tag 'kconfig-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2019-05-15T16:06:14+00:00

Pull Kconfig updates from Masahiro Yamada:

 - error out if a user specifies a directory instead of a file from
   "Save" menu of GUI interfaces

 - do not overwrite .config if there is no change in the configuration

 - create parent directories as needed when a user specifies a new file
   path from "Save" menu of menuconfig/nconfig

 - fix potential buffer overflow

 - some trivial cleanups

* tag 'kconfig-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: make conf_get_autoconfig_name() static
  kconfig: use snprintf for formatting pathnames
  kconfig: remove useless NULL pointer check in conf_write_dep()
  kconfig: make parent directories for the saved .config as needed
  kconfig: do not write .config if the content is the same
  kconfig: do not accept a directory for configuration output
  kconfig: remove trailing whitespaces
  kconfig: Make nconf-cfg.sh executable

scripts/gdb: print cached rate in lx-clk-summary

2019-05-15T02:52:52+00:00

The clk rate is always stored in clk_core but might be out of date and
require calls to update from hardware.

Deal with that case by printing a (c) suffix.

Link: http://lkml.kernel.org/r/1a474318982a5f0125f2360c4161029b17f56bd1.1556881728.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez 
Cc: Jan Kiszka 
Cc: Jason Wessel 
Cc: Kieran Bingham 
Cc: Stephen Boyd 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds