linux.git/scripts, branch v4.12-rc2 Linux kernel source tree Merge tag 'devicetree-fixes-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2017-05-19T22:03:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-05-19T22:03:24+00:00 1fbbed4137de93e02fc62776b8bf08a2d9ae1141 Pull DeviceTree fixes from Rob Herring: - fix missing allocation failure handling in fdt code - fix dtc compile error on 32-bit hosts - revert bad sparse changes causing GCC7 warnings * tag 'devicetree-fixes-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fdt: add missing allocation-failure check dtc: check.c fix compile error Partially Revert "of: fix sparse warnings in fdt, irq, reserved mem, and resolver code" 
Pull DeviceTree fixes from Rob Herring:

 - fix missing allocation failure handling in fdt code

 - fix dtc compile error on 32-bit hosts

 - revert bad sparse changes causing GCC7 warnings

* tag 'devicetree-fixes-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fdt: add missing allocation-failure check
  dtc: check.c fix compile error
  Partially Revert "of: fix sparse warnings in fdt, irq, reserved mem, and resolver code"
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2017-05-19T20:36:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-05-19T20:36:56+00:00 f538a82c075ba3d31e7691a361f28795eff0a786 Pull ARM SoC fixes from Olof Johansson: "We had a small batch of fixes before -rc1, but here is a larger one. It contains a backmerge of 4.12-rc1 since some of the downstream branches we merge had that as base; at the same time we already had merged contents before -rc1 and rebase wasn't the right solution. A mix of random smaller fixes and a few things worth pointing out: - We've started telling people to avoid cross-tree shared branches if all they're doing is picking up one or two DT-used constants from a shared include file, and instead to use the numeric values on first submission. Follow-up moving over to symbolic names are sent in right after -rc1, i.e. here. It's only a few minor patches of this type. - Linus Walleij and others are resurrecting the 'Gemini' platform, and wanted a cut-down platform-specific defconfig for it. So I picked that up for them. - Rob Herring ran 'savedefconfig' on arm64, it's a bit churny but it helps people to prepare patches since it's a pain when defconfig and current savedefconfig contents differs too much. - Devicetree additions for some pinctrl drivers for Armada that were merged this window. I'd have preferred to see those earlier but it's not a huge deail. The biggest change worth pointing out though since it's touching other parts of the tree: We added prefixes to be used when cross-including DT contents between arm64 and arm, allowing someone to #include <arm/foo.dtsi> from arm64, and likewise. As part of that, we needed arm/foo.dtsi to work on arm as well. The way I suggested this to Heiko resulted in a recursive symlink. Instead, I've now moved it out of arch/*/boot/dts/include, into a shared location under scripts/dtc. While I was at it, I consolidated so all architectures now behave the same way in this manner. Rob Herring (DT maintainer) has acked it. I cc:d most other arch maintainers but nobody seems to care much; it doesn't really affect them since functionality is unchanged for them by default" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) arm64: dts: rockchip: fix include reference firmware: ti_sci: fix strncat length check ARM: remove duplicate 'const' annotations' arm64: defconfig: enable options needed for QCom DB410c board arm64: defconfig: sync with savedefconfig ARM: configs: add a gemini defconfig devicetree: Move include prefixes from arch to separate directory ARM: dts: dra7: Reduce cpu thermal shutdown temperature memory: omap-gpmc: Fix debug output for access width ARM: dts: LogicPD Torpedo: Fix camera pin mux ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES ARM: dts: gta04: fix polarity of clocks for mcbsp4 ARM: dts: dra7: Add power hold and power controller properties to palmas soc: imx: add PM dependency for IMX7_PM_DOMAINS ARM: dts: imx6sx-sdb: Remove OPP override ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin soc: bcm: brcmstb: Correctly match 7435 SoC tee: add ARM_SMCCC dependency ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable ARM64: dts: mediatek: configure some fixed mmc parameters ... 
Pull ARM SoC fixes from Olof Johansson:
 "We had a small batch of fixes before -rc1, but here is a larger one.
  It contains a backmerge of 4.12-rc1 since some of the downstream
  branches we merge had that as base; at the same time we already had
  merged contents before -rc1 and rebase wasn't the right solution.

  A mix of random smaller fixes and a few things worth pointing out:

   - We've started telling people to avoid cross-tree shared branches if
     all they're doing is picking up one or two DT-used constants from a
     shared include file, and instead to use the numeric values on first
     submission. Follow-up moving over to symbolic names are sent in
     right after -rc1, i.e. here. It's only a few minor patches of this
     type.

   - Linus Walleij and others are resurrecting the 'Gemini' platform,
     and wanted a cut-down platform-specific defconfig for it. So I
     picked that up for them.

   - Rob Herring ran 'savedefconfig' on arm64, it's a bit churny but it
     helps people to prepare patches since it's a pain when defconfig
     and current savedefconfig contents differs too much.

   - Devicetree additions for some pinctrl drivers for Armada that were
     merged this window. I'd have preferred to see those earlier but
     it's not a huge deail.

  The biggest change worth pointing out though since it's touching other
  parts of the tree: We added prefixes to be used when cross-including
  DT contents between arm64 and arm, allowing someone to #include
  <arm/foo.dtsi> from arm64, and likewise. As part of that, we needed
  arm/foo.dtsi to work on arm as well. The way I suggested this to Heiko
  resulted in a recursive symlink.

  Instead, I've now moved it out of arch/*/boot/dts/include, into a
  shared location under scripts/dtc. While I was at it, I consolidated
  so all architectures now behave the same way in this manner.

  Rob Herring (DT maintainer) has acked it. I cc:d most other arch
  maintainers but nobody seems to care much; it doesn't really affect
  them since functionality is unchanged for them by default"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  arm64: dts: rockchip: fix include reference
  firmware: ti_sci: fix strncat length check
  ARM: remove duplicate 'const' annotations'
  arm64: defconfig: enable options needed for QCom DB410c board
  arm64: defconfig: sync with savedefconfig
  ARM: configs: add a gemini defconfig
  devicetree: Move include prefixes from arch to separate directory
  ARM: dts: dra7: Reduce cpu thermal shutdown temperature
  memory: omap-gpmc: Fix debug output for access width
  ARM: dts: LogicPD Torpedo: Fix camera pin mux
  ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES
  ARM: dts: gta04: fix polarity of clocks for mcbsp4
  ARM: dts: dra7: Add power hold and power controller properties to palmas
  soc: imx: add PM dependency for IMX7_PM_DOMAINS
  ARM: dts: imx6sx-sdb: Remove OPP override
  ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
  soc: bcm: brcmstb: Correctly match 7435 SoC
  tee: add ARM_SMCCC dependency
  ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
  ARM64: dts: mediatek: configure some fixed mmc parameters
  ...
devicetree: Move include prefixes from arch to separate directory 2017-05-19T06:55:48+00:00 Olof Johansson olof@lixom.net 2017-05-13T03:13:26+00:00 d5d332d3f7e8435e264a71b90178dee69428d630 We use a directory under arch/$ARCH/boot/dts as an include path that has links outside of the subtree to find dt-bindings from under include/dt-bindings. That's been working well, but new DT architectures haven't been adding them by default. Recently there's been a desire to share some of the DT material between arm and arm64, which originally caused developers to create symlinks or relative includes between the subtrees. This isn't ideal -- it breaks if the DT files aren't stored in the exact same hierarchy as the kernel tree, and generally it's just icky. As a somewhat cleaner solution we decided to add a $ARCH/ prefix link once, and allow DTS files to reference dtsi (and dts) files in other architectures that way. Original approach was to create these links under each architecture, but it lead to the problem of recursive symlinks. As a remedy, move the include link directories out of the architecture trees into a common location. At the same time, they can now share one directory and one dt-bindings/ link as well. Fixes: 4027494ae6e3 ('ARM: dts: add arm/arm64 include symlinks') Reported-by: Russell King <linux@armlinux.org.uk> Reported-by: Omar Sandoval <osandov@osandov.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-arch <linux-arch@vger.kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> 
We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.

Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.

As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.

Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.

As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.

Fixes: 4027494ae6e3 ('ARM: dts: add arm/arm64 include symlinks')
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arch <linux-arch@vger.kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
kbuild: skip install/check of headers right under uapi directories 2017-05-17T17:17:45+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2017-05-16T05:15:03+00:00 05d8cba4a1e8c7e2d1f91a24a2f3d26852938a04 Since commit 61562f981e92 ("uapi: export all arch specifics directories"), "make INSTALL_HDR_PATH=$root/usr headers_install" deletes standard glibc headers and others in $(root)/usr/include. The cause of the issue is that headers_install now starts descending from arch/$(hdr-arch)/include/uapi with $(root)/usr/include for its destination when installing asm headers. So, headers already there are assumed to be unwanted. When headers_install starts descending from include/uapi with $(root)/usr/include for its destination, it works around the problem by creating an dummy destination $(root)/usr/include/uapi, but this is tricky. To fix the problem in a clean way is to skip headers install/check in include/uapi and arch/$(hdr-arch)/include/uapi because we know there are only sub-directories in uapi directories. A good side effect is the empty destination $(root)/usr/include/uapi will go away. I am also removing the trailing slash in the headers_check target to skip checking in arch/$(hdr-arch)/include/uapi. Fixes: 61562f981e92 ("uapi: export all arch specifics directories") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> 
Since commit 61562f981e92 ("uapi: export all arch specifics
directories"), "make INSTALL_HDR_PATH=$root/usr headers_install"
deletes standard glibc headers and others in $(root)/usr/include.

The cause of the issue is that headers_install now starts descending
from arch/$(hdr-arch)/include/uapi with $(root)/usr/include for its
destination when installing asm headers.  So, headers already there
are assumed to be unwanted.

When headers_install starts descending from include/uapi with
$(root)/usr/include for its destination, it works around the problem
by creating an dummy destination $(root)/usr/include/uapi, but this
is tricky.

To fix the problem in a clean way is to skip headers install/check
in include/uapi and arch/$(hdr-arch)/include/uapi because we know
there are only sub-directories in uapi directories.  A good side
effect is the empty destination $(root)/usr/include/uapi will go
away.

I am also removing the trailing slash in the headers_check target to
skip checking in arch/$(hdr-arch)/include/uapi.

Fixes: 61562f981e92 ("uapi: export all arch specifics directories")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
dtc: check.c fix compile error 2017-05-17T16:12:32+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-05-16T16:08:08+00:00 828d4cdd012c8ffbf76625c3ff164312e8666784 Fix the following compile error found on odroid-xu4: checks.c: In function ‘check_simple_bus_reg’: checks.c:876:41: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t{aka long long unsigned int}’ [-Werror=format=] snprintf(unit_addr, sizeof(unit_addr), "%lx", reg); ^ checks.c:876:41: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t {aka long long unsigned int}’ [-Werror=format=] cc1: all warnings being treated as errors Makefile:304: recipe for target 'checks.o' failed make: *** [checks.o] Error 1 Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> [dwg: Correct new format to be correct in general] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [robh: cherry-picked from upstream dtc commit 2a42b14d0d03] Signed-off-by: Rob Herring <robh@kernel.org> 
Fix the following compile error found on odroid-xu4:

checks.c: In function ‘check_simple_bus_reg’:
checks.c:876:41: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type
‘uint64_t{aka long long unsigned int}’ [-Werror=format=]
  snprintf(unit_addr, sizeof(unit_addr), "%lx", reg);
                                         ^
checks.c:876:41: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type
‘uint64_t {aka long long unsigned int}’ [-Werror=format=]
cc1: all warnings being treated as errors
Makefile:304: recipe for target 'checks.o' failed
make: *** [checks.o] Error 1

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
[dwg: Correct new format to be correct in general]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[robh: cherry-picked from upstream dtc commit 2a42b14d0d03]
Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2017-05-11T03:45:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-05-11T03:45:36+00:00 791a9a666d1afe2603bcb2c6a4852d684e879252 Pull Kbuild UAPI updates from Masahiro Yamada: "Improvement of headers_install by Nicolas Dichtel. It has been long since the introduction of uapi directories, but the de-coupling of exported headers has not been completed. Headers listed in header-y are exported whether they exist in uapi directories or not. His work fixes this inconsistency. All (and only) headers under uapi directories are now exported. The asm-generic wrappers are still exceptions, but this is a big step forward" * tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: arch/include: remove empty Kbuild files uapi: export all arch specifics directories uapi: export all headers under uapi directories smc_diag.h: fix include from userland btrfs_tree.h: fix include from userland uapi: includes linux/types.h before exporting files Makefile.headersinst: remove destination-y option Makefile.headersinst: cleanup input files x86: stop exporting msr-index.h to userland nios2: put setup.h in uapi h8300: put bitsperlong.h in uapi 
Pull Kbuild UAPI updates from Masahiro Yamada:
 "Improvement of headers_install by Nicolas Dichtel.

  It has been long since the introduction of uapi directories, but the
  de-coupling of exported headers has not been completed. Headers listed
  in header-y are exported whether they exist in uapi directories or
  not. His work fixes this inconsistency.

  All (and only) headers under uapi directories are now exported. The
  asm-generic wrappers are still exceptions, but this is a big step
  forward"

* tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  arch/include: remove empty Kbuild files
  uapi: export all arch specifics directories
  uapi: export all headers under uapi directories
  smc_diag.h: fix include from userland
  btrfs_tree.h: fix include from userland
  uapi: includes linux/types.h before exporting files
  Makefile.headersinst: remove destination-y option
  Makefile.headersinst: cleanup input files
  x86: stop exporting msr-index.h to userland
  nios2: put setup.h in uapi
  h8300: put bitsperlong.h in uapi
Merge tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2017-05-11T03:41:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-05-11T03:41:43+00:00 23ea3f62f3f90caaa7b4bf32690c341101228cca Pull misc Kbuild updates from Masahiro Yamada: - clean up builddeb script - use full path for KBUILD_IMAGE to fix rpm-pkg build - fix objdiff tool to ignore debug info * tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: builddeb: fix typo builddeb: Update a few outdated and hardcoded strings deb-pkg: Remove the KBUILD_IMAGE workaround unicore32: Use full path in KBUILD_IMAGE definition sh: Use full path in KBUILD_IMAGE definition arc: Use full path in KBUILD_IMAGE definition arm: Use full path in KBUILD_IMAGE definition arm64: Use full path in KBUILD_IMAGE definition scripts: objdiff: Ignore debug info when comparing 
Pull misc Kbuild updates from Masahiro Yamada:

 - clean up builddeb script

 - use full path for KBUILD_IMAGE to fix rpm-pkg build

 - fix objdiff tool to ignore debug info

* tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  builddeb: fix typo
  builddeb: Update a few outdated and hardcoded strings
  deb-pkg: Remove the KBUILD_IMAGE workaround
  unicore32: Use full path in KBUILD_IMAGE definition
  sh: Use full path in KBUILD_IMAGE definition
  arc: Use full path in KBUILD_IMAGE definition
  arm: Use full path in KBUILD_IMAGE definition
  arm64: Use full path in KBUILD_IMAGE definition
  scripts: objdiff: Ignore debug info when comparing
Merge tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2017-05-11T03:11:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-05-11T03:11:05+00:00 593043d35ddff8ab033546c2a89bb1d4080d03e1 Pull Kbuild updates from Masahiro Yamada: - improve Clang support - clean up various Makefiles - improve build log visibility (objtool, alpha, ia64) - improve compiler flag evaluation for better build performance - fix GCC version-dependent warning - fix genksyms * tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (23 commits) kbuild: dtbinst: remove unnecessary __dtbs_install_prep target ia64: beatify build log for gate.so and gate-syms.o alpha: make short build log available for division routines alpha: merge build rules of division routines alpha: add $(src)/ rather than $(obj)/ to make source file path Makefile: evaluate LDFLAGS_BUILD_ID only once objtool: make it visible in make V=1 output kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS kbuild: Add support to generate LLVM assembly files kbuild: Add better clang cross build support kbuild: drop -Wno-unknown-warning-option from clang options kbuild: fix asm-offset generation to work with clang kbuild: consolidate redundant sed script ASM offset generation frv: Use OFFSET macro in DEF_*REG() kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7 kbuild: Consolidate header generation from ASM offset information kbuild: use -Oz instead of -Os when using clang kbuild, LLVMLinux: Add -Werror to cc-option to support clang Kbuild: make designated_init attribute fatal kbuild: drop unneeded patterns '.*.orig' and '.*.rej' from distclean ... 
Pull Kbuild updates from Masahiro Yamada:

 - improve Clang support

 - clean up various Makefiles

 - improve build log visibility (objtool, alpha, ia64)

 - improve compiler flag evaluation for better build performance

 - fix GCC version-dependent warning

 - fix genksyms

* tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (23 commits)
  kbuild: dtbinst: remove unnecessary __dtbs_install_prep target
  ia64: beatify build log for gate.so and gate-syms.o
  alpha: make short build log available for division routines
  alpha: merge build rules of division routines
  alpha: add $(src)/ rather than $(obj)/ to make source file path
  Makefile: evaluate LDFLAGS_BUILD_ID only once
  objtool: make it visible in make V=1 output
  kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
  kbuild: Add support to generate LLVM assembly files
  kbuild: Add better clang cross build support
  kbuild: drop -Wno-unknown-warning-option from clang options
  kbuild: fix asm-offset generation to work with clang
  kbuild: consolidate redundant sed script ASM offset generation
  frv: Use OFFSET macro in DEF_*REG()
  kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7
  kbuild: Consolidate header generation from ASM offset information
  kbuild: use -Oz instead of -Os when using clang
  kbuild, LLVMLinux: Add -Werror to cc-option to support clang
  Kbuild: make designated_init attribute fatal
  kbuild: drop unneeded patterns '.*.orig' and '.*.rej' from distclean
  ...
uapi: export all arch specifics directories 2017-05-10T15:22:17+00:00 Nicolas Dichtel nicolas.dichtel@6wind.com 2017-03-27T12:20:16+00:00 61562f981e9284ff7dfb2769d89c750986a5f677 This patch removes the need of subdir-y. Now all files/directories under arch/<arch>/include/uapi/ are exported. The only change for userland is the layout of the command 'make headers_install_all': directories asm-<arch> are replaced by arch-<arch>/. Those new directories contains all files/directories of the specified arch. Note that only cris and tile have more directories than only asm: - arch-v[10|32] for cris; - arch for tile. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.

The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.

Note that only cris and tile have more directories than only asm:
 - arch-v[10|32] for cris;
 - arch for tile.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
uapi: export all headers under uapi directories 2017-05-10T15:21:54+00:00 Nicolas Dichtel nicolas.dichtel@6wind.com 2017-03-27T12:20:15+00:00 fcc8487d477a3452a1d0ccbdd4c5e0e1e3cb8bed Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch/<arch>/include/uapi/asm/Kbuild; - arch/<arch>/include/asm/Kbuild. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>