Pull Kconfig updates from Masahiro Yamada:

 - Change 'option defconfig' to the environment variable
   KCONFIG_DEFCONFIG_LIST

 - Refactor tinyconfig without using allnoconfig_y

 - Remove 'option allnoconfig_y' syntax

 - Change 'option modules' to 'modules'

 - Do not use /boot/config-* etc. as base config for cross-compilation

 - Fix a search bug in nconf

 - Various code cleanups

* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kconfig: refactor .gitignore
  kconfig: highlight xconfig 'comment' lines with '***'
  kconfig: highlight gconfig 'comment' lines with '***'
  kconfig: gconf: remove unused code
  kconfig: remove unused PACKAGE definition
  kconfig: nconf: stop endless search loops
  kconfig: split menu.c out of parser.y
  kconfig: nconf: refactor in print_in_middle()
  kconfig: nconf: remove meaningless wattrset() call from show_menu()
  kconfig: nconf: change set_config_filename() to void function
  kconfig: nconf: refactor attributes setup code
  kconfig: nconf: remove unneeded default for menu prompt
  kconfig: nconf: get rid of (void) casts from wattrset() calls
  kconfig: nconf: fix NORMAL attributes
  kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
  kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
  kconfig: change sym_change_count to a boolean flag
  kconfig: nconf: fix core dump when searching in empty menu
  kconfig: lxdialog: A spello fix and a punctuation added
  kconfig: streamline_config.pl: Couple of typo fixes
  ...

Add '/' prefix to clarify that the generated files exist right under
scripts/kconfig/, but not in any sub-directory.

Replace '*conf-cfg' with '[gmnq]conf-cfg' to make it explicit, and
still short enough.

Use '[gmnq]conf' to combine gconf, mconf, nconf, and qconf.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Make include/config/foo/bar.h fake deps files generation simpler.

* delete .h suffix
	those aren't header files, shorten filenames,

* delete tolower()
	Linux filesystems can deal with both upper and lowercase
	filenames very well,

* put everything in 1 directory
	Presumably 'mkdir -p' split is from dark times when filesystems
	handled huge directories badly, disks were round adding to
	seek times.

	x86_64 allmodconfig lists 12364 files in include/config.

	../obj/include/config/
	├── 104_QUAD_8
	├── 60XX_WDT
	├── 64BIT
		...
	├── ZSWAP_DEFAULT_ON
	├── ZSWAP_ZPOOL_DEFAULT
	└── ZSWAP_ZPOOL_DEFAULT_ZBUD

	0 directories, 12364 files

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Mark Kconfig "comment" lines with "*** <commentstring> ***"
so that it is clear that these lines are comments and not some
kconfig item that cannot be modified.

This is helpful in some menus to be able to provide a menu
"sub-heading" for groups of similar config items.

This also makes the comments be presented in a way that is
similar to menuconfig and nconfig.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Mark Kconfig "comment" lines with "*** <commentstring> ***"
so that it is clear that these lines are comments and not some
kconfig item that cannot be modified.

This is helpful in some menus to be able to provide a menu
"sub-heading" for groups of similar config items.

This also makes the comments be presented in a way that is
similar to menuconfig and nconfig.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the unused <config.h> inclusion, and commented out lines.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit 3b9fa0931dd8 ("[PATCH] Kconfig i18n support") added this code,
and then commit ("kconfig: drop localization support") removed the
i18n support entirely.

Remove the left-over.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.

The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.

My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.

This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.

OTOH, this code is now essentially all his work.

Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.

Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Compile menu.c as an independent compilation unit.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This helper is the same as the sample code in the NCURSES HOWTO [1],
but it is over-engineering to be used for nconf.

I do not see any good reason to use the 'float' type just for the
division by 2.

All the call-sites pass a non-NULL pointer to the first argument,
so 'if (win == NULL) win = stdscr;' is dead code.

'if (startx != 0) x = startx;' is dead code because 'x' will be
overridden some lines below, by 'x = startx + (int)temp;'.

All the call-sites pass a non-zero value to the second argument,
so 'if (starty != 0)' is always true.

getyx(win, y, x) is also dead-code because both 'y' and 'x' are
overridden.

All the call-sites pass 0 to the third parameter, so 'startx' can
be removed.

All the call-sites pass a non-zero value to the fourth parameter,
so 'if (width == 0) width = 80;' is dead code.

The window will be refreshed later, so there is no need to call
refresh() in this function.

Change the type of the last parameter from 'chtype' to 'int' to be
aligned with the prototype, 'int wattrset(WINDOW *win, int attrs);'

I also slightly cleaned up the indentation style.

[1]: https://tldp.org/HOWTO/NCURSES-Programming-HOWTO/color.html

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>