The last_migrate_reason field uses -1 as a sentinel value to mean "no migration has happened". Replace the four bare -1 occurrences by adding a proper MR_NEVER member to enum migrate_reason, defining a corresponding "never_migrated" string in the MIGRATE_REASON trace macro, and updating the GDB page_owner script to use MR_NEVER instead of the hardcoded -1 so that lx-dump-page-owner does not incorrectly report unmigrated pages as migrated. No functional change. Link: https://lore.kernel.org/20260714015117.78351-3-ye.liu@linux.dev Signed-off-by: Ye Liu <ye.liu@linux.dev> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lorenzo Stoakes <ljs@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: David Hildenbrand (Arm) <david@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull NOHZ updates from Thomas Gleixner: - Fix a long standing TOCTOU in get_cpu_sleep_time_us() - Make the CPU offline NOHZ handling more robust by disabling NOHZ on the outgoing CPU early instead of creating unneeded state which needs to be undone. - Unify idle CPU time accounting instead of having two different accounting mechanisms. These two different mechanisms are not really independent, but the different properties can in the worst case cause that gloabl idle time can be observed going backwards. - Consolidate the idle/iowait time retrieval interfaces instead of converting back and forth between them. - Make idle interrupt time accounting more robust. The original code assumes that interrupt time accouting is enabled and therefore stops elapsing idle time while an interrupt is handled in NOHZ dyntick state. That assumption is not correct as interrupt time accounting can be disabled at compile and runtime. - Fix an accounting error between dyntick idle time and dyntick idle steal time. The stolen time is not accounted and therefore idle time becomes inaccurate. The stolen time is now accounted after the fact as there is no way to predict the steal time upfront. * tag 'timers-nohz-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: sched/cputime: Handle dyntick-idle steal time correctly sched/cputime: Handle idle irqtime gracefully sched/cputime: Provide get_cpu_[idle|iowait]_time_us() off-case tick/sched: Consolidate idle time fetching APIs tick/sched: Account tickless idle cputime only when tick is stopped tick/sched: Remove unused fields tick/sched: Move dyntick-idle cputime accounting to cputime code tick/sched: Remove nohz disabled special case in cputime fetch tick/sched: Unify idle cputime accounting s390/time: Prepare to stop elapsing in dynticks-idle powerpc/time: Prepare to stop elapsing in dynticks-idle sched/cputime: Correctly support generic vtime idle time sched/cputime: Remove superfluous and error prone kcpustat_field() parameter sched/idle: Handle offlining first in idle loop tick/sched: Fix TOCTOU in nohz idle time fetch
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
Remove fields after the dyntick-idle cputime migration to scheduler code. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Link: https://patch.msgid.link/20260508131647.43868-11-frederic@kernel.org
The chip name column in the /proc/interrupt output is 8 characters and right aligned, which causes visual clutter due to the fixed length and the alignment. Many interrupt chips, e.g. PCI/MSI[X] have way longer names. Update the length when a chip is assigned to an interrupt and utilize this information for the output. Align it left so all chip names start at the begin of the column. Update the GDB script as well and disentangle the header maze so it actually works with all .config combinations. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com> Link: https://patch.msgid.link/20260517194932.085786035@kernel.org
Quite some architectures have four character wide acronyms for architecture specific interrupts like IPI, NMI, etc. The default precision of printing the Linux device interrupt numbers is three, which causes quite some code to play games with adding or omitting space after the acronym and the colon in order to keep the per CPU numbers properly aligned. Increase the default number precision to four in the core code and get rid of the space games all over the place. At the same time align all architecture specific descriptor texts left so that they show up in the same column as the interrupt chip names, which makes the output more uniform accross architectures. Fix up the GDB script to this new scheme as well. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
... to avoid function calls in the core code to retrieve the maximum number of interrupts. Rename it to 'total_nr_irqs' as 'nr_irqs' is too generic and fix up the 'nr_irqs' reference in the related GDB script as well. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com> Reviewed-by: Radu Rendec <radu@rendec.net> Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com> Link: https://patch.msgid.link/20260517194931.522168332@kernel.org
x86 changed the interrupt statistics from a struct with individual members to an counter array. It also provides a corresponding info array with the strings for prefix and description and an indicator to skip the entry. Update the already out of sync GDB script to use the counter and the info array, which keeps the GDB script in sync automatically. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20260517194931.442613033@kernel.org
The commit 5ba6bc27b1f9 ("slab: decouple pointer to barn from
kmem_cache_node") reorganized the struct kmem_cache to factor out the
per-node fields to the new struct kmem_cache_per_node_ptrs. This causes
the gdb scripts for lx-slabinfo and lx-slabtrace fail as they still
reference the old structure.
Adjust the gdb scripts to match the current state of struct kmem_cache.
Link: https://lore.kernel.org/20260427142448.666117-3-illia@yshyn.com
Fixes: 5ba6bc27b1f9 ("slab: decouple pointer to barn from kmem_cache_node")
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Hao Li <hao.li@linux.dev>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Seongjun Hong <hsj0512@snu.ac.kr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The symbols phys_base, _text, and _end, used in x86_page_ops are either
defined in assembly or implicitly by the linker. Thus, they lack type
information and cause a conversion error after gdb.parse_and_eval.
Explicitly cast these expressions to unsigned long.
Link: https://lore.kernel.org/20260427142448.666117-2-illia@yshyn.com
Fixes: 55f8b4518d14 ("scripts/gdb: implement x86_page_ops in mm.py")
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: Hao Li <hao.li@linux.dev>
Cc: Harry Yoo <harry@kernel.org>
Cc: Seongjun Hong <hsj0512@snu.ac.kr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>