The ceiling-division idiom `(n + d - 1) / d` only produces the
correct result when `n` is non-negative.

For example, if n = -1000 (exactly -1us), the old code computed (-1000
+ 999) / 1000 == 0 instead of -1.

For negative n, truncating division already rounds towards positive
infinity, so no bias is needed in that case.

Fixes: fae0cdc12340 ("rust: time: Introduce Delta type")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260713225235.3243480-1-tomo@flapping.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

These macros are used like expressions, so they should not emit a
semicolon. This is being turned into a hard error in a future release of
Rust.

    error: trailing semicolon in macro used in expression position
      --> drivers/gpu/nova-core/firmware/fsp.rs:79:34
       |
    79 |                 .inspect_err(|_| dev_err!(dev, "FMC firmware missing '{}' section\n", name))
       |                                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       |
       = warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
       = note: for more information, see issue #79813 <https://github.com/rust-lang/rust/issues/79813>
       = note: this error originates in the macro `dev_err` (in Nightly builds, run with -Z macro-backtrace for more info)

[ I was doubly surprised since upstream made it a deny-by-default lint
  a year ago for Rust 1.91.0, and yet we didn't see it; plus I hadn't
  seen this in my CI even yesterday.

  It turns out this just landed into today's nightly (nightly-2026-07-16,
  using upstream commit d0babd8b6):

    Link: https://github.com/rust-lang/rust/pull/159222

  which says:

    "The `semicolon_in_expressions_from_macros` lint previously
     suppressed warnings about non-local macros. This masks
     a lint that will subsequently become a hard error."

  So that explains it. And this is the PR that will make it a hard error
  at some point in the future:

    Link: https://github.com/rust-lang/rust/pull/159218

  Thus starting with Rust 1.99.0 (expected 2026-10-01), we will be
  seeing the deny-by-default lint above, so clean it up already.

    - Miguel ]

Cc: stable@vger.kernel.org # Needed in 6.18.y and later.
Link: https://github.com/rust-lang/rust/issues/79813
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://github.com/rust-lang/rust/pull/159218
Link: https://github.com/rust-lang/rust/pull/159222
Link: https://patch.msgid.link/20260716-device-trail-semicolon-v1-1-f48e9dcfae15@google.com
[ Fixed typo. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

Pull rust addendum from Miguel Ojeda:
 "A second, tiny pull request later in the merge window with a small
  patch to simplify cross-tree development:

  'kernel' crate:

    - 'prelude' module: add 'zerocopy{,_derive}::IntoBytes'.

  This will simplify using 'zerocopy' in several trees next cycle"

* tag 'rust-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
  rust: prelude: add `zerocopy{,_derive}::IntoBytes`

Pull rust fixes from Miguel Ojeda:
 "Toolchain and infrastructure:

   - Work around a 'rustc' bug by setting the 'frame-pointer' LLVM
     module flag under 'CONFIG_FRAME_POINTER'.

     The upcoming Rust 1.98.0 is fixed.

   - Doctests: fix incorrect replacement pattern.

  'kernel' crate:

   - Mark 'Debug' impl as '#[inline]'"

* tag 'rust-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
  rust: Kbuild: set frame-pointer llvm module flag for CONFIG_FRAME_POINTER
  rust: doctest: fix incorrect pattern in replacement
  rust: bitfield: mark `Debug` impl as `#[inline]`

Pull misc driver updates from Greg KH:
 "Here is the big set of char, misc, iio, fpga, and other small driver
  subsystems changes for 7.2-rc1.

  Lots of little stuff in here, the majority being of course the IIO
  driver updates, as a list they are:

   - IIO driver updates and additions

   - GPIB driver bugfixes and cleanups

   - Android binder driver updates (rust and C version)

   - counter driver updates

   - MHI driver updates

   - mei driver updates

   - w1 driver updates

   - interconnect driver updates

   - Comedi driver fixes and updates

   - some obsolete char drivers removed (applicom and dtlk)

   - hwtracing driver updates

   - other tiny driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
  w1: ds2482: Use named initializers for arrays of i2c_device_data
  firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
  firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
  coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
  iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
  iio: chemical: scd30: Replace manual locking with RAII locking
  iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
  iio: dac: ad5686: create bus ops struct
  iio: dac: ad5686: cleanup doc header of local structs
  iio: dac: ad5686: add control_sync() for single-channel devices
  iio: dac: ad5686: add helpers to handle powerdown masks
  iio: dac: ad5686: add of_match table to the spi driver
  iio: dac: ad5686: drop enum id
  iio: dac: ad5686: remove redundant register definition
  iio: dac: ad5686: refactor include headers
  iio: adc: ad4080: fix AD4880 chip ID
  iio: light: veml3328: add support for new device
  dt-bindings: iio: light: veml6030: add veml3328
  fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
  fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
  ...

Pull MM updates from Andrew Morton:

 - "selftests/mm: clean up build output and verbosity" (Li Wang)

   Remove some noise from the MM selftests build

 - "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)

   Speed up the freeing of a batch of 0-order pages by first scanning
   them for coalescing opportunities. This is applicable to vfree() and
   to the releasing of frozen pages

 - "mm/damon: introduce DAMOS failed region quota charge ratio"
   (SeongJae Park)

   Address a DAMOS usability issue: The DAMOS quota often exhausts
   prematurely because it charges for all memory attempted, causing slow
   and inconsistent performance when actions fail on unreclaimable
   memory.

   To fix this, a new feature lets users set a smaller, flexible quota
   charge ratio (via a numerator and denominator) for failed regions.
   Since failed actions cause less overhead, reducing their quota cost
   ensures more predictable and efficient DAMOS processing

 - "selftests/cgroup: improve zswap tests robustness and support large
   page sizes" (Li Wang)

   Fix various spurious failures and improves the overall robustness of
   the cgroup zswap selftests

 - "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)

   Fix an issue in the mlock selftests on arm32

 - "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)

   Some maintenance work in the huge_memory code

 - "treewide: fixup gfp_t printks" (Brendan Jackman)

   Use the special vprintf() gfp_t conversion in various places

 - "mm: Fix vmemmap optimization accounting and initialization" (Muchun
   Song)

   Fix several bugs in the vmemmap optimization, mainly around incorrect
   page accounting and memmap initialization in the DAX and memory
   hotplug paths. It also fixes pageblock migratetype initialization and
   struct page initialization for ZONE_DEVICE compound pages

 - "mm/damon: repost non-hotfix reviewed patches in damon/next tree"

   A sprinkle of unrelated minor bugfixes for DAMON

 - "mm: remove page_mapped()" (David Hildenbrand)

   Remove this function from the tree, replacing it with folio_mapped()

 - "mm/damon: let DAMON be paused and resumed" (SeongJae Park)

   Allow DAMON to be paused and resumed without losing its current state

 - "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
   Usama Anjum)

   Simplify and speed up kasan by removing its ineffective tagging of
   stacks and page tables

 - "mm/damon/reclaim,lru_sort: monitor all system rams by default"
   (SeongJae Park)

   Simplify deployment on diverse hardware like NUMA systems by updating
   DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
   physical address range covering all System RAM areas by default,
   replacing the overly restrictive behavior that only targeted the
   single largest memory block to save on negligible overhead

 - "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
   Park)

   Update some DAMON docs

 - "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)

   Switch zone->lock handling over to using the guard() mechanisms

 - "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)

   Fix a flaw where the mmap_miss counter over-credited page cache hits
   during fault-arounds and page-fault retries. This results in
   significant reduction of redundant synchronous mmap readahead I/O,
   drastically cutting down execution time and gigabytes read for sparse
   random or strided memory access workloads

 - "selftests/cgroup: Fix false positive failures in test_percpu_basic"
   (Li Wang)

   Fix a couple of false-positives in the cgroup kmem selftests

 - "mm/damon/reclaim: support monitoring intervals auto-tuning"
   (SeongJae Park)

   Add a new parameter to DAMON permitting DAMON_RECLAIM to
   automatically tune DAMON's sampling and aggregation intervals

 - "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)

   Change DAMON_STAT to provide the pid of its kdamond

 - "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)

   Remove large amounts of duplicated backtraces from the verbose-mode
   kmemleak output

 - "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
   Hildenbrand)

   Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
   removing it entirely in a later series

 - "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)

   Prevent users from passing a non-power-of-2 value of `addr_unit', as
   this later results in undesirable behavior

 - "mm: document read_pages and simplify usage" (Frederick Mayle)

 - "tools/mm/page-types: Fix misc bugs" (Ye Liu)

   Fix three issues in tools/mm/page-types.c

 - "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)

   Implement several cleanups in the page allocator and related code

 - "mm, swap: swap table phase IV: unify allocation" (Kairui Song)

   Unify the allocation and charging of anon and shmem swap in folios,
   provides better synchronization, consolidates the metadata
   management, hence dropping the static array and map, and improves
   performance

 - "mm/damon: introduce data attributes monitoring" (SeongJae Park(

   Extend DAMON to monitor general data attributes other than accesses

 - "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)

   Implement the TODO in vrealloc() to unmap and free unused pages when
   shrinking across a page boundary

 - "mm/damon: documentation and comment fixes" (niecheng)

 - "remove mmap_action success, error hooks" (Lorenzo Stoakes)

   Eliminate custom hooks from mmap_action by removing the problematic
   success_hook which allowed drivers to improperly access uninitialized
   VMAs. It replaces the error_hook with a simple error-code field and
   updates the memory char driver accordingly

 - "mm/damon: minor improvements for code readability and tests"
   (SeongJae Park)

 - "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
   Shcherba)

 - "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
   Rapoport)

 - "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
   others)

   Clean up and slightly improves MGLRU's reclaim loop and dirty
   writeback handling. Large performance improvements are measured

 - "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
   Baghdasaryan)

   Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
   to reduce contention on central mmap_lock

 - "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
   (Ran Xiaokai)

   Some cleanup work in the THP code

 - "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)

   Fix a few build glitches in the memfd selftest code.

 - "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
   Butt)

   Resolve a 68% performance regression caused by NUMA-node cache
   thrashing around struct obj_stock_pcp by shrinking its existing
   fields and expanding it into a multi-slot array that caches up to
   five obj_cgroup pointers per CPU, allowing per-node variants of the
   same memcg to coexist within a single 64-byte cache line.

 - "zram: writeback fixes" (Sergey Senozhatsky)

   address a couple of unrelated zram writeback issues

 - "mm: switch THP shrinker to list_lru" (Johannes Weiner)

   Resolve NUMA-awareness issues and streamlines callsite interaction by
   refactoring and extending the list_lru API to completely replace the
   complex, open-coded deferred split queue for Transparent Huge Pages

 - "mm: improve large folio readahead for exec memory" (Usama Arif)

   Improve large-folio readahead on systems like 64K-page arm64 by
   preventing the mmap_miss check from permanently disabling
   target-oriented VM_EXEC readahead, and by generalizing the
   force_thp_readahead gate to support mappings with any usefully large
   maximum folio order under the cache cap.

 - "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)

   Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
   were flagged by Sashiko review of proposed new material

 - "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
   vmemmap_check_pmd()" (Muchun Song)

   Provide generic versions of these two functions so the four
   arch-specific implementations can be removed.

 - "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
   device" (Youngjun Park)

   Address a uswsusp-vs-swapoff race and reduces the swap device
   reference taking/releasing frequency.

 - "mm/hmm: A fix and a selftest" (Dev Jain)

* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
  selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
  fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
  lib/test_hmm: check alloc_page_vma() return value and handle OOM
  mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
  mm/swap: remove redundant swap device reference in alloc/free
  mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
  mm/filemap: use folio_next_index() for start
  vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
  sparc/mm: drop vmemmap_check_pmd helper and use generic code
  loongarch/mm: drop vmemmap_check_pmd helper and use generic code
  riscv/mm: drop vmemmap_pmd helpers and use generic code
  arm64/mm: drop vmemmap_pmd helpers and use generic code
  mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
  rust: page: mark Page::nid as inline
  userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
  userfaultfd: gate must_wait writability check on pte_present()
  mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
  fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
  fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
  fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
  ...

Pull modules updates from Sami Tolvanen:

 - Add a missing return value check for module_extend_max_pages() to
   prevent a kernel oops on memory allocation failure.

 - Force sh_addr to 0 for architecture-specific module sections on arm,
   arm64, m68k, and riscv. This prevents non-zero section addresses when
   linking modules with ld.bfd -r, which may cause tools to misbehave
   and result in worse compressibility.

 - Replace pr_warn! with pr_warn_once! for set_param null pointer
   warnings in Rust abstractions, now that the _once variant is
   available.

* tag 'modules-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
  rust: module_param: add missing newline to pr_warn_once
  module: decompress: check return value of module_extend_max_pages()
  rust: module_param: use `pr_warn_once!` for null pointer warning
  module, riscv: force sh_addr=0 for arch-specific sections
  module, m68k: force sh_addr=0 for arch-specific sections
  module, arm64: force sh_addr=0 for arch-specific sections
  module, arm: force sh_addr=0 for arch-specific sections

Pull drm updates from Dave Airlie:
 "Highlights:
   - xe: add initial CRI platform support
   - amdgpu: initial HDMI 2.1 FRL support
   - rust: add some new type concepts for device lifetimes
   - scheduler: moves to a fair algorithm and lots of cleanups

  But it's mostly the usual mountain of changes across the board.

  core:
   - add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
   - change signature of drm_connector_attach_hdr_output_metadata_property
   - dedup counter and timestamp retrieval in vblank code
   - parse AMD VSDB v3 in CTA extension blocks
   - add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
   - don't call drop master on file close if not master
   - use drm_printf_indent in atomic / bridge
   - fix 32b format descriptions
   - docs: fix toctree
   - hdmi: add common TMDS character rates
   - fix drm_syncobj_find_fence leak

  rust:
   - introduce Higher-Ranked lifetime types
   - replace drvdata with scoped registration data
   - add GPUVM immediate mode abstraction for rust GPU drivers
   - introduce DeviceContext type state for drm::Device

  bridge:
   - clarify drm_bridge_get/put
   - create drm_get_bridge_by_endpoint and use it
   - analogix_dp: add panel probing
   - ite-it6211 - use drm audio hdmi helpers

  buddy:
   - add lockdep annotations

  dp:
   - add PR and VRR updates
   - mst: fix buffer overflows
   - add Adaptive Sync SDP decoding support
   - fix OOB reads in dp-mst

  ttm:
   - bump fpfn/lpfn to 64-bit

  scheduler:
   - change default to fair scheduler
   - map runqueue 1:1 with scheduler

  dma-buf:
   - port selftests to kunit
   - convert dma-buf system/heap allocators to module
   - add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig

  udmabuf:
   - revert hugetlb support
   - fix error with CONFIG_DMA_API_DEBUG

  dma-fence:
   - fix tracepoints lifetime
   - remove unused signal on any support

  ras:
   - add clear error counter netlink command to drm ras

  gpusvm:
   - reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
   - use IOVA allocations

  pagemap:
   - use IOVA allocations

  panels:
   - update to use ref counts
   - add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
   - add support for waveshare panels
   - CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
   - IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
   - AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
   - Surface Pro 12 Panel

  xe:
   - add CRI PCI-IDs
   - debugfs add multi-lrc info
   - engine init cleanup
   - PF fair scheduling auto provisioning
   - system controller support for CRI/Xe3p
   - PXP state machine fixes
   - Reset/wedge/unload corner case fixes
   - Wedge path memory allocation fixes
   - PAT type cleanups
   - Reject unsafe PAT for CPU cached memory
   - OA improvements for CRI device memory
   - kernel doc syntax in xe headers
   - xe_drm.h documentation fixes
   - include guard cleanups
   - VF CCS memory pool
   - i915/xe step unification
   - Xe3p GT tuning fixes
   - forcewake cleanup in GT and GuC
   - admin-only PF mode
   - enable hwmon energy attributes for CRI
   - enable GT_MI_USER_INTERRUPT
   - refactor emit functions
   - oa workarounds
   - multi_queue: allow QUEUE_TIMESTAMP register
   - convert stolen memory to ttm range manager
   - use xe2 style blitter as a feature flag
   - make drm_driver const
   - add/use IRQ page to HW engine definition
   - fix oops when display disabled

  i915:
   - enable PIPEDMC_ERROR interrupt
   - more common display code refactoring
   - restructure DP/HDMI sink format handling
   - eliminate FB usage from lowlevel pinning code
   - panel replay bw optimization
   - integrate sharpness filter into the scaler
   - new fb_pin abstraction for xe/i915 fb transparent handling
   - skip inactive MST connectors on HDCP
   - start switching to display specific registers
   - use polling when irq unavailable
   - Adaptive-sync SDP prep

  amdgpu:
   - use drm_display_info for AMD VSDB data
   - Initial HDMI 2.1 FRL support
   - Initial DCN 4.2.1 support
   - GART fixes for non-4k pages
   - GC 11.5.6/SDMA 6.4.0/and other new IPs
   - GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
   - Finish support for using multiple SDMA queues for TTM operations
   - SWSMU updates
   - GC 12.1 updates
   - SMU 15.0.8 updates
   - DCN 4.2 updates
   - DC type conversion fixes
   - Enable DC power module
   - Replay/PSR updates
   - SMU 13.x updates
   - Compute queue quantum MQD updates
   - ASPM fix
   - Align VKMS with common implementation
   - DC analog support fixes
   - UVD 3 fixes
   - TCC harvesting fixes for SI
   - GC 11 APU module reload fix
   - NBIO 6.3.2 support
   - IH 7.1 updates
   - DC cursor fixes
   - VCN/JPEG user fence fixes
   - DC support for connectors without DDC
   - Prefer ROM BAR for default VGA device
   - DC bandwidth fixes
   - Add PTL support for profiler
   - Introduce dc_plane_cm and migrate surface update color path
   - Add FRL registers for HDMI 2.1
   - Restructure VM state machine
   - Auxless ALPM support
   - GEM_OP locking/warning fixes
   - switch to system_dfl_wq

  amdkfd:
   - GPUVM TLB flush fix
   - Hotplug fix
   - Boundary check fixes
   - SVM fixes
   - CRIU fixes
   - add profiler API
   - MES 12.1 updates

  msm:
   - core:
     - fix shrinker documentation
     - IFPC enabled for gen8
     - PERFCNTR_CONFIG ioctl support
   - GPU:
     - reworked UBWC handling
     - a810 support
   - MDSS:
     - add support for Milos platform
     - reworked UBWC handling
   - DisplayPort:
     - reworked HPD handling as prep for MST
   - DPU:
     - Milos platform support
     - reworked UBWC handling
   - DSI:
     - Milos platform support

  nova:
   - Hopper/Blackwell enablement (GH100/GB100/GB202)
     - FSP support
     - 32-bit firmware support
     - HAL functions
   - refactor GSP boot/unload
   - GA100 support
   - VBIOS hardening/refactoring
   - Adopt higher order lifetime types

  tyr:
   - define register blocks
   - add shmem backed GEM objects
   - adopt higher order lifetime types
   - move clock cleanup into Drop

  radeon:
   - Hawaii SMU fixes
   - CS parser fix
   - use struct drm_edid instead of edid

  amdxdna:
   - export per-client BO memory via fdinfo
   - AIE4 device support
   - support medium/lower power modes
   - expandable device heap support
   - revert read-only user-pointer BO mappings

  ivpu:
   - support frequency limiting

  panthor:
   - enable GEM shrinker support
   - add eviction and reclaim info to fdinfo

  v3d:
   - enable runtime PM

  mgag200:
   - support XRGB1555 + C8

  ast:
   - support XRGB1555 + C8
   - use constants for lots of registers
   - fix register handling

  imagination:
   - fence handling refactoring

  nouveau:
   - fix sched double call
   - expose VBIOS on GSP-RM systems
   - add GA100 support

  virtio:
   - add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
   - add deferred mapping support

  gud:
   - add RCade Display Adapter

  hibmc:
   - fix no connectors usage

  mediatek:
   - hdmi: convert error handling
   - simplify mtk_crtc allocation

  exynos:
   - move fbdev emulation to drm client buffers
   - use drm format helpers for geometry/size
   - adopt core DMA tracking
   - fix framebuffer offset handling

  renesas:
   - add RZ/T2H SOC support

  versilicon:
   - add cursor plane support

  tegra:
   - use drm client for framebuffer"

* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
  dma-buf: move system_cc_shared heap under separate Kconfig
  accel/amdxdna: Clear sva pointer after unbind
  agp/amd64: Fix broken error propagation in agp_amd64_probe()
  accel/amdxdna: Require carveout when PASID and force_iova are disabled
  drm/amdkfd: always resume_all after suspend_all
  drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
  drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
  drm/amd/pm: Use strscpy in profile mode parsing
  drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
  drm/amdkfd: fix sysfs topology prop length on buffer truncation
  drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
  drm/amd/pm: bound OD parameter parsing to stack array size
  drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
  drm/amdkfd: Unwind debug trap enable on copy_to_user failure
  drm/amdgpu: validate the mes firmware version for gfx12.1
  drm/amdgpu: validate the mes firmware version for gfx12
  drm/amdgpu: compare MES firmware version ucode for gfx11
  drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
  drm/amdgpu: restart the CS if some parts of the VM are still invalidated
  drm/amd/display: use unsigned types for local pipe and REG_GET counters
  ...

A `Debug` impl is for debugging and is normally not used, and therefore
should ideally not be code-generated unless used. However, Rust has no way
of knowing if a dependent crate is going to use the trait impl or not, so
unless it is marked as `#[inline]`, it will be code-generated in the
defining crate (as it is not generic).

Mark the impl generated by bitfield macro `#[inline]`, so they do not stay
in the binary unless used.

This reduces nova-core.o .text by 17% (from 151922 bytes to 125676 bytes).

Signed-off-by: Gary Guo <gary@garyguo.net>
Fixes: b7b8b4ccdad4 ("rust: extract `bitfield!` macro from `register!`")
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260611190555.2298991-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

In order to easily use `IntoBytes`, add it to the prelude.

This adds both the trait (`zerocopy::IntoBytes`) as well as the derive
macro (`zerocopy_derive::IntoBytes`).

[ This patch will simplify using the feature in several trees next cycle.

  Gary writes:

    This is wanted because I want to convert the upcoming I/O projection
    series to use `zerocopy` traits rather than keep using transmute
    module.

    It is most helpful for derives in doc tests; I do not want to
    explicitly use `#[derive(zerocopy_derive::IntoBytes)]` in the
    doc tests.

  For reference, the upcoming I/O projection series is at:

    https://lore.kernel.org/rust-for-linux/20260611-io_projection-v4-0-1f7224b02dcb@garyguo.net/

      - Miguel ]

Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260611134802.2052296-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>