David writes:
  "Networking

   1) RXRPC receive path fixes from David Howells.

   2) Re-export __skb_recv_udp(), from Jiri Kosina.

   3) Fix refcounting in u32 classificer, from Al Viro.

   4) Userspace netlink ABI fixes from Eugene Syromiatnikov.

   5) Don't double iounmap on rmmod in ena driver, from Arthur
      Kiyanovski.

   6) Fix devlink string attribute handling, we must pull a copy into a
      kernel buffer if the lifetime extends past the netlink request.
      From Moshe Shemesh.

   7) Fix hangs in RDS, from Ka-Cheong Poon.

   8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.

   9) Clear RX irq correctly in socionext, from Ilias Apalodimas.

   10) bcm_sf2 fixes from Florian Fainelli."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net: dsa: bcm_sf2: Call setup during switch resume
  net: dsa: bcm_sf2: Fix unbind ordering
  net: phy: sfp: remove sfp_mutex's definition
  r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
  net: socionext: clear rx irq correctly
  net/mlx4_core: Fix warnings during boot on driverinit param set failures
  tipc: eliminate possible recursive locking detected by LOCKDEP
  selftests: udpgso_bench.sh explicitly requires bash
  selftests: rtnetlink.sh explicitly requires bash.
  qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
  tipc: queue socket protocol error messages into socket receive buffer
  tipc: set link tolerance correctly in broadcast link
  net: ipv4: don't let PMTU updates increase route MTU
  net: ipv4: update fnhe_pmtu when first hop's MTU changes
  net/ipv6: stop leaking percpu memory in fib6 info
  rds: RDS (tcp) hangs on sendto() to unresponding address
  net: make skb_partial_csum_set() more robust against overflows
  devlink: Add helper function for safely copy string param
  devlink: Fix param cmode driverinit for string type
  devlink: Fix param set handling for string type
  ...

When booting kernel with LOCKDEP option, below warning info was found:

WARNING: possible recursive locking detected
4.19.0-rc7+ #14 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850

but task is already holding lock:
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&list->lock)->rlock#4);
  lock(&(&list->lock)->rlock#4);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

2 locks held by swapper/0/1:
 #0: 00000000f7539d34 (pernet_ops_rwsem){+.+.}, at:
register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051
 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
spin_lock_bh include/linux/spinlock.h:334 [inline]
 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849

stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1af/0x295 lib/dump_stack.c:113
 print_deadlock_bug kernel/locking/lockdep.c:1759 [inline]
 check_deadlock kernel/locking/lockdep.c:1803 [inline]
 validate_chain kernel/locking/lockdep.c:2399 [inline]
 __lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411
 lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900
 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
 _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
 spin_lock_bh include/linux/spinlock.h:334 [inline]
 tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850
 tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526
 tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521
 tipc_init_net+0x472/0x610 net/tipc/core.c:82
 ops_init+0xf7/0x520 net/core/net_namespace.c:129
 __register_pernet_operations net/core/net_namespace.c:940 [inline]
 register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011
 register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052
 tipc_init+0x83/0x104 net/tipc/core.c:140
 do_one_initcall+0x109/0x70a init/main.c:885
 do_initcall_level init/main.c:953 [inline]
 do_initcalls init/main.c:961 [inline]
 do_basic_setup init/main.c:979 [inline]
 kernel_init_freeable+0x4bd/0x57f init/main.c:1144
 kernel_init+0x13/0x180 init/main.c:1063
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413

The reason why the noise above was complained by LOCKDEP is because we
nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset
function. In fact it's unnecessary to move skb buffer from l->wakeupq
queue to l->inputq queue while holding the two locks at the same time.
Instead, we can move skb buffers in l->wakeupq queue to a temporary
list first and then move the buffers of the temporary list to l->inputq
queue, which is also safe for us.

Fixes: 3f32d0be6c16 ("tipc: lock wakeup & inputq at tipc_link_reset()")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

Kees writes:
  "Fix open-coded multiplication arguments to allocators

   - Fixes several new open-coded multiplications added in the 4.19
     merge window."

* tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Replace more open-coded allocation size multiplications

In tipc_sk_filter_rcv(), when we detect protocol messages with error we
call tipc_sk_conn_proto_rcv() and let it reset the connection and notify
the socket by calling sk->sk_state_change().

However, tipc_sk_filter_rcv() may have been called from the function
tipc_backlog_rcv(), in which case the socket lock is held and the socket
already awake. This means that the sk_state_change() call is ignored and
the error notification lost. Now the receive queue will remain empty and
the socket sleeps forever.

In this commit, we convert the protocol message into a connection abort
message and enqueue it into the socket's receive queue. By this addition
to the above state change we cover all conditions.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the patch referred to below we added link tolerance as an additional
criteria for declaring broadcast transmission "stale" and resetting the
affected links.

However, the 'tolerance' field of the broadcast link is never set, and
remains at zero. This renders the whole commit without the intended
improving effect, but luckily also with no negative effect.

In this commit we add the missing initialization.

Fixes: a4dc70d46cf1 ("tipc: extend link reset criteria for stale packet retransmission")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is
received, we must clamp its value. However, we can receive a PMTU
exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an
increase in PMTU.

To fix this, take the smallest of the old MTU and ip_rt_min_pmtu.

Before this patch, in case of an update, the exception's MTU would
always change. Now, an exception can have only its lock flag updated,
but not the MTU, so we need to add a check on locking to the following
"is this exception getting updated, or close to expiring?" test.

Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.

As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
 - if the local MTU is now lower than the PMTU, that PMTU is now
   incorrect
 - if the local MTU was the lowest value in the path, and is increased,
   we might discover a higher PMTU

Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those
cases.

If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.

To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.

Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fib6_info_alloc() function allocates percpu memory to hold per CPU
pointers to rt6_info, but this memory is never freed. Fix it.

Fixes: a64efe142f5e ("net/ipv6: introduce fib6_info struct and helpers")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Fix packet reception code

Here are a set of patches that prepares for and fix problems in rxrpc's
package reception code.  There serious problems are:

 (A) There's a window between binding the socket and setting the data_ready
     hook in which packets can find their way into the UDP socket's receive
     queues.

 (B) The skb_recv_udp() will return an error (and clear the error state) if
     there was an error on the Tx side.  rxrpc doesn't handle this.

 (C) The rxrpc data_ready handler doesn't fully drain the UDP receive
     queue.

 (D) The rxrpc data_ready handler assumes it is called in a non-reentrant
 state.

The second patch fixes (A) - (C); the third patch renders (B) and (C)
non-issues by using the recap_rcv hook instead of data_ready - and the
final patch fixes (D).  That last is the most complex.

The preparatory patches are:

 (1) Fix some places that are doing things in the wrong net namespace.

 (2) Stop taking the rcu read lock as it's held by the IP input routine in
     the call chain.

 (3) Only end the Tx phase if *we* rotated the final packet out of the Tx
     buffer.

 (4) Don't assume that the call state won't change after dropping the
     call_state lock.

 (5) Only take receive window and MTU suze parameters from an ACK packet if
     it's the latest ACK packet.

 (6) Record connection-level abort information correctly.

 (7) Fix a trace line.

And then there are three main patches - note that these are mixed in with
the preparatory patches somewhat:

 (1) Fix the setup window (A), skb_recv_udp() error check (B) and packet
     drainage (C).

 (2) Switch to using the encap_rcv instead of data_ready to cut out the
     effects of the UDP read queues and get the packets delivered directly.

 (3) Add more locking into the various packet input paths to defend against
     re-entrance (D).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

In rds_send_mprds_hash(), if the calculated hash value is non-zero and
the MPRDS connections are not yet up, it will wait.  But it should not
wait if the send is non-blocking.  In this case, it should just use the
base c_path for sending the message.

Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>