drivers/net/can/pch_can.c
  ae64438be192 ("can: dev: fix skb drop check")
  1dd1b521be85 ("can: remove obsolete PCH CAN driver")
https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When invoking function cfg80211_calculate_bitrate_eht about
(320 MHz, EHT-MCS 13, EHT-NSS 2, EHT-GI 0), which means the
parameters as flags: 0x80, bw: 7, mcs: 13, eht_gi: 0, nss: 2,
this formula (result * rate->nss) will overflow and causes
the returned bitrate to be 3959 when it should be 57646.

Here is the explanation:
 u64 tmp;
 u32 result;
 …
 /* tmp = result = 4 * rates_996[0]
  *     = 4 * 480388888 = 0x72889c60
  */
 tmp = result;

 /* tmp = 0x72889c60 * 6144 = 0xabccea90000 */
 tmp *= SCALE;

 /* tmp = 0xabccea90000 / mcs_divisors[13]
  *     = 0xabccea90000 / 5120 = 0x8970bba6
  */
 do_div(tmp, mcs_divisors[rate->mcs]);

 /* result = 0x8970bba6 */
 result = tmp;

 /* normally (result * rate->nss) = 0x8970bba6 * 2 = 0x112e1774c,
  * but since result is u32, (result * rate->nss) = 0x12e1774c,
  * overflow happens and it loses the highest bit.
  * Then result =  0x12e1774c / 8 = 39595753,
  */
 result = (result * rate->nss) / 8;

Signed-off-by: Paul Zhang <quic_paulz@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull in wireless/main content since some new code would
otherwise conflict with it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In case of 4way handshake offload, transition disable policy
updated by the AP during EAPOL 3/4 is not updated to the upper layer.
This results in mismatch between transition disable policy
between the upper layer and the driver. This patch addresses this
issue by updating transition disable policy as part of port
authorization indication.

Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

STP topology change notification packets only have a payload of 7 bytes,
so they get dropped due to the skb->len < hdrlen + 8 check.
Fix this by removing the extra 8 from the skb->len check and checking the
return code on the skb_copy_bits calls.

Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The Bitrate for HE/EHT MCS6 is calculated wrongly due to the
incorrect MCS divisor value for mcs6. Fix it with the proper
value.

previous mcs_divisor value = (11769/6144) = 1.915527

fixed mcs_divisor value = (11377/6144) = 1.851725

Fixes: 9c97c88d2f4b ("cfg80211: Add support to calculate and report 4096-QAM HE rates")
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Link: https://lore.kernel.org/r/20220908181034.9936-1-quic_tamizhr@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add a helper function cfg80211_get_iftype_ext_capa() to
look up interface type-specific (extended) capabilities.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This was missing earlier, we need to remove links when
interfaces are being destroyed, and we also need to
stop (AP) operations when a link is being destroyed.
Address these issues to remove many warnings that will
otherwise appear in mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>