linux.git/net/wireless/trace.h, branch v5.1

cfg80211: add peer measurement with FTM initiator API

2018-11-09T10:20:13+00:00

Add a new "peer measurement" API, that can be used to measure
certain things related to a peer. Right now, only implement
FTM (flight time measurement) over it, but the idea is that
it'll be extensible to also support measuring the necessary
things to calculate e.g. angle-of-arrival for WiGig.

The API is structured to have a generic list of peers and
channels to measure with/on, and then for each of those a
set of measurements (again, only FTM right now) to perform.

Results are sent to the requesting socket, including a final
complete message.

Closing the controlling netlink socket will abort a running
measurement.

v3:
 - add a bit to report "final" for partial results
 - remove list keeping etc. and just unicast out the results
   to the requester (big code reduction ...)
 - also send complete message unicast, and as a result
   remove the multicast group
 - separate out struct cfg80211_pmsr_ftm_request_peer
   from struct cfg80211_pmsr_request_peer
 - document timeout == 0 if no timeout
 - disallow setting timeout nl80211 attribute to 0,
   must not include attribute for no timeout
 - make MAC address randomization optional
 - change num bursts exponent default to 0 (1 burst, rather
   rather than the old default of 15==don't care)

v4:
 - clarify NL80211_ATTR_TIMEOUT documentation

v5:
 - remove unnecessary nl80211 multicast/family changes
 - remove partial results bit/flag, final is sufficient
 - add max_bursts_exponent, max_ftms_per_burst to capability
 - rename "frames per burst" -> "FTMs per burst"

v6:
 - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down()
   and call it in leave, so the device can't go down with any
   pending measurements

v7:
 - wording fixes (Lior)
 - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior)

v8:
 - copyright statements
 - minor coding style fixes
 - fix error path leak

Signed-off-by: Johannes Berg

cfg80211: tracing: avoid 'idx' variable

2018-11-09T10:10:47+00:00

This variable shadows something that gets generated inside
the tracing macros, which causes sparse to warn. Avoid it
so sparse output is more readable, even if it doesn't seem
to cause any trouble.

Signed-off-by: Johannes Berg

cfg80211: sort tracing properly

2018-10-02T07:59:07+00:00

There were supposed to be two blocks - one for each direction
cfg80211 <-> driver, clean up the code to restore that.

Signed-off-by: Johannes Berg

cfg80211: support FTM responder configuration/statistics

2018-10-02T07:56:30+00:00

Allow userspace to enable fine timing measurement responder
functionality with configurable lci/civic parameters in AP mode.
This can be done at AP start or changing beacon parameters.

A new EXT_FEATURE flag is introduced for drivers to advertise
the capability.

Also nl80211 API support for retrieving statistics is added.

Signed-off-by: Johannes Berg 
Signed-off-by: Pradeep Kumar Chitrapu 
[remove unused cfg80211_ftm_responder_params, clarify docs,
 move validation into policy]
Signed-off-by: Johannes Berg

cfg80211: tracing: reuse wiphy_wdev_evt for rdev_get_txq_stats

2018-10-02T07:56:30+00:00

A simple cleanup, reuse the event definition that we already have.

Signed-off-by: Johannes Berg

cfg80211: Add support for 60GHz band channels 5 and 6

2018-08-28T09:23:08+00:00

The current support in the 60GHz band is for channels 1-4.
Add support for channels 5 and 6.
This requires enlarging ieee80211_channel.center_freq from u16 to u32.

Signed-off-by: Alexei Avshalom Lazar 
Signed-off-by: Johannes Berg

nl80211/mac80211: allow non-linear skb in rx_control_port

2018-07-06T12:34:42+00:00

The current implementation of cfg80211_rx_control_port assumed that the
caller could provide a contiguous region of memory for the control port
frame to be sent up to userspace.  Unfortunately, many drivers produce
non-linear skbs, especially for data frames.  This resulted in userspace
getting notified of control port frames with correct metadata (from
address, port, etc) yet garbage / nonsense contents, resulting in bad
handshakes, disconnections, etc.

mac80211 linearizes skbs containing management frames.  But it didn't
seem worthwhile to do this for control port frames.  Thus the signature
of cfg80211_rx_control_port was changed to take the skb directly.
nl80211 then takes care of obtaining control port frame data directly
from the (linear | non-linear) skb.

The caller is still responsible for freeing the skb,
cfg80211_rx_control_port does not take ownership of it.

Fixes: 6a671a50f819 ("nl80211: Add CMD_CONTROL_PORT_FRAME API")
Signed-off-by: Denis Kenzior 
[fix some kernel-doc formatting, add fixes tag]
Signed-off-by: Johannes Berg

cfg80211: Expose TXQ stats and parameters to userspace

2018-05-08T11:19:24+00:00

This adds support for exporting the mac80211 TXQ stats via nl80211 by
way of a nested TXQ stats attribute, as well as for configuring the
quantum and limits that were previously only changeable through debugfs.

This commit adds just the nl80211 API, a subsequent commit adds support to
mac80211 itself.

Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2018-04-01T03:33:04+00:00

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-03-31

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add raw BPF tracepoint API in order to have a BPF program type that
   can access kernel internal arguments of the tracepoints in their
   raw form similar to kprobes based BPF programs. This infrastructure
   also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which
   returns an anon-inode backed fd for the tracepoint object that allows
   for automatic detach of the BPF program resp. unregistering of the
   tracepoint probe on fd release, from Alexei.

2) Add new BPF cgroup hooks at bind() and connect() entry in order to
   allow BPF programs to reject, inspect or modify user space passed
   struct sockaddr, and as well a hook at post bind time once the port
   has been allocated. They are used in FB's container management engine
   for implementing policy, replacing fragile LD_PRELOAD wrapper
   intercepting bind() and connect() calls that only works in limited
   scenarios like glibc based apps but not for other runtimes in
   containerized applications, from Andrey.

3) BPF_F_INGRESS flag support has been added to sockmap programs for
   their redirect helper call bringing it in line with cls_bpf based
   programs. Support is added for both variants of sockmap programs,
   meaning for tx ULP hooks as well as recv skb hooks, from John.

4) Various improvements on BPF side for the nfp driver, besides others
   this work adds BPF map update and delete helper call support from
   the datapath, JITing of 32 and 64 bit XADD instructions as well as
   offload support of bpf_get_prandom_u32() call. Initial implementation
   of nfp packet cache has been tackled that optimizes memory access
   (see merge commit for further details), from Jakub and Jiong.

5) Removal of struct bpf_verifier_env argument from the print_bpf_insn()
   API has been done in order to prepare to use print_bpf_insn() soon
   out of perf tool directly. This makes the print_bpf_insn() API more
   generic and pushes the env into private data. bpftool is adjusted
   as well with the print_bpf_insn() argument removal, from Jiri.

6) Couple of cleanups and prep work for the upcoming BTF (BPF Type
   Format). The latter will reuse the current BPF verifier log as
   well, thus bpf_verifier_log() is further generalized, from Martin.

7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read
   and write support has been added in similar fashion to existing
   IPv6 IPV6_TCLASS socket option we already have, from Nikita.

8) Fixes in recent sockmap scatterlist API usage, which did not use
   sg_init_table() for initialization thus triggering a BUG_ON() in
   scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and
   uses a small helper sg_init_marker() to properly handle the affected
   cases, from Prashant.

9) Let the BPF core follow IDR code convention and therefore use the
   idr_preload() and idr_preload_end() helpers, which would also help
   idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory
   pressure, from Shaohua.

10) Last but not least, a spelling fix in an error message for the
    BPF cookie UID helper under BPF sample code, from Colin.
====================

Signed-off-by: David S. Miller

nl80211: Implement TX of control port frames

2018-03-29T11:44:19+00:00

This commit implements the TX side of NL80211_CMD_CONTROL_PORT_FRAME.
Userspace provides the raw EAPoL frame using NL80211_ATTR_FRAME.
Userspace should also provide the destination address and the protocol
type to use when sending the frame.  This is used to implement TX of
Pre-authentication frames.  If CONTROL_PORT_ETHERTYPE_NO_ENCRYPT is
specified, then the driver will be asked not to encrypt the outgoing
frame.

A new EXT_FEATURE flag is introduced so that nl80211 code can check
whether a given wiphy has capability to pass EAPoL frames over nl80211.

Signed-off-by: Denis Kenzior 
Signed-off-by: Johannes Berg