linux.git/net/wireless/scan.c, branch v6.2 Linux kernel source tree Merge tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next 2022-12-03T04:33:30+00:00 Jakub Kicinski kuba@kernel.org 2022-12-03T04:33:29+00:00 edd4e25a230dc8a977fca667db788424917ca2f3 Kalle Valo says: ==================== wireless-next patches for v6.2 Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7 devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise smaller features and fixes. Major changes: ath10k - store WLAN firmware version in SMEM image table mt76 - mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices - mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support - mt7915: add ack signal support - mt7915: enable coredump support - mt7921: remain_on_channel support - mt7921: channel context support iwlwifi - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support * tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits) wifi: ath10k: fix QCOM_SMEM dependency wifi: mt76: mt7921e: add pci .shutdown() support wifi: mt76: mt7915: mmio: fix naming convention wifi: mt76: mt7996: add support to configure spatial reuse parameter set wifi: mt76: mt7996: enable ack signal support wifi: mt76: mt7996: enable use_cts_prot support wifi: mt76: mt7915: rely on band_idx of mt76_phy wifi: mt76: mt7915: enable per bandwidth power limit support wifi: mt76: mt7915: introduce mt7915_get_power_bound() mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() wifi: mt76: do not send firmware FW_FEATURE_NON_DL region wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc wifi: mt76: fix coverity overrun-call in mt76_get_txpower() wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power wifi: mt76: mt7915: fix band_idx usage wifi: mt76: mt7915: enable .sta_set_txpwr support wifi: mt76: mt7915: add basedband Txpower info into debugfs wifi: mt76: mt7915: add support to configure spatial reuse parameter set wifi: mt76: mt7915: add missing MODULE_PARM_DESC ... ==================== Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Kalle Valo says:

====================
wireless-next patches for v6.2

Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7
devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise
smaller features and fixes.

Major changes:

ath10k
 - store WLAN firmware version in SMEM image table

mt76
 - mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices
 - mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support
 - mt7915: add ack signal support
 - mt7915: enable coredump support
 - mt7921: remain_on_channel support
 - mt7921: channel context support

iwlwifi
 - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
 - 320 MHz channels support

* tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits)
  wifi: ath10k: fix QCOM_SMEM dependency
  wifi: mt76: mt7921e: add pci .shutdown() support
  wifi: mt76: mt7915: mmio: fix naming convention
  wifi: mt76: mt7996: add support to configure spatial reuse parameter set
  wifi: mt76: mt7996: enable ack signal support
  wifi: mt76: mt7996: enable use_cts_prot support
  wifi: mt76: mt7915: rely on band_idx of mt76_phy
  wifi: mt76: mt7915: enable per bandwidth power limit support
  wifi: mt76: mt7915: introduce mt7915_get_power_bound()
  mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()
  wifi: mt76: do not send firmware FW_FEATURE_NON_DL region
  wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc
  wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
  wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices
  wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power
  wifi: mt76: mt7915: fix band_idx usage
  wifi: mt76: mt7915: enable .sta_set_txpwr support
  wifi: mt76: mt7915: add basedband Txpower info into debugfs
  wifi: mt76: mt7915: add support to configure spatial reuse parameter set
  wifi: mt76: mt7915: add missing MODULE_PARM_DESC
  ...
====================

Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wifi: cfg80211: use bss_from_pub() instead of container_of() 2022-12-01T14:09:10+00:00 Johannes Berg johannes.berg@intel.com 2022-10-17T07:03:48+00:00 61e41e5dfcc22e5e65b6537453fd2f03ac768b82 There's no need to open-code container_of() when we have bss_from_pub(). Use it. Change-Id: I074723717909ba211a40e6499f0c36df0e2ba4be Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
There's no need to open-code container_of() when we have
bss_from_pub(). Use it.

Change-Id: I074723717909ba211a40e6499f0c36df0e2ba4be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: cfg80211: fix comparison of BSS frequencies 2022-12-01T14:09:09+00:00 JUN-KYU SHIN jk.shin@newratek.com 2022-11-11T02:33:04+00:00 c1d3214d61d93eb4a3959c6b402230988d0f362d If the "channel->freq_offset" comparison is omitted in cmp_bss(), BSS with different kHz units cannot be distinguished in the S1G Band. So "freq_offset" should also be included in the comparison. Signed-off-by: JUN-KYU SHIN <jk.shin@newratek.com> Link: https://lore.kernel.org/r/20221111023301.6395-1-jk.shin@newratek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
If the "channel->freq_offset" comparison is omitted in cmp_bss(),
BSS with different kHz units cannot be distinguished in the S1G Band.
So "freq_offset" should also be included in the comparison.

Signed-off-by: JUN-KYU SHIN <jk.shin@newratek.com>
Link: https://lore.kernel.org/r/20221111023301.6395-1-jk.shin@newratek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-11-29T21:04:52+00:00 Jakub Kicinski kuba@kernel.org 2022-11-29T21:04:52+00:00 f2bb566f5c977ff010baaa9e5e14d9a75b06e5f2 tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
tools/lib/bpf/ringbuf.c
  927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap")
  b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wifi: cfg80211: don't allow multi-BSSID in S1G 2022-11-25T11:43:14+00:00 Johannes Berg johannes.berg@intel.com 2022-11-25T11:36:58+00:00 acd3c92acc7aaec50a94d0a7faf7ccd74e952493 In S1G beacon frames there shouldn't be multi-BSSID elements since that's not supported, remove that to avoid a potential integer underflow and/or misparsing the frames due to the different length of the fixed part of the frame. While at it, initialize non_tx_data so we don't send garbage values to the user (even if it doesn't seem to matter now.) Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
In S1G beacon frames there shouldn't be multi-BSSID elements
since that's not supported, remove that to avoid a potential
integer underflow and/or misparsing the frames due to the
different length of the fixed part of the frame.

While at it, initialize non_tx_data so we don't send garbage
values to the user (even if it doesn't seem to matter now.)

Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: cfg80211: fix buffer overflow in elem comparison 2022-11-25T11:43:05+00:00 Johannes Berg johannes.berg@intel.com 2022-11-25T11:36:57+00:00 9f16b5c82a025cd4c864737409234ddc44fb166a For vendor elements, the code here assumes that 5 octets are present without checking. Since the element itself is already checked to fit, we only need to check the length. Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.

Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge tag 'wireless-next-2022-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next 2022-11-18T11:44:36+00:00 David S. Miller davem@davemloft.net 2022-11-18T11:44:36+00:00 c609d739947894d7370eae4cf04eb2c49e910bcf Kalle Valo says: ==================== wireless-next patches for v6.2 Second set of patches for v6.2. Only driver patches this time, nothing really special. Unused platform data support was removed from wl1251 and rtw89 got WoWLAN support. Major changes: ath11k * support configuring channel dwell time during scan rtw89 * new dynamic header firmware format support * Wake-over-WLAN support rtl8xxxu * enable IEEE80211_HW_SUPPORT_FAST_XMIT ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Kalle Valo says:

====================
wireless-next patches for v6.2

Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.

Major changes:

ath11k

* support configuring channel dwell time during scan

rtw89

* new dynamic header firmware format support

* Wake-over-WLAN support

rtl8xxxu

* enable IEEE80211_HW_SUPPORT_FAST_XMIT
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
wifi: cfg80211: Avoid clashing function prototypes 2022-11-16T09:31:47+00:00 Gustavo A. R. Silva gustavoars@kernel.org 2022-11-08T20:23:55+00:00 02ae6a7034d7b2e3d89e33d73da10a1f156789a0 When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 73 warnings like these: drivers/net/wireless/intersil/orinoco/wext.c:1379:27: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_param *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../net/wireless/wext-compat.c:1607:33: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_point *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] [IW_IOCTL_IDX(SIOCSIWGENIE)] = (iw_handler) cfg80211_wext_siwgenie, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/net/wireless/intersil/orinoco/wext.c:1390:27: error: incompatible function pointer types initializing 'const iw_handler' (aka 'int (*const)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') with an expression of type 'int (struct net_device *, struct iw_request_info *, struct iw_param *, char *)' [-Wincompatible-function-pointer-types] IW_HANDLER(SIOCGIWRETRY, cfg80211_wext_giwretry), ^~~~~~~~~~~~~~~~~~~~~~ The cfg80211 Wireless Extension handler callbacks (iw_handler) use a union for the data argument. Actually use the union and perform explicit member selection in the function body instead of having a function prototype mismatch. There are no resulting binary differences before/after changes. These changes were made partly manually and partly with the help of Coccinelle. Link: https://github.com/KSPP/linux/issues/234 Link: https://reviews.llvm.org/D134831 [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/a68822bf8dd587988131bb6a295280cb4293f05d.1667934775.git.gustavoars@kernel.org 
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].

Fix a total of 73 warnings like these:

drivers/net/wireless/intersil/orinoco/wext.c:1379:27: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_param *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
        IW_HANDLER(SIOCGIWPOWER,        (iw_handler)orinoco_ioctl_getpower),
                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

../net/wireless/wext-compat.c:1607:33: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_point *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
        [IW_IOCTL_IDX(SIOCSIWGENIE)]    = (iw_handler) cfg80211_wext_siwgenie,
                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

../drivers/net/wireless/intersil/orinoco/wext.c:1390:27: error: incompatible function pointer types initializing 'const iw_handler' (aka 'int (*const)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') with an expression of type 'int (struct net_device *, struct iw_request_info *, struct iw_param *, char *)' [-Wincompatible-function-pointer-types]
        IW_HANDLER(SIOCGIWRETRY,        cfg80211_wext_giwretry),
                                        ^~~~~~~~~~~~~~~~~~~~~~

The cfg80211 Wireless Extension handler callbacks (iw_handler) use a
union for the data argument. Actually use the union and perform explicit
member selection in the function body instead of having a function
prototype mismatch. There are no resulting binary differences
before/after changes.

These changes were made partly manually and partly with the help of
Coccinelle.

Link: https://github.com/KSPP/linux/issues/234
Link: https://reviews.llvm.org/D134831 [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/a68822bf8dd587988131bb6a295280cb4293f05d.1667934775.git.gustavoars@kernel.org
wifi: cfg80211: silence a sparse RCU warning 2022-10-21T10:34:46+00:00 Johannes Berg johannes.berg@intel.com 2022-10-13T17:41:51+00:00 03c0ad4b06c3566de624b4f4b78ac1a5d1e4c8e7 All we're going to do with this pointer is assign it to another __rcu pointer, but sparse can't see that, so use rcu_access_pointer() to silence the warning here. Fixes: c90b93b5b782 ("wifi: cfg80211: update hidden BSSes to avoid WARN_ON") Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
All we're going to do with this pointer is assign it to
another __rcu pointer, but sparse can't see that, so
use rcu_access_pointer() to silence the warning here.

Fixes: c90b93b5b782 ("wifi: cfg80211: update hidden BSSes to avoid WARN_ON")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: cfg80211: update hidden BSSes to avoid WARN_ON 2022-10-10T07:51:34+00:00 Johannes Berg johannes.berg@intel.com 2022-10-05T21:11:43+00:00 c90b93b5b782891ebfda49d4e5da36632fefd5d1 When updating beacon elements in a non-transmitted BSS, also update the hidden sub-entries to the same beacon elements, so that a future update through other paths won't trigger a WARN_ON(). The warning is triggered because the beacon elements in the hidden BSSes that are children of the BSS should always be the same as in the parent. Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
When updating beacon elements in a non-transmitted BSS,
also update the hidden sub-entries to the same beacon
elements, so that a future update through other paths
won't trigger a WARN_ON().

The warning is triggered because the beacon elements in
the hidden BSSes that are children of the BSS should
always be the same as in the parent.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>