linux.git/net/wireless/scan.c, branch v5.12 Linux kernel source tree cfg80211: check S1G beacon compat element length 2021-04-08T12:44:54+00:00 Johannes Berg johannes.berg@intel.com 2021-04-08T12:28:27+00:00 b5ac0146492fc5c199de767e492be8a66471011a We need to check the length of this element so that we don't access data beyond its end. Fix that. Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Link: https://lore.kernel.org/r/20210408142826.f6f4525012de.I9fdeff0afdc683a6024e5ea49d2daa3cd2459d11@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
We need to check the length of this element so that we don't
access data beyond its end. Fix that.

Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Link: https://lore.kernel.org/r/20210408142826.f6f4525012de.I9fdeff0afdc683a6024e5ea49d2daa3cd2459d11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: avoid holding the RTNL when calling the driver 2021-01-26T10:55:50+00:00 Johannes Berg johannes.berg@intel.com 2021-01-22T15:19:43+00:00 a05829a7222e9d10c416dd2dbbf3929fe6646b89 Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Currently, _everything_ in cfg80211 holds the RTNL, and if you
have a slow USB device (or a few) you can get some bad lock
contention on that.

Fix that by re-adding a mutex to each wiphy/rdev as we had at
some point, so we have locking for the wireless_dev lists and
all the other things in there, and also so that drivers still
don't have to worry too much about it (they still won't get
parallel calls for a single device).

Then, we can restrict the RTNL to a few cases where we add or
remove interfaces and really need the added protection. Some
of the global list management still also uses the RTNL, since
we need to have it anyway for netdev management, but we only
hold the RTNL for very short periods of time here.

Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: Update TSF and TSF BSSID for multi BSS 2020-12-11T11:57:02+00:00 Ilan Peer ilan.peer@intel.com 2020-11-29T15:30:49+00:00 b45a19dd7e46462d0f34fcc05e5b1871d4c415ec When a new BSS entry is created based on multi BSS IE, the TSF and the TSF BSSID were not updated. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8377d5063827.I6f2011b6017c2ad507c61a3f1ca03b7177a46e32@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
When a new BSS entry is created based on multi BSS IE, the
TSF and the TSF BSSID were not updated. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8377d5063827.I6f2011b6017c2ad507c61a3f1ca03b7177a46e32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: scan PSC channels in case of scan with wildcard SSID 2020-12-11T11:55:16+00:00 Ayala Beker ayala.beker@intel.com 2020-11-29T15:30:48+00:00 d590a125eeb4e161a27527342ae57e3d7d778455 In case of scan request with wildcard SSID, or in case of more than one SSID in scan request, need to scan PSC channels even though all the co-located APs found during the legacy bands scan indicated that all the APs in their ESS are co-located, as we might find different networks on the PSC channels. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.736415a9ca5d.If5b3578ae85e11a707a5da07e66ba85928ba702c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
In case of scan request with wildcard SSID, or in case of more
than one SSID in scan request, need to scan PSC channels even though
all the co-located APs found during the legacy bands scan indicated
that all the APs in their ESS are co-located, as we might find different
networks on the PSC channels.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.736415a9ca5d.If5b3578ae85e11a707a5da07e66ba85928ba702c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211/cfg80211: fix potential infinite loop 2020-11-06T09:02:24+00:00 Colin Ian King colin.king@canonical.com 2020-10-29T22:24:07+00:00 ba5c25236bc3d399df82ebe923490ea8d2d35cf2 The for-loop iterates with a u8 loop counter and compares this with the loop upper limit of request->n_ssids which is an int type. There is a potential infinite loop if n_ssids is larger than the u8 loop counter, so fix this by making the loop counter an int. Addresses-Coverity: ("Infinite loop") Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The for-loop iterates with a u8 loop counter and compares this
with the loop upper limit of request->n_ssids which is an int type.
There is a potential infinite loop if n_ssids is larger than the
u8 loop counter, so fix this by making the loop counter an int.

Addresses-Coverity: ("Infinite loop")
Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: parse S1G Operation element for BSS channel 2020-09-28T11:53:05+00:00 Thomas Pedersen thomas@adapt-ip.com 2020-09-22T02:28:07+00:00 66b0564d7e757a193b6f8c925ae30997814fc026 Extract the BSS primary channel from the S1G Operation element. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-7-thomas@adapt-ip.com [remove the goto bits] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Extract the BSS primary channel from the S1G Operation
element.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-7-thomas@adapt-ip.com
[remove the goto bits]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: convert S1G beacon to scan results 2020-09-28T11:53:05+00:00 Thomas Pedersen thomas@adapt-ip.com 2020-09-22T02:28:06+00:00 9eaffe5078ca0808603cdd15c4eaf0106a996f3a The S1G beacon is an extension frame as opposed to management frame for the regular beacon. This means we may have to occasionally cast the frame buffer to a different header type. Luckily this isn't too bad as scan results mostly only care about the IEs. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211/cfg80211: support 6 GHz scanning 2020-09-28T11:53:04+00:00 Tova Mussai tova.mussai@intel.com 2020-09-18T09:33:13+00:00 c8cb5b854b40f2ce52ccd032fa19750f4181d5fc Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Support 6 GHz scanning, by
 * a new scan flag to scan for colocated BSSes advertised
   by (and found) APs on 2.4 & 5 GHz
 * doing the necessary reduced neighbor report parsing for
   this, to find them
 * adding the ability to split the scan request in case the
   device by itself cannot support this.

Also add some necessary bits in mac80211 to not break with
these changes.

Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net: wireless: Convert to use the preferred fallthrough macro 2020-08-27T09:24:28+00:00 Miaohe Lin linmiaohe@huawei.com 2020-08-22T08:23:23+00:00 7b506ff6f6903518af65fc35ae2fcd8305d8ff2b Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Convert the uses of fallthrough comments to fallthrough macro.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net: wireless: scan.c: delete or fix duplicated words 2020-08-27T09:23:26+00:00 Randy Dunlap rdunlap@infradead.org 2020-08-22T23:19:51+00:00 8cf5c86d55ad45d632985b7192e44590b9e184cc Drop repeated word "stored". Change "is is" to "it is". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Drop repeated word "stored".
Change "is is" to "it is".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>