linux.git/net/wireless/scan.c, branch v5.10 Linux kernel source tree cfg80211: parse S1G Operation element for BSS channel 2020-09-28T11:53:05+00:00 Thomas Pedersen thomas@adapt-ip.com 2020-09-22T02:28:07+00:00 66b0564d7e757a193b6f8c925ae30997814fc026 Extract the BSS primary channel from the S1G Operation element. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-7-thomas@adapt-ip.com [remove the goto bits] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Extract the BSS primary channel from the S1G Operation
element.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-7-thomas@adapt-ip.com
[remove the goto bits]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: convert S1G beacon to scan results 2020-09-28T11:53:05+00:00 Thomas Pedersen thomas@adapt-ip.com 2020-09-22T02:28:06+00:00 9eaffe5078ca0808603cdd15c4eaf0106a996f3a The S1G beacon is an extension frame as opposed to management frame for the regular beacon. This means we may have to occasionally cast the frame buffer to a different header type. Luckily this isn't too bad as scan results mostly only care about the IEs. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211/cfg80211: support 6 GHz scanning 2020-09-28T11:53:04+00:00 Tova Mussai tova.mussai@intel.com 2020-09-18T09:33:13+00:00 c8cb5b854b40f2ce52ccd032fa19750f4181d5fc Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Support 6 GHz scanning, by
 * a new scan flag to scan for colocated BSSes advertised
   by (and found) APs on 2.4 & 5 GHz
 * doing the necessary reduced neighbor report parsing for
   this, to find them
 * adding the ability to split the scan request in case the
   device by itself cannot support this.

Also add some necessary bits in mac80211 to not break with
these changes.

Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net: wireless: Convert to use the preferred fallthrough macro 2020-08-27T09:24:28+00:00 Miaohe Lin linmiaohe@huawei.com 2020-08-22T08:23:23+00:00 7b506ff6f6903518af65fc35ae2fcd8305d8ff2b Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Convert the uses of fallthrough comments to fallthrough macro.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net: wireless: scan.c: delete or fix duplicated words 2020-08-27T09:23:26+00:00 Randy Dunlap rdunlap@infradead.org 2020-08-22T23:19:51+00:00 8cf5c86d55ad45d632985b7192e44590b9e184cc Drop repeated word "stored". Change "is is" to "it is". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Drop repeated word "stored".
Change "is is" to "it is".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: allow the low level driver to flush the BSS table 2020-07-31T07:24:23+00:00 Emmanuel Grumbach emmanuel.grumbach@intel.com 2020-06-25T11:15:24+00:00 2f1805ea209a146669e0b660633ed22f49e1dd49 The low level driver adds its own opaque information in the BSS table in the cfg80211_bss structure. The low level driver may need to signal that this information is no longer relevant and needs to be recreated. Add an API to allow the low level driver to do that. iwlwifi needs this because it keeps there an information about the firmware's internal clock. This is kept in mac80211's struct ieee80211_bss::sync_device_ts. This information is populated while we scan, we add the internal firmware's clock to each beacon which allows us to program the firmware correctly after association so that it'll know when (in terms of its internal clock) the DTIM and TBTT will happen. When the firmware is reset this internal clock is reset as well and ieee80211_bss::sync_device_ts is no longer accurate. iwlwifi will call this new API any time the firmware is started. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The low level driver adds its own opaque information
in the BSS table in the cfg80211_bss structure.

The low level driver may need to signal that this information
is no longer relevant and needs to be recreated.
Add an API to allow the low level driver to do that.

iwlwifi needs this because it keeps there an information about
the firmware's internal clock. This is kept in mac80211's
struct ieee80211_bss::sync_device_ts.
This information is populated while we scan, we add the
internal firmware's clock to each beacon which allows us to
program the firmware correctly after association so that
it'll know when (in terms of its internal clock) the DTIM
and TBTT will happen.

When the firmware is reset this internal clock is reset as
well and ieee80211_bss::sync_device_ts is no longer accurate.

iwlwifi will call this new API any time the firmware is started.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: express channels with a KHz component 2020-04-24T10:33:43+00:00 Thomas Pedersen thomas@adapt-ip.com 2020-04-02T01:18:03+00:00 934f4c7dd3a544bb8000f7436f1f0e12e04ebc37 Some bands (S1G) define channels centered on a non-integer MHz. Give ieee80211_channel and cfg80211_chan_def a freq_offset component where the final frequency can be expressed as: MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset; Also provide some helper functions to do the frequency conversion and test for equality. Retain the existing interface to frequency and channel conversion helpers, and expose new ones which handle frequencies in units of KHz. Some internal functions (net/wireless/chan.c) pass around a frequency value. Convert these to units of KHz. mesh, ibss, wext, etc. are currently ignored. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Some bands (S1G) define channels centered on a non-integer
MHz. Give ieee80211_channel and cfg80211_chan_def a
freq_offset component where the final frequency can be
expressed as:

MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset;

Also provide some helper functions to do the frequency
conversion and test for equality.

Retain the existing interface to frequency and channel
conversion helpers, and expose new ones which handle
frequencies in units of KHz.

Some internal functions (net/wireless/chan.c) pass around
a frequency value. Convert these to units of KHz.

mesh, ibss, wext, etc. are currently ignored.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2020-03-30T04:25:29+00:00 David S. Miller davem@davemloft.net 2020-03-30T04:25:29+00:00 f0b5989745c3e0e92424d36869a97e4e8df7ab13 Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net> 
Minor comment conflict in mac80211.

Signed-off-by: David S. Miller <davem@davemloft.net>
cfg80211: Do not warn on same channel at the end of CSA 2020-03-26T14:50:10+00:00 Ilan Peer ilan.peer@intel.com 2020-03-26T13:09:43+00:00 05dcb8bb258575a8dd3499d0d78bd2db633c2b23 When cfg80211_update_assoc_bss_entry() is called, there is a verification that the BSS channel actually changed. As some APs use CSA also for bandwidth changes, this would result with a kernel warning. Fix this by removing the WARN_ON(). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
When cfg80211_update_assoc_bss_entry() is called, there is a
verification that the BSS channel actually changed. As some APs use
CSA also for bandwidth changes, this would result with a kernel
warning.

Fix this by removing the WARN_ON().

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: remove support for adjacent channel compensation 2020-02-21T19:00:39+00:00 Emmanuel Grumbach emmanuel.grumbach@intel.com 2020-02-14T22:23:38+00:00 7bb106eb689101dc56cc205d5fb4ecf5c0554348 The only driver that used that was iwlwifi and it removed support for this. Remove the feature here as well. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200214232336.a530de38e511.I393bc395f6037c8cca6421ed550e3072dc248aed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The only driver that used that was iwlwifi and it removed
support for this. Remove the feature here as well.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200214232336.a530de38e511.I393bc395f6037c8cca6421ed550e3072dc248aed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>