linux.git/net/wireless/core.c, branch v6.2 Linux kernel source tree wifi: cfg80211/mac80211: check EHT capability size correctly 2022-08-25T08:41:24+00:00 Johannes Berg johannes.berg@intel.com 2022-08-16T09:26:23+00:00 ea5cba269fb1fe22b84f4d01bb3d56320e6ffa3e For AP/non-AP the EHT MCS/NSS subfield size differs, the 4-octet subfield is only used for 20 MHz-only non-AP STA. Pass an argument around everywhere to be able to parse it properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
For AP/non-AP the EHT MCS/NSS subfield size differs, the
4-octet subfield is only used for 20 MHz-only non-AP STA.
Pass an argument around everywhere to be able to parse it
properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: cfg80211: clean up links appropriately 2022-07-15T09:43:18+00:00 Johannes Berg johannes.berg@intel.com 2022-07-06T07:57:42+00:00 cdf0a0a80c841cfede6926d417a8756ea4c52d26 This was missing earlier, we need to remove links when interfaces are being destroyed, and we also need to stop (AP) operations when a link is being destroyed. Address these issues to remove many warnings that will otherwise appear in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
This was missing earlier, we need to remove links when
interfaces are being destroyed, and we also need to
stop (AP) operations when a link is being destroyed.
Address these issues to remove many warnings that will
otherwise appear in mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: cfg80211: Increase akm_suites array size in cfg80211_crypto_settings 2022-07-01T10:07:08+00:00 Veerendranath Jakkam quic_vjakkam@quicinc.com 2022-05-23T13:25:58+00:00 ecad3b0b99bff7247a11f8c7cb19ac9b0cb28b09 Increase akm_suites array size in struct cfg80211_crypto_settings to 10 and advertise the capability to userspace. This allows userspace to send more than two AKMs to driver in netlink commands such as NL80211_CMD_CONNECT. This capability is needed for implementing WPA3-Personal transition mode correctly with any driver that handles roaming internally. Currently, the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256, SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing the akm_suites array size to 10 should be reasonable for future usecases. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Increase akm_suites array size in struct cfg80211_crypto_settings to 10
and advertise the capability to userspace. This allows userspace to send
more than two AKMs to driver in netlink commands such as
NL80211_CMD_CONNECT.

This capability is needed for implementing WPA3-Personal transition mode
correctly with any driver that handles roaming internally. Currently,
the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256,
SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing
the akm_suites array size to 10 should be reasonable for future
usecases.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: cfg80211: do some rework towards MLO link APIs 2022-06-20T10:54:58+00:00 Johannes Berg johannes.berg@intel.com 2022-04-14T14:50:57+00:00 7b0a0e3c3a88260b6fcb017e49f198463aa62ed1 In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.

So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.

For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.

Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: fix race in netlink owner interface destruction 2022-02-04T15:31:44+00:00 Johannes Berg johannes.berg@intel.com 2022-02-01T13:09:51+00:00 f0a6fd1527067da537e9c48390237488719948ed My previous fix here to fix the deadlock left a race where the exact same deadlock (see the original commit referenced below) can still happen if cfg80211_destroy_ifaces() already runs while nl80211_netlink_notify() is still marking some interfaces as nl_owner_dead. The race happens because we have two loops here - first we dev_close() all the netdevs, and then we destroy them. If we also have two netdevs (first one need only be a wdev though) then we can find one during the first iteration, close it, and go to the second iteration -- but then find two, and try to destroy also the one we didn't close yet. Fix this by only iterating once. Reported-by: Toke Høiland-Jørgensen <toke@redhat.com> Fixes: ea6b2098dd02 ("cfg80211: fix locking in netlink owner interface destruction") Tested-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20220201130951.22093-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
My previous fix here to fix the deadlock left a race where
the exact same deadlock (see the original commit referenced
below) can still happen if cfg80211_destroy_ifaces() already
runs while nl80211_netlink_notify() is still marking some
interfaces as nl_owner_dead.

The race happens because we have two loops here - first we
dev_close() all the netdevs, and then we destroy them. If we
also have two netdevs (first one need only be a wdev though)
then we can find one during the first iteration, close it,
and go to the second iteration -- but then find two, and try
to destroy also the one we didn't close yet.

Fix this by only iterating once.

Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Fixes: ea6b2098dd02 ("cfg80211: fix locking in netlink owner interface destruction")
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220201130951.22093-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface 2021-12-20T10:18:30+00:00 Sriram R quic_srirrama@quicinc.com 2021-12-02T01:38:40+00:00 701fdfe348f7e5c9fe71caa3558d63dbb4bc4b81 Currently cfg80211 checks for invalid channels whenever there is a regulatory update and stops the active interfaces if it is operating on an unsupported channel in the new regulatory domain. This is done based on a regulatory flag REGULATORY_IGNORE_STALE_KICKOFF set during wiphy registration which disables this enforcement when unsupported interface modes are supported by driver. Add support to enable this enforcement when Mesh Point interface type is advertised by drivers. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1638409120-28997-1-git-send-email-quic_srirrama@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Currently cfg80211 checks for invalid channels whenever there is a
regulatory update and stops the active interfaces if it is operating on
an unsupported channel in the new regulatory domain.

This is done based on a regulatory flag REGULATORY_IGNORE_STALE_KICKOFF
set during wiphy registration which disables this enforcement when
unsupported interface modes are supported by driver.

Add support to enable this enforcement when Mesh Point interface type
is advertised by drivers.

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1638409120-28997-1-git-send-email-quic_srirrama@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard 2021-12-20T09:37:36+00:00 Lorenzo Bianconi lorenzo@kernel.org 2021-11-29T13:11:24+00:00 a95bfb876fa87e2d0fa718ee61a8030ddf162d2b ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
ETSI standard defines "Offchannel CAC" as:
"Off-Channel CAC is performed by a number of non-continuous checks
spread over a period in time. This period, which is required to
determine the presence of radar signals, is defined as the Off-Channel
CAC Time..
Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time
4 hours..".
mac80211 implementation refers to a dedicated hw chain used for continuous
radar monitoring. Rename offchannel_* references to background_* in
order to avoid confusion with ETSI standard.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: move offchan_cac_event to a dedicated work 2021-11-19T08:38:50+00:00 Lorenzo Bianconi lorenzo@kernel.org 2021-10-27T09:03:42+00:00 1507b153198137dfa9cb4bec7c5dee07089ec3af In order to make cfg80211_offchan_cac_abort() (renamed from cfg80211_offchan_cac_event) callable in other contexts and without so much locking restrictions, make it trigger a new work instead of operating directly. Do some other renames while at it to clarify. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org [rewrite commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
In order to make cfg80211_offchan_cac_abort() (renamed from
cfg80211_offchan_cac_event) callable in other contexts and
without so much locking restrictions, make it trigger a new
work instead of operating directly.

Do some other renames while at it to clarify.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org
[rewrite commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: implement APIs for dedicated radar detection HW 2021-11-19T08:38:49+00:00 Lorenzo Bianconi lorenzo@kernel.org 2021-10-23T09:10:50+00:00 bc2dfc02836b1133d1bf4d22aa13d48ac98eabef If a dedicated (off-channel) radar detection hardware (chain) is available in the hardware/driver, allow this to be used by calling the NL80211_CMD_RADAR_DETECT command with a new flag attribute requesting off-channel radar detection is used. Offchannel CAC (channel availability check) avoids the CAC downtime when switching to a radar channel or when turning on the AP. Drivers advertise support for this using the new feature flag NL80211_EXT_FEATURE_RADAR_OFFCHAN. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org [remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(), remove gfp_t argument, fix documentation, fix tracing] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
If a dedicated (off-channel) radar detection hardware (chain)
is available in the hardware/driver, allow this to be used by
calling the NL80211_CMD_RADAR_DETECT command with a new flag
attribute requesting off-channel radar detection is used.

Offchannel CAC (channel availability check) avoids the CAC
downtime when switching to a radar channel or when turning on
the AP.

Drivers advertise support for this using the new feature flag
NL80211_EXT_FEATURE_RADAR_OFFCHAN.

Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org
[remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(),
 remove gfp_t argument, fix documentation, fix tracing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2021-10-28T17:43:58+00:00 Jakub Kicinski kuba@kernel.org 2021-10-28T17:43:58+00:00 7df621a3eea6761bc83e641aaca6963210c7290d include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
include/net/sock.h
  7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable")
  4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout")

drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
  0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table")
  e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.")

Adjacent code addition in both cases, keep both.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>