linux.git/net/tipc, branch v5.7-rc2 Linux kernel source tree tipc: fix incorrect increasing of link window 2020-04-15T23:23:33+00:00 Tuong Lien tuong.t.lien@dektech.com.au 2020-04-15T11:34:49+00:00 edadedf1c5b4e4404192a0a4c3c0c05e3b7672ab In commit 16ad3f4022bb ("tipc: introduce variable window congestion control"), we allow link window to change with the congestion avoidance algorithm. However, there is a bug that during the slow-start if packet retransmission occurs, the link will enter the fast-recovery phase, set its window to the 'ssthresh' which is never less than 300, so the link window suddenly increases to that limit instead of decreasing. Consequently, two issues have been observed: - For broadcast-link: it can leave a gap between the link queues that a new packet will be inserted and sent before the previous ones, i.e. not in-order. - For unicast: the algorithm does not work as expected, the link window jumps to the slow-start threshold whereas packet retransmission occurs. This commit fixes the issues by avoiding such the link window increase, but still decreasing if the 'ssthresh' is lowered. Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 
In commit 16ad3f4022bb ("tipc: introduce variable window congestion
control"), we allow link window to change with the congestion avoidance
algorithm. However, there is a bug that during the slow-start if packet
retransmission occurs, the link will enter the fast-recovery phase, set
its window to the 'ssthresh' which is never less than 300, so the link
window suddenly increases to that limit instead of decreasing.

Consequently, two issues have been observed:

- For broadcast-link: it can leave a gap between the link queues that a
new packet will be inserted and sent before the previous ones, i.e. not
in-order.

- For unicast: the algorithm does not work as expected, the link window
jumps to the slow-start threshold whereas packet retransmission occurs.

This commit fixes the issues by avoiding such the link window increase,
but still decreasing if the 'ssthresh' is lowered.

Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: Add a missing case of TIPC_DIRECT_MSG type 2020-03-26T18:21:02+00:00 Hoang Le hoang.h.le@dektech.com.au 2020-03-26T02:50:29+00:00 8b1e5b0a99f04bda2d6c85ecfe5e68a356c10914 In the commit f73b12812a3d ("tipc: improve throughput between nodes in netns"), we're missing a check to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for this message type. So, throughput improvement is not significant as expected. Besides that, when sending a large message with that type, we're also handle wrong receiving queue, it should be enqueued in socket receiving instead of multicast messages. Fix this by adding the missing case for TIPC_DIRECT_MSG. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Reported-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In the commit f73b12812a3d
("tipc: improve throughput between nodes in netns"), we're missing a check
to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for
this message type. So, throughput improvement is not significant as
expected.

Besides that, when sending a large message with that type, we're also
handle wrong receiving queue, it should be enqueued in socket receiving
instead of multicast messages.

Fix this by adding the missing case for TIPC_DIRECT_MSG.

Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns")
Reported-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: add NULL pointer check to prevent kernel oops 2020-03-15T07:07:00+00:00 Hoang Le hoang.h.le@dektech.com.au 2020-03-13T03:18:03+00:00 746a1eda682cb7b5cd22f1b437da2121af64fbfe Calling: tipc_node_link_down()-> - tipc_node_write_unlock()->tipc_mon_peer_down() - tipc_mon_peer_down() just after disabling bearer could be caused kernel oops. Fix this by adding a sanity check to make sure valid memory access. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 
Calling:
tipc_node_link_down()->
   - tipc_node_write_unlock()->tipc_mon_peer_down()
   - tipc_mon_peer_down()
  just after disabling bearer could be caused kernel oops.

Fix this by adding a sanity check to make sure valid memory
access.

Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: simplify trivial boolean return 2020-03-15T07:07:00+00:00 Hoang Le hoang.h.le@dektech.com.au 2020-03-13T03:18:02+00:00 e228c5c0882e809e4fb3eafd07ec25ff50f65ac5 Checking and returning 'true' boolean is useless as it will be returning at end of function Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Checking and returning 'true' boolean is useless as it will be
returning at end of function

Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: add missing attribute validation for MTU property 2020-03-03T21:28:49+00:00 Jakub Kicinski kuba@kernel.org 2020-03-03T05:05:23+00:00 213320a67962ff6e7b83b704d55cbebc341426db Add missing attribute validation for TIPC_NLA_PROP_MTU to the netlink policy. Fixes: 901271e0403a ("tipc: implement configuration of UDP media MTU") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add missing attribute validation for TIPC_NLA_PROP_MTU
to the netlink policy.

Fixes: 901271e0403a ("tipc: implement configuration of UDP media MTU")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: fix successful connect() but timed out 2020-02-10T09:23:00+00:00 Tuong Lien tuong.t.lien@dektech.com.au 2020-02-10T08:35:44+00:00 5391a87751a164b3194864126f3b016038abc9fe In commit 9546a0b7ce00 ("tipc: fix wrong connect() return code"), we fixed the issue with the 'connect()' that returns zero even though the connecting has failed by waiting for the connection to be 'ESTABLISHED' really. However, the approach has one drawback in conjunction with our 'lightweight' connection setup mechanism that the following scenario can happen: (server) (client) +- accept()| | wait_for_conn() | | |connect() -------+ | |<-------[SYN]---------| > sleeping | | *CONNECTING | |--------->*ESTABLISHED | | |--------[ACK]-------->*ESTABLISHED > wakeup() send()|--------[DATA]------->|\ > wakeup() send()|--------[DATA]------->| | > wakeup() . . . . |-> recvq . . . . . | . send()|--------[DATA]------->|/ > wakeup() close()|--------[FIN]-------->*DISCONNECTING | *DISCONNECTING | | | ~~~~~~~~~~~~~~~~~~> schedule() | wait again . . | ETIMEDOUT Upon the receipt of the server 'ACK', the client becomes 'ESTABLISHED' and the 'wait_for_conn()' process is woken up but not run. Meanwhile, the server starts to send a number of data following by a 'close()' shortly without waiting any response from the client, which then forces the client socket to be 'DISCONNECTING' immediately. When the wait process is switched to be running, it continues to wait until the timer expires because of the unexpected socket state. The client 'connect()' will finally get ‘-ETIMEDOUT’ and force to release the socket whereas there remains the messages in its receive queue. Obviously the issue would not happen if the server had some delay prior to its 'close()' (or the number of 'DATA' messages is large enough), but any kind of delay would make the connection setup/shutdown "heavy". We solve this by simply allowing the 'connect()' returns zero in this particular case. The socket is already 'DISCONNECTING', so any further write will get '-EPIPE' but the socket is still able to read the messages existing in its receive queue. Note: This solution doesn't break the previous one as it deals with a different situation that the socket state is 'DISCONNECTING' but has no error (i.e. sk->sk_err = 0). Fixes: 9546a0b7ce00 ("tipc: fix wrong connect() return code") Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 
In commit 9546a0b7ce00 ("tipc: fix wrong connect() return code"), we
fixed the issue with the 'connect()' that returns zero even though the
connecting has failed by waiting for the connection to be 'ESTABLISHED'
really. However, the approach has one drawback in conjunction with our
'lightweight' connection setup mechanism that the following scenario
can happen:

          (server)                        (client)

   +- accept()|                      |             wait_for_conn()
   |          |                      |connect() -------+
   |          |<-------[SYN]---------|                 > sleeping
   |          |                      *CONNECTING       |
   |--------->*ESTABLISHED           |                 |
              |--------[ACK]-------->*ESTABLISHED      > wakeup()
        send()|--------[DATA]------->|\                > wakeup()
        send()|--------[DATA]------->| |               > wakeup()
          .   .          .           . |-> recvq       .
          .   .          .           . |               .
        send()|--------[DATA]------->|/                > wakeup()
       close()|--------[FIN]-------->*DISCONNECTING    |
              *DISCONNECTING         |                 |
              |                      ~~~~~~~~~~~~~~~~~~> schedule()
                                                       | wait again
                                                       .
                                                       .
                                                       | ETIMEDOUT

Upon the receipt of the server 'ACK', the client becomes 'ESTABLISHED'
and the 'wait_for_conn()' process is woken up but not run. Meanwhile,
the server starts to send a number of data following by a 'close()'
shortly without waiting any response from the client, which then forces
the client socket to be 'DISCONNECTING' immediately. When the wait
process is switched to be running, it continues to wait until the timer
expires because of the unexpected socket state. The client 'connect()'
will finally get ‘-ETIMEDOUT’ and force to release the socket whereas
there remains the messages in its receive queue.

Obviously the issue would not happen if the server had some delay prior
to its 'close()' (or the number of 'DATA' messages is large enough),
but any kind of delay would make the connection setup/shutdown "heavy".
We solve this by simply allowing the 'connect()' returns zero in this
particular case. The socket is already 'DISCONNECTING', so any further
write will get '-EPIPE' but the socket is still able to read the
messages existing in its receive queue.

Note: This solution doesn't break the previous one as it deals with a
different situation that the socket state is 'DISCONNECTING' but has no
error (i.e. sk->sk_err = 0).

Fixes: 9546a0b7ce00 ("tipc: fix wrong connect() return code")
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: make three functions static 2020-02-10T09:23:00+00:00 Chen Wandun chenwandun@huawei.com 2020-02-10T08:11:09+00:00 2437fd7baf299c7b8a39fa3e727755e84ee7c4ea Fix the following sparse warning: net/tipc/node.c:281:6: warning: symbol 'tipc_node_free' was not declared. Should it be static? net/tipc/node.c:2801:5: warning: symbol '__tipc_nl_node_set_key' was not declared. Should it be static? net/tipc/node.c:2878:5: warning: symbol '__tipc_nl_node_flush_key' was not declared. Should it be static? Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Fixes: e1f32190cf7d ("tipc: add support for AEAD key setting via netlink") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Fix the following sparse warning:

net/tipc/node.c:281:6: warning: symbol 'tipc_node_free' was not declared. Should it be static?
net/tipc/node.c:2801:5: warning: symbol '__tipc_nl_node_set_key' was not declared. Should it be static?
net/tipc/node.c:2878:5: warning: symbol '__tipc_nl_node_flush_key' was not declared. Should it be static?

Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Fixes: e1f32190cf7d ("tipc: add support for AEAD key setting via netlink")

Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2020-01-29T00:02:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-29T00:02:33+00:00 bd2463ac7d7ec51d432f23bf0e893fb371a908cd Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ... 
Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...
Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu 2020-01-25T09:05:23+00:00 Ingo Molnar mingo@kernel.org 2020-01-25T09:05:23+00:00 f8a4bb6bfa639fbdd07aede615be6dffe86a9713 Pull RCU updates from Paul E. McKenney: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Pull RCU updates from Paul E. McKenney:

 - Expedited grace-period updates
 - kfree_rcu() updates
 - RCU list updates
 - Preemptible RCU updates
 - Torture-test updates
 - Miscellaneous fixes
 - Documentation updates

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-01-09T20:13:43+00:00 David S. Miller davem@davemloft.net 2020-01-09T20:10:26+00:00 a2d6d7ae591c47ebc04926cb29a840adfdde49e6 The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net> 
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure.  The resolution used here is
from Petr Machata.

Signed-off-by: David S. Miller <davem@davemloft.net>