linux.git/net/tipc, branch v5.5-rc5

tipc: fix use-after-free in tipc_disc_rcv()

2019-12-11T01:45:04+00:00

In the function 'tipc_disc_rcv()', the 'msg_peer_net_hash()' is called
to read the header data field but after the message skb has been freed,
that might result in a garbage value...

This commit fixes it by defining a new local variable to store the data
first, just like the other header fields' handling.

Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns")
Acked-by: Jon Maloy 
Signed-off-by: Tuong Lien 
Signed-off-by: David S. Miller

tipc: fix retrans failure due to wrong destination

2019-12-11T01:45:04+00:00

When a user message is sent, TIPC will check if the socket has faced a
congestion at link layer. If that happens, it will make a sleep to wait
for the congestion to disappear. This leaves a gap for other users to
take over the socket (e.g. multi threads) since the socket is released
as well. Also, in case of connectionless (e.g. SOCK_RDM), user is free
to send messages to various destinations (e.g. via 'sendto()'), then
the socket's preformatted header has to be updated correspondingly
prior to the actual payload message building.

Unfortunately, the latter action is done before the first action which
causes a condition issue that the destination of a certain message can
be modified incorrectly in the middle, leading to wrong destination
when that message is built. Consequently, when the message is sent to
the link layer, it gets stuck there forever because the peer node will
simply reject it. After a number of retransmission attempts, the link
is eventually taken down and the retransmission failure is reported.

This commit fixes the problem by rearranging the order of actions to
prevent the race condition from occurring, so the message building is
'atomic' and its header will not be modified by anyone.

Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion")
Acked-by: Jon Maloy 
Signed-off-by: Tuong Lien 
Signed-off-by: David S. Miller

tipc: fix potential hanging after b/rcast changing

2019-12-11T01:45:04+00:00

In commit c55c8edafa91 ("tipc: smooth change between replicast and
broadcast"), we allow instant switching between replicast and broadcast
by sending a dummy 'SYN' packet on the last used link to synchronize
packets on the links. The 'SYN' message is an object of link congestion
also, so if that happens, a 'SOCK_WAKEUP' will be scheduled to be sent
back to the socket...
However, in that commit, we simply use the same socket 'cong_link_cnt'
counter for both the 'SYN' & normal payload message sending. Therefore,
if both the replicast & broadcast links are congested, the counter will
be not updated correctly but overwritten by the latter congestion.
Later on, when the 'SOCK_WAKEUP' messages are processed, the counter is
reduced one by one and eventually overflowed. Consequently, further
activities on the socket will only wait for the false congestion signal
to disappear but never been met.

Because sending the 'SYN' message is vital for the mechanism, it should
be done anyway. This commit fixes the issue by marking the message with
an error code e.g. 'TIPC_ERR_NO_PORT', so its sending should not face a
link congestion, there is no need to touch the socket 'cong_link_cnt'
either. In addition, in the event of any error (e.g. -ENOBUFS), we will
purge the entire payload message queue and make a return immediately.

Fixes: c55c8edafa91 ("tipc: smooth change between replicast and broadcast")
Acked-by: Jon Maloy 
Signed-off-by: Tuong Lien 
Signed-off-by: David S. Miller

tipc: fix name table rbtree issues

2019-12-11T01:45:04+00:00

The current rbtree for service ranges in the name table is built based
on the 'lower' & 'upper' range values resulting in a flaw in the rbtree
searching. Some issues have been observed in case of range overlapping:

Case #1: unable to withdraw a name entry:
After some name services are bound, all of them are withdrawn by user
but one remains in the name table forever. This corrupts the table and
that service becomes dummy i.e. no real port.
E.g.

                /
           {22, 22}
              /
             /
   --->  {10, 50}
           /  \
          /    \
    {10, 30}  {20, 60}

The node {10, 30} cannot be removed since the rbtree searching stops at
the node's ancestor i.e. {10, 50}, so starting from it will never reach
the finding node.

Case #2: failed to send data in some cases:
E.g. Two service ranges: {20, 60}, {10, 50} are bound. The rbtree for
this service will be one of the two cases below depending on the order
of the bindings:

        {20, 60}             {10, 50} <--
          /  \                 /  \
         /    \               /    \
    {10, 50}  NIL <--       NIL  {20, 60}

          (a)                    (b)

Now, try to send some data to service {30}, there will be two results:
(a): Failed, no route to host.
(b): Ok.

The reason is that the rbtree searching will stop at the pointing node
as shown above.

Case #3: Same as case #2b above but if the data sending's scope is
local and the {10, 50} is published by a peer node, then it will result
in 'no route to host' even though the other {20, 60} is for example on
the local node which should be able to get the data.

The issues are actually due to the way we built the rbtree. This commit
fixes it by introducing an additional field to each node - named 'max',
which is the largest 'upper' of that node subtree. The 'max' value for
each subtrees will be propagated correctly whenever a node is inserted/
removed or the tree is rebalanced by the augmented rbtree callbacks.

By this way, we can change the rbtree searching appoarch to solve the
issues above. Another benefit from this is that we can now improve the
searching for a next range matching e.g. in case of multicast, so get
rid of the unneeded looping over all nodes in the tree.

Acked-by: Jon Maloy 
Signed-off-by: Tuong Lien 
Signed-off-by: David S. Miller

tipc: fix ordering of tipc module init and exit routine

2019-12-06T20:01:09+00:00

In order to set/get/dump, the tipc uses the generic netlink
infrastructure. So, when tipc module is inserted, init function
calls genl_register_family().
After genl_register_family(), set/get/dump commands are immediately
allowed and these callbacks internally use the net_generic.
net_generic is allocated by register_pernet_device() but this
is called after genl_register_family() in the __init function.
So, these callbacks would use un-initialized net_generic.

Test commands:
    #SHELL1
    while :
    do
        modprobe tipc
        modprobe -rv tipc
    done

    #SHELL2
    while :
    do
        tipc link list
    done

Splat looks like:
[   59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
[   59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
[   59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
[   59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
[   59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
[   59.622550][ T2780] NET: Registered protocol family 30
[   59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202
[   59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907
[   59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149
[   59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1
[   59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40
[   59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328
[   59.624639][ T2788] FS:  00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[   59.624645][ T2788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   59.625875][ T2780] tipc: Started in single node mode
[   59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0
[   59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   59.636478][ T2788] Call Trace:
[   59.637025][ T2788]  tipc_nl_add_bc_link+0x179/0x1470 [tipc]
[   59.638219][ T2788]  ? lock_downgrade+0x6e0/0x6e0
[   59.638923][ T2788]  ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
[   59.639533][ T2788]  ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
[   59.640160][ T2788]  ? mutex_lock_io_nested+0x1380/0x1380
[   59.640746][ T2788]  tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
[   59.641356][ T2788]  ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
[   59.642088][ T2788]  ? __skb_ext_del+0x270/0x270
[   59.642594][ T2788]  genl_lock_dumpit+0x85/0xb0
[   59.643050][ T2788]  netlink_dump+0x49c/0xed0
[   59.643529][ T2788]  ? __netlink_sendskb+0xc0/0xc0
[   59.644044][ T2788]  ? __netlink_dump_start+0x190/0x800
[   59.644617][ T2788]  ? __mutex_unlock_slowpath+0xd0/0x670
[   59.645177][ T2788]  __netlink_dump_start+0x5a0/0x800
[   59.645692][ T2788]  genl_rcv_msg+0xa75/0xe90
[   59.646144][ T2788]  ? __lock_acquire+0xdfe/0x3de0
[   59.646692][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.647340][ T2788]  ? genl_lock_dumpit+0xb0/0xb0
[   59.647821][ T2788]  ? genl_unlock+0x20/0x20
[   59.648290][ T2788]  ? genl_parallel_done+0xe0/0xe0
[   59.648787][ T2788]  ? find_held_lock+0x39/0x1d0
[   59.649276][ T2788]  ? genl_rcv+0x15/0x40
[   59.649722][ T2788]  ? lock_contended+0xcd0/0xcd0
[   59.650296][ T2788]  netlink_rcv_skb+0x121/0x350
[   59.650828][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.651491][ T2788]  ? netlink_ack+0x940/0x940
[   59.651953][ T2788]  ? lock_acquire+0x164/0x3b0
[   59.652449][ T2788]  genl_rcv+0x24/0x40
[   59.652841][ T2788]  netlink_unicast+0x421/0x600
[ ... ]

Fixes: 7e4369057806 ("tipc: fix a slab object leak")
Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Taehee Yoo 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller

net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup

2019-12-04T20:27:13+00:00

ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.

All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().

This requires some changes in all the callers, as these two functions
take different arguments and have different return types.

Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu 
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

tipc: fix duplicate SYN messages under link congestion

2019-11-29T07:09:15+00:00

Scenario:
1. A client socket initiates a SYN message to a listening socket.
2. The send link is congested, the SYN message is put in the
send link and a wakeup message is put in wakeup queue.
3. The congestion situation is abated, the wakeup message is
pulled out of the wakeup queue. Function tipc_sk_push_backlog()
is called to send out delayed messages by Nagle. However,
the client socket is still in CONNECTING state. So, it sends
the SYN message in the socket write queue to the listening socket
again.
4. The listening socket receives the first SYN message and creates
first server socket. The client socket receives ACK- and establishes
a connection to the first server socket. The client socket closes
its connection with the first server socket.
5. The listening socket receives the second SYN message and creates
second server socket. The second server socket sends ACK- to the
client socket, but it has been closed. It results in connection
reset error when reading from the server socket in user space.

Solution: return from function tipc_sk_push_backlog() immediately
if there is pending SYN message in the socket write queue.

Fixes: c0bceb97db9e ("tipc: add smart nagle feature")
Signed-off-by: Tung Nguyen 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: fix wrong timeout input for tipc_wait_for_cond()

2019-11-29T07:09:14+00:00

In function __tipc_shutdown(), the timeout value passed to
tipc_wait_for_cond() is not jiffies.

This commit fixes it by converting that value from milliseconds
to jiffies.

Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: fix wrong socket reference counter after tipc_sk_timeout() returns

2019-11-29T07:09:14+00:00

When tipc_sk_timeout() is executed but user space is grabbing
ownership, this function rearms itself and returns. However, the
socket reference counter is not reduced. This causes potential
unexpected behavior.

This commit fixes it by calling sock_put() before tipc_sk_timeout()
returns in the above-mentioned case.

Fixes: afe8792fec69 ("tipc: refactor function tipc_sk_timeout()")
Signed-off-by: Tung Nguyen 
Acked-by: Ying Xue 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: fix potential memory leak in __tipc_sendmsg()

2019-11-29T07:09:14+00:00

When initiating a connection message to a server side, the connection
message is cloned and added to the socket write queue. However, if the
cloning is failed, only the socket write queue is purged. It causes
memory leak because the original connection message is not freed.

This commit fixes it by purging the list of connection message when
it cannot be cloned.

Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket")
Reported-by: Hoang Le 
Signed-off-by: Tung Nguyen 
Acked-by: Ying Xue 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller