linux.git/net/tipc, branch v4.7-rc1

tipc: block BH in TCP callbacks

2016-05-19T18:36:49+00:00

TCP stack can now run from process context.

Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous
assumption.

Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1d390 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet 
Cc: Jon Maloy 
Cc: Ying Xue 
Signed-off-by: David S. Miller

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2016-05-18T00:05:30+00:00

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits)
  gitignore: fix wording
  mfd: ab8500-debugfs: fix "between" in printk
  memstick: trivial fix of spelling mistake on management
  cpupowerutils: bench: fix "average"
  treewide: Fix typos in printk
  IB/mlx4: printk fix
  pinctrl: sirf/atlas7: fix printk spelling
  serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
  w1: comment spelling s/minmum/minimum/
  Blackfin: comment spelling s/divsor/divisor/
  metag: Fix misspellings in comments.
  ia64: Fix misspellings in comments.
  hexagon: Fix misspellings in comments.
  tools/perf: Fix misspellings in comments.
  cris: Fix misspellings in comments.
  c6x: Fix misspellings in comments.
  blackfin: Fix misspelling of 'register' in comment.
  avr32: Fix misspelling of 'definitions' in comment.
  treewide: Fix typos in printk
  Doc: treewide : Fix typos in DocBook/filesystem.xml
  ...

tipc: fix nametable publication field in nl compat

2016-05-17T16:34:02+00:00

The publication field of the old netlink API should contain the
publication key and not the publication reference.

Fixes: 44a8ae94fd55 (tipc: convert legacy nl name table dump to nl compat)
Signed-off-by: Richard Alpe 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: check nl sock before parsing nested attributes

2016-05-17T01:58:54+00:00

Make sure the socket for which the user is listing publication exists
before parsing the socket netlink attributes.

Prior to this patch a call without any socket caused a NULL pointer
dereference in tipc_nl_publ_dump().

Tested-and-reported-by: Baozeng Ding 
Signed-off-by: Richard Alpe 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: eliminate risk of double link_up events

2016-05-12T21:11:27+00:00

When an ACTIVATE or data packet is received in a link in state
ESTABLISHING, the link does not immediately change state to
ESTABLISHED, but does instead return a LINK_UP event to the caller,
which will execute the state change in a different lock context.

This non-atomic approach incurs a low risk that we may have two
LINK_UP events pending simultaneously for the same link, resulting
in the final part of the setup procedure being executed twice. The
only potential harm caused by this it that we may see two LINK_UP
events issued to subsribers of the topology server, something that
may cause confusion.

This commit eliminates this risk by checking if the link is already
up before proceeding with the second half of the setup.

Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-05-04T04:52:29+00:00

Conflicts:
	net/ipv4/ip_gre.c

Minor conflicts between tunnel bug fixes in net and
ipv6 tunnel cleanups in net-next.

Signed-off-by: David S. Miller

tipc: redesign connection-level flow control

2016-05-03T19:51:16+00:00

There are two flow control mechanisms in TIPC; one at link level that
handles network congestion, burst control, and retransmission, and one
at connection level which' only remaining task is to prevent overflow
in the receiving socket buffer. In TIPC, the latter task has to be
solved end-to-end because messages can not be thrown away once they
have been accepted and delivered upwards from the link layer, i.e, we
can never permit the receive buffer to overflow.

Currently, this algorithm is message based. A counter in the receiving
socket keeps track of number of consumed messages, and sends a dedicated
acknowledge message back to the sender for each 256 consumed message.
A counter at the sending end keeps track of the sent, not yet
acknowledged messages, and blocks the sender if this number ever reaches
512 unacknowledged messages. When the missing acknowledge arrives, the
socket is then woken up for renewed transmission. This works well for
keeping the message flow running, as it almost never happens that a
sender socket is blocked this way.

A problem with the current mechanism is that it potentially is very
memory consuming. Since we don't distinguish between small and large
messages, we have to dimension the socket receive buffer according
to a worst-case of both. I.e., the window size must be chosen large
enough to sustain a reasonable throughput even for the smallest
messages, while we must still consider a scenario where all messages
are of maximum size. Hence, the current fix window size of 512 messages
and a maximum message size of 66k results in a receive buffer of 66 MB
when truesize(66k) = 131k is taken into account. It is possible to do
much better.

This commit introduces an algorithm where we instead use 1024-byte
blocks as base unit. This unit, always rounded upwards from the
actual message size, is used when we advertise windows as well as when
we count and acknowledge transmitted data. The advertised window is
based on the configured receive buffer size in such a way that even
the worst-case truesize/msgsize ratio always is covered. Since the
smallest possible message size (from a flow control viewpoint) now is
1024 bytes, we can safely assume this ratio to be less than four, which
is the value we are now using.

This way, we have been able to reduce the default receive buffer size
from 66 MB to 2 MB with maintained performance.

In order to keep this solution backwards compatible, we introduce a
new capability bit in the discovery protocol, and use this throughout
the message sending/reception path to always select the right unit.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: propagate peer node capabilities to socket layer

2016-05-03T19:51:15+00:00

During neighbor discovery, nodes advertise their capabilities as a bit
map in a dedicated 16-bit field in the discovery message header. This
bit map has so far only be stored in the node structure on the peer
nodes, but we now see the need to keep a copy even in the socket
structure.

This commit adds this functionality.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: re-enable compensation for socket receive buffer double counting

2016-05-03T19:51:14+00:00

In the refactoring commit d570d86497ee ("tipc: enqueue arrived buffers
in socket in separate function") we did by accident replace the test

if (sk->sk_backlog.len == 0)
     atomic_set(&tsk->dupl_rcvcnt, 0);

with

if (sk->sk_backlog.len)
     atomic_set(&tsk->dupl_rcvcnt, 0);

This effectively disables the compensation we have for the double
receive buffer accounting that occurs temporarily when buffers are
moved from the backlog to the socket receive queue. Until now, this
has gone unnoticed because of the large receive buffer limits we are
applying, but becomes indispensable when we reduce this buffer limit
later in this series.

We now fix this by inverting the mentioned condition.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: only process unicast on intended node

2016-05-02T01:03:30+00:00

We have observed complete lock up of broadcast-link transmission due to
unacknowledged packets never being removed from the 'transmq' queue. This
is traced to nodes having their ack field set beyond the sequence number
of packets that have actually been transmitted to them.
Consider an example where node 1 has sent 10 packets to node 2 on a
link and node 3 has sent 20 packets to node 2 on another link. We
see examples of an ack from node 2 destined for node 3 being treated as
an ack from node 2 at node 1. This leads to the ack on the node 1 to node
2 link being increased to 20 even though we have only sent 10 packets.
When node 1 does get around to sending further packets, none of the
packets with sequence numbers less than 21 are actually removed from the
transmq.
To resolve this we reinstate some code lost in commit d999297c3dbb ("tipc:
reduce locking scope during packet reception") which ensures that only
messages destined for the receiving node are processed by that node. This
prevents the sequence numbers from getting out of sync and resolves the
packet leakage, thereby resolving the broadcast-link transmission
lock-ups we observed.

While we are aware that this change only patches over a root problem that
we still haven't identified, this is a sanity test that it is always
legitimate to do. It will remain in the code even after we identify and
fix the real problem.

Reviewed-by: Chris Packham 
Reviewed-by: John Thompson 
Signed-off-by: Hamish Martin 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller