linux.git/net/sctp/ulpqueue.c, branch v5.1

sctp: add subscribe per asoc

2018-11-19T20:25:43+00:00

The member subscribe should be per asoc, so that sockopt SCTP_EVENT
in the next patch can subscribe a event from one asoc only.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: define subscribe in sctp_sock as __u16

2018-11-19T20:25:43+00:00

The member subscribe in sctp_sock is used to indicate to which of
the events it is subscribed, more like a group of flags. So it's
better to be defined as __u16 (2 bytpes), instead of struct
sctp_event_subscribe (13 bytes).

Note that sctp_event_subscribe is an UAPI struct, used on sockopt
calls, and thus it will not be removed. This patch only changes
the internal storage of the flags.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: Use skb_queue_is_first().

2018-09-10T17:06:53+00:00

Instead of direct skb_queue_head pointer accesses.

Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-12-22T16:16:31+00:00

Lots of overlapping changes.  Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.

Include a necessary change by Jakub Kicinski, with log message:

====================
cls_bpf no longer takes care of offload tracking.  Make sure
netdevsim performs necessary checks.  This fixes a warning
caused by TC trying to remove a filter it has not added.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
====================

Signed-off-by: David S. Miller

sctp: fix the issue that a __u16 variable may overflow in sctp_ulpq_renege

2017-12-18T18:21:46+00:00

Now when reneging events in sctp_ulpq_renege(), the variable freed
could be increased by a __u16 value twice while freed is of __u16
type. It means freed may overflow at the second addition.

This patch is to fix it by using __u32 type for 'freed', while at
it, also to remove 'if (chunk)' check, as all renege commands are
generated in sctp_eat_data and it can't be NULL.

Reported-by: Marcelo Ricardo Leitner 
Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add support for the process of unordered idata

2017-12-11T16:23:05+00:00

Unordered idata process is more complicated than unordered data:

 - It has to add mid into sctp_stream_out to save the next mid value,
   which is separated from ordered idata's.

 - To support pd for unordered idata, another mid and pd_mode need to
   be added to save the message id and pd state in sctp_stream_in.

 - To make  unordered idata reasm easier, it adds a new event queue
   to save frags for idata.

The patch mostly adds the samilar reasm functions for unordered idata
as ordered idata's, and also adjusts some other codes on assign_mid,
abort_pd and ulpevent_data for idata.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement abort_pd for sctp_stream_interleave

2017-12-11T16:23:05+00:00

abort_pd is added as a member of sctp_stream_interleave, used to abort
partial delivery for data or idata, called in sctp_cmd_assoc_failed.

Since stream interleave allows to do partial delivery for each stream
at the same time, sctp_intl_abort_pd for idata would be very different
from the old function sctp_ulpq_abort_pd for data.

Note that sctp_ulpevent_make_pdapi will support per stream in this
patch by adding pdapi_stream and pdapi_seq in sctp_pdapi_event, as
described in section 6.1.7 of RFC6458.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement renege_events for sctp_stream_interleave

2017-12-11T16:23:05+00:00

renege_events is added as a member of sctp_stream_interleave, used to
renege some old data or idata in reasm or lobby queue properly to free
some memory for the new data when there's memory stress.

It defines sctp_renege_events for idata, and leaves sctp_ulpq_renege
as it is for data.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement ulpevent_data for sctp_stream_interleave

2017-12-11T16:23:05+00:00

ulpevent_data is added as a member of sctp_stream_interleave, used to
do the most process in ulpq, including to convert data or idata chunk
to event, reasm them in reasm queue and put them in lobby queue in
right order, and deliver them up to user sk rx queue.

This procedure is described in section 2.2.3 of RFC8260.

It adds most functions for idata here to do the similar process as
the old functions for data. But since the details are very different
between them, the old functions can not be reused for idata.

event->ssn and event->ppid settings are moved to ulpevent_data from
sctp_ulpevent_make_rcvmsg, so that sctp_ulpevent_make_rcvmsg could
work for both data and idata.

Note that mid is added in sctp_ulpevent for idata, __packed has to
be used for defining sctp_ulpevent, or it would exceeds the skb cb
that saves a sctp_ulpevent variable for ulp layer process.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: fix missing wake ups in some situations

2017-09-08T17:02:47+00:00

Commit fb586f25300f ("sctp: delay calls to sk_data_ready() as much as
possible") minimized the number of wake ups that are triggered in case
the association receives a packet with multiple data chunks on it and/or
when io_events are enabled and then commit 0970f5b36659 ("sctp: signal
sk_data_ready earlier on data chunks reception") moved the wake up to as
soon as possible. It thus relies on the state machine running later to
clean the flag that the event was already generated.

The issue is that there are 2 call paths that calls
sctp_ulpq_tail_event() outside of the state machine, causing the flag to
linger and possibly omitting a needed wake up in the sequence.

One of the call paths is when enabling SCTP_SENDER_DRY_EVENTS via
setsockopt(SCTP_EVENTS), as noticed by Harald Welte. The other is when
partial reliability triggers removal of chunks from the send queue when
the application calls sendmsg().

This commit fixes it by not setting the flag in case the socket is not
owned by the user, as it won't be cleaned later. This works for
user-initiated calls and also for rx path processing.

Fixes: fb586f25300f ("sctp: delay calls to sk_data_ready() as much as possible")
Reported-by: Harald Welte 
Signed-off-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller