linux.git/net/sctp/sysctl.c, branch v5.19

sctp: add probe_interval in sysctl and sock/asoc/transport

2021-06-22T18:28:51+00:00

PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'.
'n' is the interval for PLPMTUD probe timer in milliseconds, and it
can't be less than 5000 if it's not 0.

All asoc/transport's PLPMTUD in a new socket will be enabled by default.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

sctp: fix the proc_handler for sysctl encap_port

2021-05-25T22:18:29+00:00

proc_dointvec() cannot do min and max check for setting a value
when extra1/extra2 is set, so change it to proc_dointvec_minmax()
for sysctl encap_port.

Fixes: e8a3001c2120 ("sctp: add encap_port for netns sock asoc and transport")
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: enable udp tunneling socks

2020-10-30T22:24:49+00:00

This patch is to enable udp tunneling socks by calling
sctp_udp_sock_start() in sctp_ctrlsock_init(), and
sctp_udp_sock_stop() in sctp_ctrlsock_exit().

Also add sysctl udp_port to allow changing the listening
sock's port by users.

Wit this patch, the whole sctp over udp feature can be
enabled and used.

v1->v2:
  - Also update ctl_sock udp_port in proc_sctp_do_udp_port()
    where netns udp_port gets changed.
v2->v3:
  - Call htons() when setting sk udp_port from netns udp_port.
v3->v4:
  - Not call sctp_udp_sock_start() when new_value is 0.
  - Add udp_port entry in ip-sysctl.rst.
v4->v5:
  - Not call sctp_udp_sock_start/stop() in sctp_ctrlsock_init/exit().
  - Improve the description of udp_port in ip-sysctl.rst.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski

sctp: add encap_port for netns sock asoc and transport

2020-10-30T22:24:06+00:00

encap_port is added as per netns/sock/assoc/transport, and the
latter one's encap_port inherits the former one's by default.
The transport's encap_port value would mostly decide if one
packet should go out with udp encapsulated or not.

This patch also allows users to set netns' encap_port by sysctl.

v1->v2:
  - Change to define encap_port as __be16 for sctp_sock, asoc and
    transport.
v2->v3:
  - No change.
v3->v4:
  - Add 'encap_port' entry in ip-sysctl.rst.
v4->v5:
  - Improve the description of encap_port in ip-sysctl.rst.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski

sysctl: pass kernel pointers to ->proc_handler

2020-04-27T06:07:40+00:00

Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from  userspace in common code.  This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.

As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.

Signed-off-by: Christoph Hellwig 
Acked-by: Andrey Ignatov 
Signed-off-by: Al Viro

sctp: add support for Primary Path Switchover

2019-11-08T22:18:32+00:00

This is a new feature defined in section 5 of rfc7829: "Primary Path
Switchover". By introducing a new tunable parameter:

  Primary.Switchover.Max.Retrans (PSMR)

The primary path will be changed to another active path when the path
error counter on the old primary path exceeds PSMR, so that "the SCTP
sender is allowed to continue data transmission on a new working path
even when the old primary destination address becomes active again".

This patch is to add this tunable parameter, 'ps_retrans' per netns,
sock, asoc and transport. It also allows a user to change ps_retrans
per netns by sysctl, and ps_retrans per sock/asoc/transport will be
initialized with it.

The check will be done in sctp_do_8_2_transport_strike() when this
feature is enabled.

Note this feature is disabled by initializing 'ps_retrans' per netns
as 0xffff by default, and its value can't be less than 'pf_retrans'
when changing by sysctl.

v3->v4:
  - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of
    sysctl 'ps_retrans'.
  - add a new entry for ps_retrans on ip-sysctl.txt.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add pf_expose per netns and sock and asoc

2019-11-08T22:18:32+00:00

As said in rfc7829, section 3, point 12:

  The SCTP stack SHOULD expose the PF state of its destination
  addresses to the ULP as well as provide the means to notify the
  ULP of state transitions of its destination addresses from
  active to PF, and vice versa.  However, it is recommended that
  an SCTP stack implementing SCTP-PF also allows for the ULP to be
  kept ignorant of the PF state of its destinations and the
  associated state transitions, thus allowing for retention of the
  simpler state transition model of [RFC4960] in the ULP.

Not only does it allow to expose the PF state to ULP, but also
allow to ignore sctp-pf to ULP.

So this patch is to add pf_expose per netns, sock and asoc. And in
sctp_assoc_control_transport(), ulp_notify will be set to false if
asoc->expose is not 'enabled' in next patch.

It also allows a user to change pf_expose per netns by sysctl, and
pf_expose per sock and asoc will be initialized with it.

Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt,
to not allow a user to query the state of a sctp-pf peer address
when pf_expose is 'disabled', as said in section 7.3.

v1->v2:
  - Fix a build warning noticed by Nathan Chancellor.
v2->v3:
  - set pf_expose to UNUSED by default to keep compatible with old
    applications.
v3->v4:
  - add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested.
  - change this patch to 1/5, and move sctp_assoc_control_transport
    change into 2/5, as Marcelo suggested.
  - use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and
    set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: allow users to set netns ecn flag with sysctl

2019-08-28T03:54:14+00:00

sysctl net.sctp.ecn_enable is added in this patch. It will allow
users to change the default sctp ecn flag, net.sctp.ecn_enable.

This feature was also required on this thread:

  http://lkml.iu.edu/hypermail/linux/kernel/0812.1/01858.html

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

proc/sysctl: add shared variables for range check

2019-07-19T00:08:07+00:00

In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range.  This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.

On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.

The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:

    $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
    248

Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.

This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:

    # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
    add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
    Data                                         old     new   delta
    sysctl_vals                                    -      12     +12
    __kstrtab_sysctl_vals                          -      12     +12
    max                                           14      10      -4
    int_max                                       16       -     -16
    one                                           68       -     -68
    zero                                         128      28    -100
    Total: Before=20583249, After=20583085, chg -0.00%

[mcroce@redhat.com: tipc: remove two unused variables]
  Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
  Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce 
Signed-off-by: Arnd Bergmann 
Acked-by: Kees Cook 
Reviewed-by: Aaron Tomlin 
Cc: Matthew Wilcox 
Cc: Stephen Rothwell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104

2019-05-24T15:39:00+00:00

Based on 1 normalized pattern(s):

  this sctp implementation is free software you can redistribute it
  and or modify it under the terms of the gnu general public license
  as published by the free software foundation either version 2 or at
  your option any later version this sctp implementation is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with gnu cc see the file copying if not see
  http www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 42 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Richard Fontana 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.683323110@linutronix.de
Signed-off-by: Greg Kroah-Hartman