linux.git/net/sched, branch v5.1

sch_cake: Make sure we can write the IP header before changing DSCP bits

2019-04-04T17:55:59+00:00

There is not actually any guarantee that the IP headers are valid before we
access the DSCP bits of the packets. Fix this using the same approach taken
in sch_dsmark.

Reported-by: Kevin Darbyshire-Bryant 
Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: David S. Miller

sch_cake: Use tc_skb_protocol() helper for getting packet protocol

2019-04-04T17:55:59+00:00

We shouldn't be using skb->protocol directly as that will miss cases with
hardware-accelerated VLAN tags. Use the helper instead to get the right
protocol number.

Reported-by: Kevin Darbyshire-Bryant 
Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: David S. Miller

net/sched: act_sample: fix divide by zero in the traffic path

2019-04-04T17:46:33+00:00

the control path of 'sample' action does not validate the value of 'rate'
provided by the user, but then it uses it as divisor in the traffic path.
Validate it in tcf_sample_init(), and return -EINVAL with a proper extack
message in case that value is zero, to fix a splat with the script below:

 # tc f a dev test0 egress matchall action sample rate 0 group 1 index 2
 # tc -s a s action sample
 total acts 1

         action order 0: sample rate 1/0 group 1 pipe
          index 2 ref 1 bind 1 installed 19 sec used 19 sec
         Action statistics:
         Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
         backlog 0b 0p requeues 0
 # ping 192.0.2.1 -I test0 -c1 -q

 divide error: 0000 [#1] SMP PTI
 CPU: 1 PID: 6192 Comm: ping Not tainted 5.1.0-rc2.diag2+ #591
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_sample_act+0x9e/0x1e0 [act_sample]
 Code: 6a f1 85 c0 74 0d 80 3d 83 1a 00 00 00 0f 84 9c 00 00 00 4d 85 e4 0f 84 85 00 00 00 e8 9b d7 9c f1 44 8b 8b e0 00 00 00 31 d2 <41> f7 f1 85 d2 75 70 f6 85 83 00 00 00 10 48 8b 45 10 8b 88 08 01
 RSP: 0018:ffffae320190ba30 EFLAGS: 00010246
 RAX: 00000000b0677d21 RBX: ffff8af1ed9ec000 RCX: 0000000059a9fe49
 RDX: 0000000000000000 RSI: 000000000c7e33b7 RDI: ffff8af23daa0af0
 RBP: ffff8af1ee11b200 R08: 0000000074fcaf7e R09: 0000000000000000
 R10: 0000000000000050 R11: ffffffffb3088680 R12: ffff8af232307f80
 R13: 0000000000000003 R14: ffff8af1ed9ec000 R15: 0000000000000000
 FS:  00007fe9c6d2f740(0000) GS:ffff8af23da80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fff6772f000 CR3: 00000000746a2004 CR4: 00000000001606e0
 Call Trace:
  tcf_action_exec+0x7c/0x1c0
  tcf_classify+0x57/0x160
  __dev_queue_xmit+0x3dc/0xd10
  ip_finish_output2+0x257/0x6d0
  ip_output+0x75/0x280
  ip_send_skb+0x15/0x40
  raw_sendmsg+0xae3/0x1410
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x60/0x210
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [...]
  Kernel panic - not syncing: Fatal exception in interrupt

Add a TDC selftest to document that 'rate' is now being validated.

Reported-by: Matteo Croce 
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Signed-off-by: Davide Caratti 
Acked-by: Yotam Gigi 
Signed-off-by: David S. Miller

net: sched: introduce and use qdisc tree flush/purge helpers

2019-04-01T21:50:13+00:00

The same code to flush qdisc tree and purge the qdisc queue
is duplicated in many places and in most cases it does not
respect NOLOCK qdisc: the global backlog len is used and the
per CPU values are ignored.

This change addresses the above, factoring-out the relevant
code and using the helpers introduced by the previous patch
to fetch the correct backlog len.

Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

net: sched: introduce and use qstats read helpers

2019-04-01T21:50:13+00:00

Classful qdiscs can't access directly the child qdiscs backlog
length: if such qdisc is NOLOCK, per CPU values should be
accounted instead.

Most qdiscs no not respect the above. As a result, qstats fetching
for most classful qdisc is currently incorrect: if the child qdisc is
NOLOCK, it always reports 0 len backlog.

This change introduces a pair of helpers to safely fetch
both backlog and qlen and use them in stats class dumping
functions, fixing the above issue and cleaning a bit the code.

DRR needs also to access the child qdisc queue length, so it
needs custom handling.

Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

net/sched: fix ->get helper of the matchall cls

2019-04-01T21:13:25+00:00

It returned always NULL, thus it was never possible to get the filter.

Example:
$ ip link add foo type dummy
$ ip link add bar type dummy
$ tc qdisc add dev foo clsact
$ tc filter add dev foo protocol all pref 1 ingress handle 1234 \
	matchall action mirred ingress mirror dev bar

Before the patch:
$ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall
Error: Specified filter handle not found.
We have an error talking to the kernel

After:
$ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall
filter ingress protocol all pref 1 matchall chain 0 handle 0x4d2
  not_in_hw
        action order 1: mirred (Ingress Mirror to device bar) pipe
        index 1 ref 1 bind 1

CC: Yotam Gigi 
CC: Jiri Pirko 
Fixes: fd62d9f5c575 ("net/sched: matchall: Fix configuration race")
Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller

net: sched: Kconfig: update reference link for PIE

2019-03-26T18:17:09+00:00

RFC 8033 replaces the IETF draft for PIE

Signed-off-by: Leslie Monis 
Signed-off-by: David S. Miller

net: sched: fix cleanup NULL pointer exception in act_mirr

2019-03-24T01:36:04+00:00

A new mirred action is created by the tcf_mirred_init function. This
contains a list head struct which is inserted into a global list on
successful creation of a new action. However, after a creation, it is
still possible to error out and call the tcf_idr_release function. This,
in turn, calls the act_mirr cleanup function via __tcf_idr_release and
__tcf_action_put. This cleanup function tries to delete the list entry
which is as yet uninitialised, leading to a NULL pointer exception.

Fix this by initialising the list entry on creation of a new action.

Bug report:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000840c73067 P4D 8000000840c73067 PUD 858dcc067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 32 PID: 5636 Comm: handler194 Tainted: G           OE     5.0.0+ #186
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.3.6 06/03/2015
RIP: 0010:tcf_mirred_release+0x42/0xa7 [act_mirred]
Code: f0 90 39 c0 e8 52 04 57 c8 48 c7 c7 b8 80 39 c0 e8 94 fa d4 c7 48 8b 93 d0 00 00 00 48 8b 83 d8 00 00 00 48 c7 c7 f0 90 39 c0 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 d0 00
RSP: 0018:ffffac4aa059f688 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9dcd1b214d00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9dcd1fa165f8 RDI: ffffffffc03990f0
RBP: ffff9dccf9c7af80 R08: 0000000000000a3b R09: 0000000000000000
R10: ffff9dccfa11f420 R11: 0000000000000000 R12: 0000000000000001
R13: ffff9dcd16b433c0 R14: ffff9dcd1b214d80 R15: 0000000000000000
FS:  00007f441bfff700(0000) GS:ffff9dcd1fa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000839e64004 CR4: 00000000001606e0
Call Trace:
tcf_action_cleanup+0x59/0xca
__tcf_action_put+0x54/0x6b
__tcf_idr_release.cold.33+0x9/0x12
tcf_mirred_init.cold.20+0x22e/0x3b0 [act_mirred]
tcf_action_init_1+0x3d0/0x4c0
tcf_action_init+0x9c/0x130
tcf_exts_validate+0xab/0xc0
fl_change+0x1ca/0x982 [cls_flower]
tc_new_tfilter+0x647/0x8d0
? load_balance+0x14b/0x9e0
rtnetlink_rcv_msg+0xe3/0x370
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1d4/0x2b0
? rtnl_calcit.isra.31+0xf0/0xf0
netlink_rcv_skb+0x49/0x110
netlink_unicast+0x16f/0x210
netlink_sendmsg+0x1df/0x390
sock_sendmsg+0x36/0x40
___sys_sendmsg+0x27b/0x2c0
? futex_wake+0x80/0x140
? do_futex+0x2b9/0xac0
? ep_scan_ready_list.constprop.22+0x1f2/0x210
? ep_poll+0x7a/0x430
__sys_sendmsg+0x47/0x80
do_syscall_64+0x55/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock")
Signed-off-by: John Hurley 
Reviewed-by: Jakub Kicinski 
Acked-by: Cong Wang 
Signed-off-by: David S. Miller

net/sched: let actions use RCU to access 'goto_chain'

2019-03-21T20:26:42+00:00

use RCU when accessing the action chain, to avoid use after free in the
traffic path when 'goto chain' is replaced on existing TC actions (see
script below). Since the control action is read in the traffic path
without holding the action spinlock, we need to explicitly ensure that
a->goto_chain is not NULL before dereferencing (i.e it's not sufficient
to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL
dereferences in tcf_action_goto_chain_exec() when the following script:

 # tc chain add dev dd0 chain 42 ingress protocol ip flower \
 > ip_proto udp action pass index 4
 # tc filter add dev dd0 ingress protocol ip flower \
 > ip_proto udp action csum udp goto chain 42 index 66
 # tc chain del dev dd0 chain 42 ingress
 (start UDP traffic towards dd0)
 # tc action replace action csum udp pass index 66

was run repeatedly for several hours.

Suggested-by: Cong Wang 
Suggested-by: Vlad Buslov 
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller

net/sched: act_vlan: validate the control action inside init()

2019-03-21T20:26:42+00:00

the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action vlan pop pass index 90
 # tc actions replace action vlan \
 > pop goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action vlan

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: vlan  pop goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00
 RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00
 R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0
 FS:  0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0
 Call Trace:
  
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? enqueue_hrtimer+0x39/0x90
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4  0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387
 RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000
 R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_vlan_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller