linux.git/net/sched/sch_api.c, branch v3.9

hlist: drop the node parameter from iterators

2013-02-28T03:10:24+00:00

I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin 
Acked-by: Paul E. McKenney 
Signed-off-by: Sasha Levin 
Cc: Wu Fengguang 
Cc: Marcelo Tosatti 
Cc: Gleb Natapov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

net: proc: change proc_net_remove to remove_proc_entry

2013-02-18T19:53:08+00:00

proc_net_remove is only used to remove proc entries
that under /proc/net,it's not a general function for
removing proc entries of netns. if we want to remove
some proc entries which under /proc/net/stat/, we still
need to call remove_proc_entry.

this patch use remove_proc_entry to replace proc_net_remove.
we can remove proc_net_remove after this patch.

Signed-off-by: Gao feng 
Signed-off-by: David S. Miller

net: proc: change proc_net_fops_create to proc_create

2013-02-18T19:53:08+00:00

Right now, some modules such as bonding use proc_create
to create proc entries under /proc/net/, and other modules
such as ipv4 use proc_net_fops_create.

It looks a little chaos.this patch changes all of
proc_net_fops_create to proc_create. we can remove
proc_net_fops_create after this patch.

Signed-off-by: Gao feng 
Signed-off-by: David S. Miller

sch_api: introduce qdisc_watchdog_schedule_ns()

2013-02-12T23:59:45+00:00

tbf will need to schedule watchdog in ns. No need to convert it twice.

Signed-off-by: Jiri Pirko 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller

pkt_sched: avoid requeues if possible

2012-12-12T05:16:47+00:00

With BQL being deployed, we can more likely have following behavior :

We dequeue a packet from qdisc in dequeue_skb(), then we realize target
tx queue is in XOFF state in sch_direct_xmit(), and we have to hold the
skb into gso_skb for later.

This shows in stats (tc -s qdisc dev eth0) as requeues.

Problem of these requeues is that high priority packets can not be
dequeued as long as this (possibly low prio and big TSO packet) is not
removed from gso_skb.

At 1Gbps speed, a full size TSO packet is 500 us of extra latency.

In some cases, we know that all packets dequeued from a qdisc are
for a particular and known txq :

- If device is non multi queue
- For all MQ/MQPRIO slave qdiscs

This patch introduces a new qdisc flag, TCQ_F_ONETXQUEUE to mark
this capability, so that dequeue_skb() is allowed to dequeue a packet
only if the associated txq is not stopped.

This indeed reduce latencies for high prio packets (or improve fairness
with sfq/fq_codel), and almost remove qdisc 'requeues'.

Signed-off-by: Eric Dumazet 
Cc: Jamal Hadi Salim 
Cc: John Fastabend 
Signed-off-by: David S. Miller

net: Push capable(CAP_NET_ADMIN) into the rtnl methods

2012-11-19T01:32:44+00:00

- In rtnetlink_rcv_msg convert the capable(CAP_NET_ADMIN) check
  to ns_capable(net->user-ns, CAP_NET_ADMIN).  Allowing unprivileged
  users to make netlink calls to modify their local network
  namespace.

- In the rtnetlink doit methods add capable(CAP_NET_ADMIN) so
  that calls that are not safe for unprivileged users are still
  protected.

Later patches will remove the extra capable calls from methods
that are safe for unprivilged users.

Acked-by: Serge Hallyn 
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: David S. Miller

pkt_sched: use ns_to_ktime() helper

2012-10-22T02:21:27+00:00

ns_to_ktime() seems better than ktime_set() + ktime_add_ns()

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

netlink: Rename pid to portid to avoid confusion

2012-09-10T19:30:41+00:00

It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" 
Acked-by: Stephen Hemminger 
Signed-off-by: David S. Miller

pkt_sched: sch_api: Move away from NLMSG_NEW().

2012-06-27T04:54:15+00:00

And use nlmsg_data() while we're here too, as well as remove
a useless cast.

Signed-off-by: David S. Miller

net: Convert net_ratelimit uses to net__ratelimited

2012-05-15T17:45:03+00:00

Standardize the net core ratelimited logging functions.

Coalesce formats, align arguments.
Change a printk then vprintk sequence to use printf extension %pV.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller