linux.git/net/rxrpc, branch v5.1

rxrpc: Fix net namespace cleanup

2019-04-30T14:50:50+00:00

In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the
->calls list is empty, emitting error messages if not, and (2) wait for the
RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0).

To avoid taking the call_lock, the function prechecks ->calls and if empty,
it returns to avoid taking the lock - this is wrong, however: it still
needs to go and do the second phase and wait for ->nr_calls to become 0.

Without this, the rxrpc_net struct may get deallocated before we get to the
RCU cleanup for the last calls.  This can lead to:

  Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384
  050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkakkkkkkk

Note the "61" at offset 0x58.  This corresponds to the ->nr_calls member of
struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k
slab).

Fix this by flipping the condition on the if-statement, putting the locked
section inside the if-body and dropping the return from there.  The
function will then always go on to wait for the RCU cleanup on outstanding
calls.

Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: fix race condition in rxrpc_input_packet()

2019-04-24T21:05:09+00:00

After commit 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook"),
rxrpc_input_packet() is directly called from lockless UDP receive
path, under rcu_read_lock() protection.

It must therefore use RCU rules :

- udp_sk->sk_user_data can be cleared at any point in this function.
  rcu_dereference_sk_user_data() is what we need here.

- Also, since sk_user_data might have been set in rxrpc_open_socket()
  we must observe a proper RCU grace period before kfree(local) in
  rxrpc_lookup_local()

v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot 
        and Julia Lawall , thanks !

v3,v2 : addressed David Howells feedback, thanks !

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573
Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4
RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001
R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000
R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001
FS:  00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0
Call Trace:
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972
 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline]
 rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414
 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011
 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085
 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245
 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301
 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482
 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208
 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987
 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099
 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202
 napi_frags_finish net/core/dev.c:5769 [inline]
 napi_gro_frags+0xade/0xd10 net/core/dev.c:5843
 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027
 call_write_iter include/linux/fs.h:1866 [inline]
 do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681
 do_iter_write fs/read_write.c:957 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:938
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002
 do_writev+0x15e/0x370 fs/read_write.c:1037
 __do_sys_writev fs/read_write.c:1110 [inline]
 __se_sys_writev fs/read_write.c:1107 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Acked-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: Fix detection of out of order acks

2019-04-12T23:57:23+00:00

The rxrpc packet serial number cannot be safely used to compute out of
order ack packets for several reasons:

 1. The allocation of serial numbers cannot be assumed to imply the order
    by which acks are populated and transmitted.  In some rxrpc
    implementations, delayed acks and ping acks are transmitted
    asynchronously to the receipt of data packets and so may be transmitted
    out of order.  As a result, they can race with idle acks.

 2. Serial numbers are allocated by the rxrpc connection and not the call
    and as such may wrap independently if multiple channels are in use.

In any case, what matters is whether the ack packet provides new
information relating to the bounds of the window (the firstPacket and
previousPacket in the ACK data).

Fix this by discarding packets that appear to wind back the window bounds
rather than on serial number procession.

Fixes: 298bc15b2079 ("rxrpc: Only take the rwind and mtu values from latest ACK")
Signed-off-by: Jeffrey Altman 
Signed-off-by: David Howells 
Tested-by: Marc Dionne 
Signed-off-by: David S. Miller

rxrpc: Trace received connection aborts

2019-04-12T23:57:23+00:00

Trace received calls that are aborted due to a connection abort, typically
because of authentication failure.  Without this, connection aborts don't
show up in the trace log.

Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: Allow errors to be returned from rxrpc_queue_packet()

2019-04-12T23:57:23+00:00

Change rxrpc_queue_packet()'s signature so that it can return any error
code it may encounter when trying to send the packet.

This allows the caller to eventually do something in case of error - though
it should be noted that the packet has been queued and a resend is
scheduled.

Signed-off-by: Marc Dionne 
Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: Make rxrpc_kernel_check_life() indicate if call completed

2019-04-12T23:57:23+00:00

Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.

Suggested-by: Marc Dionne 
Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: Clear socket error

2019-04-12T23:57:23+00:00

When an ICMP or ICMPV6 error is received, the error will be attached
to the socket (sk_err) and the report function will get called.
Clear any pending error here by calling sock_error().

This would cause the following attempt to use the socket to fail with
the error code stored by the ICMP error, resulting in unexpected errors
with various side effects depending on the context.

Signed-off-by: Marc Dionne 
Signed-off-by: David Howells 
Tested-by: Jonathan Billings 
Signed-off-by: David S. Miller

rxrpc: Check address length before reading srx_service field

2019-04-12T17:25:03+00:00

KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_rxrpc) bytes.

Signed-off-by: Tetsuo Handa 
Signed-off-by: David S. Miller

rxrpc: avoid clang -Wuninitialized warning

2019-03-24T01:48:30+00:00

clang produces a false-positive warning as it fails to notice
that "lost = true" implies that "ret" is initialized:

net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (lost)
            ^~~~
net/rxrpc/output.c:437:6: note: uninitialized use occurs here
        if (ret >= 0) {
            ^~~
net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false
        if (lost)
        ^~~~~~~~~
net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning
        int ret, opt;
               ^
                = 0

Rearrange the code to make that more obvious and avoid the warning.

Signed-off-by: Arnd Bergmann 
Reviewed-by: Nathan Chancellor 
Signed-off-by: David S. Miller

rxrpc: Fix client call queueing, waiting for channel

2019-03-09T02:24:53+00:00

rxrpc_get_client_conn() adds a new call to the front of the waiting_calls
queue if the connection it's going to use already exists.  This is bad as
it allows calls to get starved out.

Fix this by adding to the tail instead.

Also change the other enqueue point in the same function to put it on the
front (ie. when we have a new connection).  This makes the point that in
the case of a new connection the new call goes at the front (though it
doesn't actually matter since the queue should be unoccupied).

Fixes: 45025bceef17 ("rxrpc: Improve management and caching of client connection objects")
Signed-off-by: David Howells 
Reviewed-by: Marc Dionne 
Signed-off-by: David S. Miller