linux.git/net/rxrpc/sendmsg.c, branch v4.12

rxrpc: Trace protocol errors in received packets

2017-04-06T10:09:39+00:00

Add a tracepoint (rxrpc_rx_proto) to record protocol errors in received
packets.  The following changes are made:

 (1) Add a function, __rxrpc_abort_eproto(), to note a protocol error on a
     call and mark the call aborted.  This is wrapped by
     rxrpc_abort_eproto() that makes the why string usable in trace.

 (2) Add trace_rxrpc_rx_proto() or rxrpc_abort_eproto() to protocol error
     generation points, replacing rxrpc_abort_call() with the latter.

 (3) Only send an abort packet in rxkad_verify_packet*() if we actually
     managed to abort the call.

Note that a trace event is also emitted if a kernel user (e.g. afs) tries
to send data through a call when it's not in the transmission phase, though
it's not technically a receive event.

Signed-off-by: David Howells

rxrpc: Note a successfully aborted kernel operation

2017-04-06T09:11:59+00:00

Make rxrpc_kernel_abort_call() return an indication as to whether it
actually aborted the operation or not so that kafs can trace the failure of
the operation.  Note that 'success' in this context means changing the
state of the call, not necessarily successfully transmitting an ABORT
packet.

Signed-off-by: David Howells

rxrpc: Use negative error codes in rxrpc_call struct

2017-04-06T09:11:56+00:00

Use negative error codes in struct rxrpc_call::error because that's what
the kernel normally deals with and to make the code consistent.  We only
turn them positive when transcribing into a cmsg for userspace recvmsg.

Signed-off-by: David Howells

rxrpc: rxrpc_kernel_send_data() needs to handle failed call better

2017-03-10T02:30:10+00:00

If rxrpc_kernel_send_data() is asked to send data through a call that has
already failed (due to a remote abort, received protocol error or network
error), then return the associated error code saved in the call rather than
ESHUTDOWN.

This allows the caller to work out whether to ask for the abort code or not
based on this.

Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: Call state should be read with READ_ONCE() under some circumstances

2017-03-07T21:59:06+00:00

The call state may be changed at any time by the data-ready routine in
response to received packets, so if the call state is to be read and acted
upon several times in a function, READ_ONCE() must be used unless the call
state lock is held.

Signed-off-by: David Howells 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-03-05T01:31:39+00:00

Pull networking fixes from David Miller:

 1) Fix double-free in batman-adv, from Sven Eckelmann.

 2) Fix packet stats for fast-RX path, from Joannes Berg.

 3) Netfilter's ip_route_me_harder() doesn't handle request sockets
    properly, fix from Florian Westphal.

 4) Fix sendmsg deadlock in rxrpc, from David Howells.

 5) Add missing RCU locking to transport hashtable scan, from Xin Long.

 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.

 7) Fix race in NAPI handling between poll handlers and busy polling,
    from Eric Dumazet.

 8) TX path in vxlan and geneve need proper RCU locking, from Jakub
    Kicinski.

 9) SYN processing in DCCP and TCP need to disable BH, from Eric
    Dumazet.

10) Properly handle net_enable_timestamp() being invoked from IRQ
    context, also from Eric Dumazet.

11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.

12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
    Melo.

13) Fix use-after-free in netvsc driver, from Dexuan Cui.

14) Fix max MTU setting in bonding driver, from WANG Cong.

15) xen-netback hash table can be allocated from softirq context, so use
    GFP_ATOMIC. From Anoob Soman.

16) Fix MAC address change bug in bgmac driver, from Hari Vyas.

17) strparser needs to destroy strp_wq on module exit, from WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  strparser: destroy workqueue on module exit
  sfc: fix IPID endianness in TSOv2
  sfc: avoid max() in array size
  rds: remove unnecessary returned value check
  rxrpc: Fix potential NULL-pointer exception
  nfp: correct DMA direction in XDP DMA sync
  nfp: don't tell FW about the reserved buffer space
  net: ethernet: bgmac: mac address change bug
  net: ethernet: bgmac: init sequence bug
  xen-netback: don't vfree() queues under spinlock
  xen-netback: keep a local pointer for vif in backend_disconnect()
  netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
  netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
  netfilter: nf_conntrack_sip: fix wrong memory initialisation
  can: flexcan: fix typo in comment
  can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
  can: gs_usb: fix coding style
  can: gs_usb: Don't use stack memory for USB transfers
  ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
  ixgbe: update the rss key on h/w, when ethtool ask for it
  ...

rxrpc: Fix potential NULL-pointer exception

2017-03-03T17:48:00+00:00

Fix a potential NULL-pointer exception in rxrpc_do_sendmsg().  The call
state check that I added should have gone into the else-body of the
if-statement where we actually have a call to check.

Found by CoverityScan CID#1414316 ("Dereference after null check").

Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Colin Ian King 
Signed-off-by: David Howells 
Signed-off-by: David S. Miller

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32+00:00

Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

rxrpc: Fix deadlock between call creation and sendmsg/recvmsg

2017-03-01T17:50:58+00:00

All the routines by which rxrpc is accessed from the outside are serialised
by means of the socket lock (sendmsg, recvmsg, bind,
rxrpc_kernel_begin_call(), ...) and this presents a problem:

 (1) If a number of calls on the same socket are in the process of
     connection to the same peer, a maximum of four concurrent live calls
     are permitted before further calls need to wait for a slot.

 (2) If a call is waiting for a slot, it is deep inside sendmsg() or
     rxrpc_kernel_begin_call() and the entry function is holding the socket
     lock.

 (3) sendmsg() and recvmsg() or the in-kernel equivalents are prevented
     from servicing the other calls as they need to take the socket lock to
     do so.

 (4) The socket is stuck until a call is aborted and makes its slot
     available to the waiter.

Fix this by:

 (1) Provide each call with a mutex ('user_mutex') that arbitrates access
     by the users of rxrpc separately for each specific call.

 (2) Make rxrpc_sendmsg() and rxrpc_recvmsg() unlock the socket as soon as
     they've got a call and taken its mutex.

     Note that I'm returning EWOULDBLOCK from recvmsg() if MSG_DONTWAIT is
     set but someone else has the lock.  Should I instead only return
     EWOULDBLOCK if there's nothing currently to be done on a socket, and
     sleep in this particular instance because there is something to be
     done, but we appear to be blocked by the interrupt handler doing its
     ping?

 (3) Make rxrpc_new_client_call() unlock the socket after allocating a new
     call, locking its user mutex and adding it to the socket's call tree.
     The call is returned locked so that sendmsg() can add data to it
     immediately.

     From the moment the call is in the socket tree, it is subject to
     access by sendmsg() and recvmsg() - even if it isn't connected yet.

 (4) Lock new service calls in the UDP data_ready handler (in
     rxrpc_new_incoming_call()) because they may already be in the socket's
     tree and the data_ready handler makes them live immediately if a user
     ID has already been preassigned.

     Note that the new call is locked before any notifications are sent
     that it is live, so doing mutex_trylock() *ought* to always succeed.
     Userspace is prevented from doing sendmsg() on calls that are in a
     too-early state in rxrpc_do_sendmsg().

 (5) Make rxrpc_new_incoming_call() return the call with the user mutex
     held so that a ping can be scheduled immediately under it.

     Note that it might be worth moving the ping call into
     rxrpc_new_incoming_call() and then we can drop the mutex there.

 (6) Make rxrpc_accept_call() take the lock on the call it is accepting and
     release the socket after adding the call to the socket's tree.  This
     is slightly tricky as we've dequeued the call by that point and have
     to requeue it.

     Note that requeuing emits a trace event.

 (7) Make rxrpc_kernel_send_data() and rxrpc_kernel_recv_data() take the
     new mutex immediately and don't bother with the socket mutex at all.

This patch has the nice bonus that calls on the same socket are now to some
extent parallelisable.

Note that we might want to move rxrpc_service_prealloc() calls out from the
socket lock and give it its own lock, so that we don't hang progress in
other calls because we're waiting for the allocator.

We probably also want to avoid calling rxrpc_notify_socket() from within
the socket lock (rxrpc_accept_call()).

Signed-off-by: David Howells 
Tested-by: Marc Dionne 
Signed-off-by: David S. Miller

scm: remove use CMSG{_COMPAT}_ALIGN(sizeof(struct {compat_}cmsghdr))

2017-01-04T18:04:37+00:00

sizeof(struct cmsghdr) and sizeof(struct compat_cmsghdr) already aligned.
remove use CMSG_ALIGN(sizeof(struct cmsghdr)) and
CMSG_COMPAT_ALIGN(sizeof(struct compat_cmsghdr)) keep code consistent.

Signed-off-by: yuan linyu 
Signed-off-by: David S. Miller