linux.git/net/rds/send.c, branch v4.12

RDS: make message size limit compliant with spec

2017-01-02T22:02:57+00:00

RDS support max message size as 1M but the code doesn't check this
in all cases. Patch fixes it for RDMA & non-RDMA and RDS MR size
and its enforced irrespective of underlying transport.

Signed-off-by: Avinash Repaka 
Signed-off-by: Santosh Shilimkar

RDS: RDMA: Fix the composite message user notification

2017-01-02T22:02:54+00:00

When application sends an RDS RDMA composite message consist of
RDMA transfer to be followed up by non RDMA payload, it expect to
be notified *only* when the full message gets delivered. RDS RDMA
notification doesn't behave this way though.

Thanks to Venkat for debug and root casuing the issue
where only first part of the message(RDMA) was
successfully delivered but remainder payload delivery failed.
In that case, application should not be notified with
a false positive of message delivery success.

Fix this case by making sure the user gets notified only after
the full message delivery.

Reviewed-by: Venkat Venkatsubra 
Signed-off-by: Santosh Shilimkar

RDS: RDMA: return appropriate error on rdma map failures

2017-01-02T22:02:46+00:00

The first message to a remote node should prompt a new
connection even if it is RDMA operation. For RDMA operation
the MR mapping can fail because connections is not yet up.

Since the connection establishment is asynchronous,
we make sure the map failure because of unavailable
connection reach to the user by appropriate error code.
Before returning to the user, lets trigger the connection
so that its ready for the next retry.

Signed-off-by: Santosh Shilimkar

RDS: mark few internal functions static to make sparse build happy

2017-01-02T22:02:40+00:00

Fixes below warnings:
warning: symbol 'rds_send_probe' was not declared. Should it be static?
warning: symbol 'rds_send_ping' was not declared. Should it be static?
warning: symbol 'rds_tcp_accept_one_path' was not declared. Should it be static?
warning: symbol 'rds_walk_conn_path_info' was not declared. Should it be static?

Signed-off-by: Santosh Shilimkar

RDS: TCP: Track peer's connection generation number

2016-11-17T18:35:18+00:00

The RDS transport has to be able to distinguish between
two types of failure events:
(a) when the transport fails (e.g., TCP connection reset)
    but the RDS socket/connection layer on both sides stays
    the same
(b) when the peer's RDS layer itself resets (e.g., due to module
    reload or machine reboot at the peer)
In case (a) both sides must reconnect and continue the RDS messaging
without any message loss or disruption to the message sequence numbers,
and this is achieved by rds_send_path_reset().

In case (b) we should reset all rds_connection state to the
new incarnation of the peer. Examples of state that needs to
be reset are next expected rx sequence number from, or messages to be
retransmitted to, the new incarnation of the peer.

To achieve this, the RDS handshake probe added as part of
commit 5916e2c1554f ("RDS: TCP: Enable multipath RDS for TCP")
is enhanced so that sender and receiver of the RDS ping-probe
will add a generation number as part of the RDS_EXTHDR_GEN_NUM
extension header. Each peer stores local and remote generation
numbers as part of each rds_connection. Changes in generation
number will be detected via incoming handshake probe ping
request or response and will allow the receiver to reset rds_connection
state.

Signed-off-by: Sowmini Varadhan 
Acked-by: Santosh Shilimkar 
Signed-off-by: David S. Miller

RDS: TCP: Enable multipath RDS for TCP

2016-07-15T18:36:58+00:00

Use RDS probe-ping to compute how many paths may be used with
the peer, and to synchronously start the multiple paths. If mprds is
supported, hash outgoing traffic to one of multiple paths in rds_sendmsg()
when multipath RDS is supported by the transport.

CC: Santosh Shilimkar 
Signed-off-by: Sowmini Varadhan 
Acked-by: Santosh Shilimkar 
Signed-off-by: David S. Miller

RDS: Rework path specific indirections

2016-07-01T20:45:17+00:00

Refactor code to avoid separate indirections for single-path
and multipath transports. All transports (both single and mp-capable)
will get a pointer to the rds_conn_path, and can trivially derive
the rds_connection from the ->cp_conn.

Acked-by: Santosh Shilimkar 
Signed-off-by: Sowmini Varadhan 
Signed-off-by: David S. Miller

RDS: Update rds_conn_shutdown to work with rds_conn_path

2016-06-15T06:50:44+00:00

This commit changes rds_conn_shutdown to take a rds_conn_path *
argument, allowing it to shutdown paths other than c_path[0] for
MP-capable transports.

Signed-off-by: Sowmini Varadhan 
Signed-off-by: David S. Miller

RDS: Add rds_conn_path_connect_if_down() for MP-aware callers

2016-06-15T06:50:43+00:00

rds_conn_path_connect_if_down() works on the rds_conn_path
that it is passed. Callers who are not t_m_capable may continue
calling rds_conn_connect_if_down, which will invoke
rds_conn_path_connect_if_down() with the default c_path[0].

Signed-off-by: Sowmini Varadhan 
Signed-off-by: David S. Miller

RDS: Make rds_send_pong() take a rds_conn_path argument

2016-06-15T06:50:43+00:00

This commit allows rds_send_pong() callers to send back
the rds pong message on some path other than c_path[0] by
passing in a struct rds_conn_path * argument.  It also
removes the last dependency on the #defines in rds_single.h
from send.c

Signed-off-by: Sowmini Varadhan 
Signed-off-by: David S. Miller