linux.git/net/openvswitch/flow_netlink.c, branch v5.19

openvswitch: fix OOB access in reserve_sfa_size()

2022-04-15T10:50:02+00:00

Given a sufficiently large number of actions, while copying and
reserving memory for a new action of a new flow, if next_offset is
greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does
not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE
bytes increasing actions_len by req_size. This can then lead to an OOB
write access, especially when further actions need to be copied.

Fix it by rearranging the flow action size check.

KASAN splat below:

==================================================================
BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch]
Write of size 65360 at addr ffff888147e4001c by task handler15/836

CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27
...
Call Trace:
 
 dump_stack_lvl+0x45/0x5a
 print_report.cold+0x5e/0x5db
 ? __lock_text_start+0x8/0x8
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_report+0xb5/0x130
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_check_range+0xf5/0x1d0
 memcpy+0x39/0x60
 reserve_sfa_size+0x1ba/0x380 [openvswitch]
 __add_action+0x24/0x120 [openvswitch]
 ovs_nla_add_action+0xe/0x20 [openvswitch]
 ovs_ct_copy_action+0x29d/0x1130 [openvswitch]
 ? __kernel_text_address+0xe/0x30
 ? unwind_get_return_address+0x56/0xa0
 ? create_prof_cpu_mask+0x20/0x20
 ? ovs_ct_verify+0xf0/0xf0 [openvswitch]
 ? prep_compound_page+0x198/0x2a0
 ? __kasan_check_byte+0x10/0x40
 ? kasan_unpoison+0x40/0x70
 ? ksize+0x44/0x60
 ? reserve_sfa_size+0x75/0x380 [openvswitch]
 __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch]
 ? __zone_watermark_ok+0x420/0x420
 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch]
 ? __alloc_pages+0x1a9/0x3e0
 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0
 ? unwind_next_frame+0x991/0x1e40
 ? __mod_node_page_state+0x99/0x120
 ? __mod_lruvec_page_state+0x2e3/0x470
 ? __kasan_kmalloc_large+0x90/0xe0
 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch]
 ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch]
 ...

Cc: stable@vger.kernel.org
Fixes: f28cd2af22a0 ("openvswitch: fix flow actions reallocation")
Signed-off-by: Paolo Valerio 
Acked-by: Eelco Chaudron 
Signed-off-by: David S. Miller

net: openvswitch: fix leak of nested actions

2022-04-06T12:36:50+00:00

While parsing user-provided actions, openvswitch module may dynamically
allocate memory and store pointers in the internal copy of the actions.
So this memory has to be freed while destroying the actions.

Currently there are only two such actions: ct() and set().  However,
there are many actions that can hold nested lists of actions and
ovs_nla_free_flow_actions() just jumps over them leaking the memory.

For example, removal of the flow with the following actions will lead
to a leak of the memory allocated by nf_ct_tmpl_alloc():

  actions:clone(ct(commit),0)

Non-freed set() action may also leak the 'dst' structure for the
tunnel info including device references.

Under certain conditions with a high rate of flow rotation that may
cause significant memory leak problem (2MB per second in reporter's
case).  The problem is also hard to mitigate, because the user doesn't
have direct control over the datapath flows generated by OVS.

Fix that by iterating over all the nested actions and freeing
everything that needs to be freed recursively.

New build time assertion should protect us from this problem if new
actions will be added in the future.

Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all
attributes has to be explicitly checked.  sample() and clone() actions
are mixing extra attributes into the user-provided action list.  That
prevents some code generalization too.

Fixes: 34ae932a4036 ("openvswitch: Make tunnel set action attach a metadata dst")
Link: https://mail.openvswitch.org/pipermail/ovs-dev/2022-March/392922.html
Reported-by: Stéphane Graber 
Signed-off-by: Ilya Maximets 
Acked-by: Aaron Conole 
Signed-off-by: David S. Miller

net: openvswitch: don't send internal clone attribute to the userspace.

2022-04-06T00:57:54+00:00

'OVS_CLONE_ATTR_EXEC' is an internal attribute that is used for
performance optimization inside the kernel.  It's added by the kernel
while parsing user-provided actions and should not be sent during the
flow dump as it's not part of the uAPI.

The issue doesn't cause any significant problems to the ovs-vswitchd
process, because reported actions are not really used in the
application lifecycle and only supposed to be shown to a human via
ovs-dpctl flow dump.  However, the action list is still incorrect
and causes the following error if the user wants to look at the
datapath flows:

  # ovs-dpctl add-dp system@ovs-system
  # ovs-dpctl add-flow "" "clone(ct(commit),0)"
  # ovs-dpctl dump-flows
  , packets:0, bytes:0, used:never,
    actions:clone(bad length 4, expected -1 for: action0(01 00 00 00),
                  ct(commit),0)

With the fix:

  # ovs-dpctl dump-flows
  , packets:0, bytes:0, used:never,
    actions:clone(ct(commit),0)

Additionally fixed an incorrect attribute name in the comment.

Fixes: b233504033db ("openvswitch: kernel datapath clone action")
Signed-off-by: Ilya Maximets 
Acked-by: Aaron Conole 
Link: https://lore.kernel.org/r/20220404104150.2865736-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski

openvswitch: Fixed nd target mask field in the flow dump.

2022-03-29T07:47:41+00:00

IPv6 nd target mask was not getting populated in flow dump.

In the function __ovs_nla_put_key the icmp code mask field was checked
instead of icmp code key field to classify the flow as neighbour discovery.

ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0),
skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0),
ct_zone(0/0),ct_mark(0/0),ct_label(0/0),
eth(src=00:00:00:00:00:00/00:00:00:00:00:00,
dst=00:00:00:00:00:00/00:00:00:00:00:00),
eth_type(0x86dd),
ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no),
icmpv6(type=135,code=0),
nd(target=2001::2/::,
sll=00:00:00:00:00:00/00:00:00:00:00:00,
tll=00:00:00:00:00:00/00:00:00:00:00:00),
packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2

Fixes: e64457191a25 (openvswitch: Restructure datapath.c and flow.c)
Signed-off-by: Martin Varghese 
Link: https://lore.kernel.org/r/20220328054148.3057-1-martinvarghesenokia@gmail.com
Signed-off-by: Paolo Abeni

net: openvswitch: fix uAPI incompatibility with existing user space

2022-03-11T04:14:52+00:00

Few years ago OVS user space made a strange choice in the commit [1]
to define types only valid for the user space inside the copy of a
kernel uAPI header.  '#ifndef __KERNEL__' and another attribute was
added later.

This leads to the inevitable clash between user space and kernel types
when the kernel uAPI is extended.  The issue was unveiled with the
addition of a new type for IPv6 extension header in kernel uAPI.

When kernel provides the OVS_KEY_ATTR_IPV6_EXTHDRS attribute to the
older user space application, application tries to parse it as
OVS_KEY_ATTR_PACKET_TYPE and discards the whole netlink message as
malformed.  Since OVS_KEY_ATTR_IPV6_EXTHDRS is supplied along with
every IPv6 packet that goes to the user space, IPv6 support is fully
broken.

Fixing that by bringing these user space attributes to the kernel
uAPI to avoid the clash.  Strictly speaking this is not the problem
of the kernel uAPI, but changing it is the only way to avoid breakage
of the older user space applications at this point.

These 2 types are explicitly rejected now since they should not be
passed to the kernel.  Additionally, OVS_KEY_ATTR_TUNNEL_INFO moved
out from the '#ifdef __KERNEL__' as there is no good reason to hide
it from the userspace.  And it's also explicitly rejected now, because
it's for in-kernel use only.

Comments with warnings were added to avoid the problem coming back.

(1 << type) converted to (1ULL << type) to avoid integer overflow on
OVS_KEY_ATTR_IPV6_EXTHDRS, since it equals 32 now.

 [1] beb75a40fdc2 ("userspace: Switching of L3 packets in L2 pipeline")

Fixes: 28a3f0601727 ("net: openvswitch: IPv6: Add IPv6 extension header support")
Link: https://lore.kernel.org/netdev/3adf00c7-fe65-3ef4-b6d7-6d8a0cad8a5f@nvidia.com
Link: https://github.com/openvswitch/ovs/commit/beb75a40fdc295bfd6521b0068b4cd12f6de507c
Reported-by: Roi Dayan 
Signed-off-by: Ilya Maximets 
Acked-by: Nicolas Dichtel 
Acked-by: Aaron Conole 
Link: https://lore.kernel.org/r/20220309222033.3018976-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski

net: openvswitch: IPv6: Add IPv6 extension header support

2022-02-25T10:32:55+00:00

This change adds a new OpenFlow field OFPXMT_OFB_IPV6_EXTHDR and
packets can be filtered using ipv6_ext flag.

Signed-off-by: Toms Atteka 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller

net: openvswitch: add log message for error case

2021-01-15T00:32:14+00:00

As requested by upstream OVS, added some error messages in the
validate_and_copy_dec_ttl function.

Includes a small cleanup, which removes an unnecessary parameter
from the dec_ttl_exception_handler() function.

Reported-by: Flavio Leitner 
Signed-off-by: Eelco Chaudron 
Acked-by: Flavio Leitner 
Link: https://lore.kernel.org/r/161054576573.26637.18396634650212670580.stgit@ebuild
Signed-off-by: Jakub Kicinski

openvswitch: fix error return code in validate_and_copy_dec_ttl()

2020-12-04T23:43:14+00:00

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Changing 'return start' to 'return action_start' can fix this bug.

Fixes: 69929d4c49e1 ("net: openvswitch: fix TTL decrement action netlink message format")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Reviewed-by: Eelco Chaudron 
Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski

net: openvswitch: fix TTL decrement action netlink message format

2020-11-27T19:03:06+00:00

Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.

When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.

Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.

Fixes: 744676e77720 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron 
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski

net: openvswitch: kerneldoc fixes

2020-07-14T00:20:40+00:00

Simple fixes which require no deep knowledge of the code.

Cc: Pravin B Shelar 
Signed-off-by: Andrew Lunn 
Signed-off-by: David S. Miller