linux.git/net/openvswitch/flow_netlink.c, branch v5.0

openvswitch: Avoid OOB read when parsing flow nlattrs

2019-01-16T21:35:21+00:00

For nested and variable attributes, the expected length of an attribute
is not known and marked by a negative number.  This results in an OOB
read when the expected length is later used to check if the attribute is
all zeros. Fix this by using the actual length of the attribute rather
than the expected length.

Signed-off-by: Ross Lagerwall 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller

OVS: remove use of VLAN_TAG_PRESENT

2018-11-09T03:49:31+00:00

This is a minimal change to allow removing of VLAN_TAG_PRESENT.
It leaves OVS unable to use CFI bit, as fixing this would need
a deeper surgery involving userspace interface.

Signed-off-by: Michał Mirosław 
Signed-off-by: David S. Miller

openvswitch: Fix push/pop ethernet validation

2018-11-01T01:37:16+00:00

When there are both pop and push ethernet header actions among the
actions to be applied to a packet, an unexpected EINVAL (Invalid
argument) error is obtained. This is due to mac_proto not being reset
correctly when those actions are validated.

Reported-at:
https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html
Fixes: 91820da6ae85 ("openvswitch: add Ethernet push and pop actions")
Signed-off-by: Jaime Caamaño Ruiz 
Tested-by: Greg Rose 
Reviewed-by: Greg Rose 
Signed-off-by: David S. Miller

openvswitch: kernel datapath clone action

2018-07-08T02:13:25+00:00

Add 'clone' action to kernel datapath by using existing functions.
When actions within clone don't modify the current flow, the flow
key is not cloned before executing clone actions.

This is a follow up patch for this incomplete work:
https://patchwork.ozlabs.org/patch/722096/

v1 -> v2:
Refactor as advised by reviewer.

Signed-off-by: Yifeng Sun 
Signed-off-by: Andy Zhou 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller

net: check tunnel option type in tunnel flags

2018-06-29T14:50:26+00:00

Check the tunnel option type stored in tunnel flags when creating options
for tunnels. Thereby ensuring we do not set geneve, vxlan or erspan tunnel
options on interfaces that are not associated with them.

Make sure all users of the infrastructure set correct flags, for the BPF
helper we have to set all bits to keep backward compatibility.

Signed-off-by: Pieter Jansen van Vuuren 
Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

openvswitch: Don't swap table in nlattr_set() after OVS_ATTR_NESTED is found

2018-05-04T16:51:02+00:00

If an OVS_ATTR_NESTED attribute type is found while walking
through netlink attributes, we call nlattr_set() recursively
passing the length table for the following nested attributes, if
different from the current one.

However, once we're done with those sub-nested attributes, we
should continue walking through attributes using the current
table, instead of using the one related to the sub-nested
attributes.

For example, given this sequence:

1  OVS_KEY_ATTR_PRIORITY
2  OVS_KEY_ATTR_TUNNEL
3	OVS_TUNNEL_KEY_ATTR_ID
4	OVS_TUNNEL_KEY_ATTR_IPV4_SRC
5	OVS_TUNNEL_KEY_ATTR_IPV4_DST
6	OVS_TUNNEL_KEY_ATTR_TTL
7	OVS_TUNNEL_KEY_ATTR_TP_SRC
8	OVS_TUNNEL_KEY_ATTR_TP_DST
9  OVS_KEY_ATTR_IN_PORT
10 OVS_KEY_ATTR_SKB_MARK
11 OVS_KEY_ATTR_MPLS

we switch to the 'ovs_tunnel_key_lens' table on attribute #3,
and we don't switch back to 'ovs_key_lens' while setting
attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS
evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is
15, we also get this kind of KASan splat while accessing the
wrong table:

[ 7654.586496] ==================================================================
[ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430
[ 7654.610983]
[ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1
[ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
[ 7654.631379] Call Trace:
[ 7654.634108]  [] dump_stack+0x19/0x1b
[ 7654.639843]  [] print_address_description+0x33/0x290
[ 7654.647129]  [] ? nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.654607]  [] kasan_report.part.3+0x242/0x330
[ 7654.661406]  [] __asan_report_load4_noabort+0x34/0x40
[ 7654.668789]  [] nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.676076]  [] ovs_nla_get_match+0x10c8/0x1900 [openvswitch]
[ 7654.684234]  [] ? genl_rcv+0x28/0x40
[ 7654.689968]  [] ? netlink_unicast+0x3f3/0x590
[ 7654.696574]  [] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch]
[ 7654.705122]  [] ? unwind_get_return_address+0xb0/0xb0
[ 7654.712503]  [] ? system_call_fastpath+0x1c/0x21
[ 7654.719401]  [] ? update_stack_state+0x229/0x370
[ 7654.726298]  [] ? update_stack_state+0x229/0x370
[ 7654.733195]  [] ? kasan_unpoison_shadow+0x35/0x50
[ 7654.740187]  [] ? kasan_kmalloc+0xaa/0xe0
[ 7654.746406]  [] ? kasan_slab_alloc+0x12/0x20
[ 7654.752914]  [] ? memset+0x31/0x40
[ 7654.758456]  [] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch]

[snip]

[ 7655.132484] The buggy address belongs to the variable:
[ 7655.138226]  ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch]
[ 7655.145507]
[ 7655.147166] Memory state around the buggy address:
[ 7655.152514]  ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa
[ 7655.160585]  ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa
[ 7655.176701]                                                              ^
[ 7655.184372]  ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05
[ 7655.192431]  ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.200490] ==================================================================

Reported-by: Hangbin Liu 
Fixes: 982b52700482 ("openvswitch: Fix mask generation for nested attributes.")
Signed-off-by: Stefano Brivio 
Reviewed-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

openvswitch: add erspan version I and II support

2018-01-26T02:39:43+00:00

The patch adds support for openvswitch to configure erspan
v1 and v2.  The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added
to uapi as a binary blob to support all ERSPAN v1 and v2's
fields.  Note that Previous commit "openvswitch: Add erspan tunnel
support." was reverted since it does not design properly.

Signed-off-by: William Tu 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller

flow_netlink: Remove unneeded semicolons

2018-01-18T21:25:01+00:00

Trivial fix removes unneeded semicolons after if blocks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Christopher Díaz Riveros 
Signed-off-by: David S. Miller

Revert "openvswitch: Add erspan tunnel support."

2018-01-15T19:33:16+00:00

This reverts commit ceaa001a170e43608854d5290a48064f57b565ed.

The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr should be designed
as a nested attribute to support all ERSPAN v1 and v2's fields.
The current attr is a be32 supporting only one field.  Thus, this
patch reverts it and later patch will redo it using nested attr.

Signed-off-by: William Tu 
Cc: Jiri Benc 
Cc: Pravin Shelar 
Acked-by: Jiri Benc 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller

openvswitch: fix the incorrect flow action alloc size

2017-11-26T23:34:59+00:00

If we want to add a datapath flow, which has more than 500 vxlan outputs'
action, we will get the following error reports:
  openvswitch: netlink: Flow action size 32832 bytes exceeds max
  openvswitch: netlink: Flow action size 32832 bytes exceeds max
  openvswitch: netlink: Actions may not be safe on all matching packets
  ... ...

It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but
this is not the root cause. For example, for a vxlan output action, we need
about 60 bytes for the nlattr, but after it is converted to the flow
action, it only occupies 24 bytes. This means that we can still support
more than 1000 vxlan output actions for a single datapath flow under the
the current 32k max limitation.

So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we
shouldn't report EINVAL and keep it move on, as the judgement can be
done by the reserve_sfa_size.

Signed-off-by: zhangliping 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller