commit 174e23810cd31
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions.  The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.

Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.

This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().

In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.

I am submitting this for "net", because we're still early in the release
cycle.  The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next:

1) Rename mss field to mss_option field in synproxy, from Fernando Mancera.

2) Use SYSCTL_{ZERO,ONE} definitions in conntrack, from Matteo Croce.

3) More strict validation of IPVS sysctl values, from Junwei Hu.

4) Remove unnecessary spaces after on the right hand side of assignments,
   from yangxingwu.

5) Add offload support for bitwise operation.

6) Extend the nft_offload_reg structure to store immediate date.

7) Collapse several ip_set header files into ip_set.h, from
   Jeremy Sowden.

8) Make netfilter headers compile with CONFIG_KERNEL_HEADER_TEST=y,
   from Jeremy Sowden.

9) Fix several sparse warnings due to missing prototypes, from
   Valdis Kletnieks.

10) Use static lock initialiser to ensure connlabel spinlock is
    initialized on boot time to fix sched/act_ct.c, patch
    from Florian Westphal.
====================

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

This patch removes extra spaces.

Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Delete long obsoleted "register" keyword.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ipvs module parse the user buffer and save it to sysctl,
then check if the value is valid. invalid value occurs
over a period of time.
Here, I add a variable, struct ctl_table tmp, used to read
the value from the user buffer, and save only when it is valid.
I delete proc_do_sync_mode and use extra1/2 in table for the
proc_dointvec_minmax call.

Fixes: f73181c8288f ("ipvs: add support for sync threads")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix a deadlock when module is requested via netlink_bind()
   in nfnetlink, from Florian Westphal.

2) Fix ipt_rpfilter and ip6t_rpfilter with VRF, from Miaohe Lin.

3) Skip master comparison in SIP helper to fix expectation clash
   under two valid scenarios, from xiao ruizhu.

4) Remove obsolete comments in nf_conntrack codebase, from
   Yonatan Goldschmidt.

5) Fix redirect extension module autoload, from Christian Hesse.

6) Fix incorrect mssg option sent to client in synproxy,
   from Fernando Fernandez.

7) Fix incorrect window calculations in TCP conntrack, from
   Florian Westphal.

8) Don't bail out when updating basechain policy due to recent
   offload works, also from Florian.

9) Allow symhash to use modulus 1 as other hash extensions do,
   from Laura.Garcia.

10) Missing NAT chain module autoload for the inet family,
    from Phil Sutter.

11) Fix missing adjustment of TCP RST packet in synproxy,
    from Fernando Fernandez.

12) Skip EAGAIN path when nft_meta_bridge is built-in or
    not selected.

13) Conntrack bridge does not depend on nf_tables_bridge.

14) Turn NF_TABLES_BRIDGE into tristate to fix possible
    link break of nft_meta_bridge, from Arnd Bergmann.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range.  This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.

On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.

The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:

    $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
    248

Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.

This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:

    # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
    add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
    Data                                         old     new   delta
    sysctl_vals                                    -      12     +12
    __kstrtab_sysctl_vals                          -      12     +12
    max                                           14      10      -4
    int_max                                       16       -     -16
    one                                           68       -     -68
    zero                                         128      28    -100
    Total: Before=20583249, After=20583085, chg -0.00%

[mcroce@redhat.com: tipc: remove two unused variables]
  Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
  Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When conntracks change during a dialog, SDP messages may be sent from
different conntracks to establish expects with identical tuples. In this
case expects conflict may be detected for the 2nd SDP message and end up
with a process failure.

The fixing here is to reuse an existing expect who has the same tuple for a
different conntrack if any.

Here are two scenarios for the case.

1)
         SERVER                   CPE

           |      INVITE SDP       |
      5060 |<----------------------|5060
           |      100 Trying       |
      5060 |---------------------->|5060
           |      183 SDP          |
      5060 |---------------------->|5060    ===> Conntrack 1
           |       PRACK           |
     50601 |<----------------------|5060
           |    200 OK (PRACK)     |
     50601 |---------------------->|5060
           |    200 OK (INVITE)    |
      5060 |---------------------->|5060
           |        ACK            |
     50601 |<----------------------|5060
           |                       |
           |<--- RTP stream ------>|
           |                       |
           |    INVITE SDP (t38)   |
     50601 |---------------------->|5060    ===> Conntrack 2

With a certain configuration in the CPE, SIP messages "183 with SDP" and
"re-INVITE with SDP t38" will go through the sip helper to create
expects for RTP and RTCP.

It is okay to create RTP and RTCP expects for "183", whose master
connection source port is 5060, and destination port is 5060.

In the "183" message, port in Contact header changes to 50601 (from the
original 5060). So the following requests e.g. PRACK and ACK are sent to
port 50601. It is a different conntrack (let call Conntrack 2) from the
original INVITE (let call Conntrack 1) due to the port difference.

In this example, after the call is established, there is RTP stream but no
RTCP stream for Conntrack 1, so the RTP expect created upon "183" is
cleared, and RTCP expect created for Conntrack 1 retains.

When "re-INVITE with SDP t38" arrives to create RTP&RTCP expects, current
ALG implementation will call nf_ct_expect_related() for RTP and RTCP. The
expects tuples are identical to those for Conntrack 1. RTP expect for
Conntrack 2 succeeds in creation as the one for Conntrack 1 has been
removed. RTCP expect for Conntrack 2 fails in creation because it has
idential tuples and 'conflict' with the one retained for Conntrack 1. And
then result in a failure in processing of the re-INVITE.

2)

    SERVER A                 CPE

       |      REGISTER     |
  5060 |<------------------| 5060  ==> CT1
       |       200         |
  5060 |------------------>| 5060
       |                   |
       |   INVITE SDP(1)   |
  5060 |<------------------| 5060
       | 300(multi choice) |
  5060 |------------------>| 5060                    SERVER B
       |       ACK         |
  5060 |<------------------| 5060
                                  |    INVITE SDP(2)    |
                             5060 |-------------------->| 5060  ==> CT2
                                  |       100           |
                             5060 |<--------------------| 5060
                                  | 200(contact changes)|
                             5060 |<--------------------| 5060
                                  |       ACK           |
                             5060 |-------------------->| 50601 ==> CT3
                                  |                     |
                                  |<--- RTP stream ---->|
                                  |                     |
                                  |       BYE           |
                             5060 |<--------------------| 50601
                                  |       200           |
                             5060 |-------------------->| 50601
       |   INVITE SDP(3)   |
  5060 |<------------------| 5060  ==> CT1

CPE sends an INVITE request(1) to Server A, and creates a RTP&RTCP expect
pair for this Conntrack 1 (CT1). Server A responds 300 to redirect to
Server B. The RTP&RTCP expect pairs created on CT1 are removed upon 300
response.

CPE sends the INVITE request(2) to Server B, and creates an expect pair
for the new conntrack (due to destination address difference), let call
CT2. Server B changes the port to 50601 in 200 OK response, and the
following requests ACK and BYE from CPE are sent to 50601. The call is
established. There is RTP stream and no RTCP stream. So RTP expect is
removed and RTCP expect for CT2 retains.

As BYE request is sent from port 50601, it is another conntrack, let call
CT3, different from CT2 due to the port difference. So the BYE request will
not remove the RTCP expect for CT2.

Then another outgoing call is made, with the same RTP port being used (not
definitely but possibly). CPE firstly sends the INVITE request(3) to Server
A, and tries to create a RTP&RTCP expect pairs for this CT1. In current ALG
implementation, the RTCP expect for CT1 fails in creation because it
'conflicts' with the residual one for CT2. As a result the INVITE request
fails to send.

Signed-off-by: xiao ruizhu <katrina.xiaorz@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Two cases of overlapping changes, nothing fancy.

Signed-off-by: David S. Miller <davem@davemloft.net>