linux.git/net/mac80211/debugfs_key.c, branch v5.1

mac80211: move TKIP TX IVs to public part of key struct

2016-02-24T08:04:38+00:00

Some drivers/devices might want to set the IVs by
themselves (and still let mac80211 generate MMIC).

Specifically, this is needed when the device does
offloading at certain times, and the driver has
to make sure that the IVs of new tx frames (from
the host) are synchronized with IVs that were
potentially used during the offloading.

Similarly to CCMP, move the TX IVs of TKIP keys to the
public part of the key struct, and export a function
to add the IV right into the crypto header.

The public tx_pn field is defined as atomic64, so define
TKIP_PN_TO_IV16/32 helper macros to convert it to iv16/32
when needed.

Since the iv32 used for the p1k cache is taken
directly from the frame, we can safely remove
iv16/32 from being protected by tkip.txlock.

Signed-off-by: Eliad Peller 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg

mac80211: allow writing TX PN in debugfs

2015-09-29T13:56:50+00:00

For certain tests, for example replay detection, it can be useful
to be able to influence/set the PN used in outgoing packets. Make
it possible to change the TX PN in debugfs.

For now, this doesn't support TKIP since I haven't needed it, but
there's no reason it couldn't be added if necessary.

Note that this must be used very carefully: it could, for example,
be used to make "valid replays" where the PN reuse happens on a
different TID. This couldn't be done by an attacker since the TID
is protected as part of the AAD.

Signed-off-by: Johannes Berg

mac80211: remove key TX/RX counter

2015-07-17T13:38:01+00:00

This counter is inherently racy (since it can be incremented by RX
as well as by concurrent TX) and only available in debugfs. Instead
of fixing it to be per-CPU or similar, remove it for now. If needed
it should be added without races and with proper nl80211, perhaps
even addressing the threshold reporting TODO item that's been there
since the code was originally added.

Signed-off-by: Johannes Berg

mac80211: move TX PN to public part of key struct

2015-06-02T09:16:35+00:00

For drivers supporting TSO or similar features, but that still have
PN assignment in software, there's a need to have some memory to
store the current PN value. As mac80211 already stores this and it's
somewhat complicated to add a per-driver area to the key struct (due
to the dynamic sizing thereof) it makes sense to just move the TX PN
to the keyconf, i.e. the public part of the key struct.

As TKIP is more complicated and we won't able to offload it in this
way right now (fast-xmit is skipped for TKIP unless the HW does it
all, and our hardware needs MMIC calculation in software) I've not
moved that for now - it's possible but requires exposing a lot of
the internal TKIP state.

As an bonus side effect, we can remove a lot of code by assuming the
keyseq struct has a certain layout - with BUILD_BUG_ON to verify it.

This might also improve performance, since now TX and RX no longer
share a cacheline.

Reviewed-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg

mac80111: Add BIP-GMAC-128 and BIP-GMAC-256 ciphers

2015-01-27T10:10:13+00:00

This allows mac80211 to configure BIP-GMAC-128 and BIP-GMAC-256 to the
driver and also use software-implementation within mac80211 when the
driver does not support this with hardware accelaration.

Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg

mac80111: Add BIP-CMAC-256 cipher

2015-01-27T10:09:13+00:00

This allows mac80211 to configure BIP-CMAC-256 to the driver and also
use software-implementation within mac80211 when the driver does not
support this with hardware accelaration.

Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg

mac80111: Add CCMP-256 cipher

2015-01-27T10:07:35+00:00

This allows mac80211 to configure CCMP-256 to the driver and also use
software-implementation within mac80211 when the driver does not support
this with hardware accelaration.

Signed-off-by: Jouni Malinen 
[squash ccmp256 -> mic_len argument change]
Signed-off-by: Johannes Berg

mac80111: Add GCMP and GCMP-256 ciphers

2015-01-27T10:06:09+00:00

This allows mac80211 to configure GCMP and GCMP-256 to the driver and
also use software-implementation within mac80211 when the driver does
not support this with hardware accelaration.

Signed-off-by: Jouni Malinen 
[remove a spurious newline]
Signed-off-by: Johannes Berg

mac80211: remove unnecessary null test before debugfs_remove()

2014-10-21T19:08:10+00:00

The debugfs_remove() function can safely take NULL parameters
so the additionally null test isn't required, and there's no
other reason to have it here, so remove it.

Signed-off-by: Fabian Frederick 
[rewrite commit message, re-introduce blank line after assert]
Signed-off-by: Johannes Berg

mac80211: move sdata debugfs dir to vif

2013-03-18T19:10:04+00:00

There is need create driver own per interface debugfs files. This is
currently done by drv_{add,remove}_interface_debugfs() callbacks. But it
is possible that after we remove interface from the driver (i.e.
on suspend) we call drv_remove_interface_debugfs() function. Fixing this
problem will require to add call drv_{add,remove}_interface_debugfs()
anytime we create and remove interface in mac80211. So it's better to
add debugfs dir dentry to vif structure to allow to create/remove
custom debugfs driver files on drv_{add,remove}_interface().

Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Johannes Berg