linux.git/net/ipv6, branch v6.2-rc8 Linux kernel source tree txhash: fix sk->sk_txrehash default 2023-02-08T09:07:11+00:00 Kevin Yang yyd@google.com 2023-02-07T02:08:20+00:00 c11204c78d6966c5bda6dd05c3ac5cbb193f93e3 This code fix a bug that sk->sk_txrehash gets its default enable value from sysctl_txrehash only when the socket is a TCP listener. We should have sysctl_txrehash to set the default sk->sk_txrehash, no matter TCP, nor listerner/connector. Tested by following packetdrill: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4 // SO_TXREHASH == 74, default to sysctl_txrehash == 1 +0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0 +0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0 Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This code fix a bug that sk->sk_txrehash gets its default enable
value from sysctl_txrehash only when the socket is a TCP listener.

We should have sysctl_txrehash to set the default sk->sk_txrehash,
no matter TCP, nor listerner/connector.

Tested by following packetdrill:
  0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
  +0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4
  // SO_TXREHASH == 74, default to sysctl_txrehash == 1
  +0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0
  +0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0

Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip/ip6_gre: Fix non-point-to-point tunnel not generating IPv6 link local address 2023-02-02T03:52:22+00:00 Thomas Winter Thomas.Winter@alliedtelesis.co.nz 2023-01-31T03:46:46+00:00 30e2291f61f93f7132c060190f8360df52644ec1 We recently found that our non-point-to-point tunnels were not generating any IPv6 link local address and instead generating an IPv6 compat address, breaking IPv6 communication on the tunnel. Previously, addrconf_gre_config always would call addrconf_addr_gen and generate a EUI64 link local address for the tunnel. Then commit e5dd729460ca changed the code path so that add_v4_addrs is called but this only generates a compat IPv6 address for non-point-to-point tunnels. I assume the compat address is specifically for SIT tunnels so have kept that only for SIT - GRE tunnels now always generate link local addresses. Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
We recently found that our non-point-to-point tunnels were not
generating any IPv6 link local address and instead generating an
IPv6 compat address, breaking IPv6 communication on the tunnel.

Previously, addrconf_gre_config always would call addrconf_addr_gen
and generate a EUI64 link local address for the tunnel.
Then commit e5dd729460ca changed the code path so that add_v4_addrs
is called but this only generates a compat IPv6 address for
non-point-to-point tunnels.

I assume the compat address is specifically for SIT tunnels so
have kept that only for SIT - GRE tunnels now always generate link
local addresses.

Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip/ip6_gre: Fix changing addr gen mode not generating IPv6 link local address 2023-02-02T03:52:22+00:00 Thomas Winter Thomas.Winter@alliedtelesis.co.nz 2023-01-31T03:46:45+00:00 23ca0c2c93406bdb1150659e720bda1cec1fad04 For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they come up to generate the IPv6 link local address for the interface. Recently we found that they were no longer generating IPv6 addresses. This issue would also have affected SIT tunnels. Commit e5dd729460ca changed the code path so that GRE tunnels generate an IPv6 address based on the tunnel source address. It also changed the code path so GRE tunnels don't call addrconf_addr_gen in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode when the IN6_ADDR_GEN_MODE is changed. This patch aims to fix this issue by moving the code in addrconf_notify which calls the addr gen for GRE and SIT into a separate function and calling it in the places that expect the IPv6 address to be generated. The previous addrconf_dev_config is renamed to addrconf_eth_config since it only expected eth type interfaces and follows the addrconf_gre/sit_config format. A part of this changes means that the loopback address will be attempted to be configured when changing addr_gen_mode for lo. This should not be a problem because the address should exist anyway and if does already exist then no error is produced. Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE
when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they
come up to generate the IPv6 link local address for the interface.
Recently we found that they were no longer generating IPv6 addresses.
This issue would also have affected SIT tunnels.

Commit e5dd729460ca changed the code path so that GRE tunnels
generate an IPv6 address based on the tunnel source address.
It also changed the code path so GRE tunnels don't call addrconf_addr_gen
in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode
when the IN6_ADDR_GEN_MODE is changed.

This patch aims to fix this issue by moving the code in addrconf_notify
which calls the addr gen for GRE and SIT into a separate function
and calling it in the places that expect the IPv6 address to be
generated.

The previous addrconf_dev_config is renamed to addrconf_eth_config
since it only expected eth type interfaces and follows the
addrconf_gre/sit_config format.

A part of this changes means that the loopback address will be
attempted to be configured when changing addr_gen_mode for lo.
This should not be a problem because the address should exist anyway
and if does already exist then no error is produced.

Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6: fix reachability confirmation with proxy_ndp 2023-01-23T11:17:37+00:00 Gergely Risko gergely.risko@gmail.com 2023-01-19T13:40:41+00:00 9f535c870e493841ac7be390610ff2edec755762 When proxying IPv6 NDP requests, the adverts to the initial multicast solicits are correct and working. On the other hand, when later a reachability confirmation is requested (on unicast), no reply is sent. This causes the neighbor entry expiring on the sending node, which is mostly a non-issue, as a new multicast request is sent. There are routers, where the multicast requests are intentionally delayed, and in these environments the current implementation causes periodic packet loss for the proxied endpoints. The root cause is the erroneous decrease of the hop limit, as this is checked in ndisc.c and no answer is generated when it's 254 instead of the correct 255. Cc: stable@vger.kernel.org Fixes: 46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()") Signed-off-by: Gergely Risko <gergely.risko@gmail.com> Tested-by: Gergely Risko <gergely.risko@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
When proxying IPv6 NDP requests, the adverts to the initial multicast
solicits are correct and working.  On the other hand, when later a
reachability confirmation is requested (on unicast), no reply is sent.

This causes the neighbor entry expiring on the sending node, which is
mostly a non-issue, as a new multicast request is sent.  There are
routers, where the multicast requests are intentionally delayed, and in
these environments the current implementation causes periodic packet
loss for the proxied endpoints.

The root cause is the erroneous decrease of the hop limit, as this
is checked in ndisc.c and no answer is generated when it's 254 instead
of the correct 255.

Cc: stable@vger.kernel.org
Fixes: 46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()")
Signed-off-by: Gergely Risko <gergely.risko@gmail.com>
Tested-by: Gergely Risko <gergely.risko@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames 2023-01-11T12:49:13+00:00 Herbert Xu herbert@gondor.apana.org.au 2023-01-10T00:59:06+00:00 cb3e9864cdbe35ff6378966660edbcbac955fe17 The total cork length created by ip6_append_data includes extension headers, so we must exclude them when comparing them against the IPV6_CHECKSUM offset which does not include extension headers. Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 
The total cork length created by ip6_append_data includes extension
headers, so we must exclude them when comparing them against the
IPV6_CHECKSUM offset which does not include extension headers.

Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
treewide: Convert del_timer*() to timer_shutdown*() 2022-12-25T21:38:09+00:00 Steven Rostedt (Google) rostedt@goodmis.org 2022-12-20T18:45:19+00:00 292a089d78d3e2f7944e60bb897c977785a321e3 Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2022-12-13T23:47:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-13T23:47:48+00:00 7e68dd7d07a28faa2e6574dd6b9dbd90cdeaae91 Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ... 
Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev <-> devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-12-13T08:49:29+00:00 Paolo Abeni pabeni@redhat.com 2022-12-13T08:24:49+00:00 b11919e1bb7f6f6273f5a33947b8496da2769eb8 Merge in the left-over fixes before the net-next pull-request. net/mptcp/subflow.c d3295fee3c75 ("mptcp: use proper req destructor for IPv6") 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Merge in the left-over fixes before the net-next pull-request.

net/mptcp/subflow.c
  d3295fee3c75 ("mptcp: use proper req destructor for IPv6")
  36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random 2022-12-13T00:22:22+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-13T00:22:22+00:00 268325bda5299836a6ad4c3952474a2be125da5f Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include <linux/once.h> in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ... 
Pull random number generator updates from Jason Donenfeld:

 - Replace prandom_u32_max() and various open-coded variants of it,
   there is now a new family of functions that uses fast rejection
   sampling to choose properly uniformly random numbers within an
   interval:

       get_random_u32_below(ceil) - [0, ceil)
       get_random_u32_above(floor) - (floor, U32_MAX]
       get_random_u32_inclusive(floor, ceil) - [floor, ceil]

   Coccinelle was used to convert all current users of
   prandom_u32_max(), as well as many open-coded patterns, resulting in
   improvements throughout the tree.

   I'll have a "late" 6.1-rc1 pull for you that removes the now unused
   prandom_u32_max() function, just in case any other trees add a new
   use case of it that needs to converted. According to linux-next,
   there may be two trivial cases of prandom_u32_max() reintroductions
   that are fixable with a 's/.../.../'. So I'll have for you a final
   conversion patch doing that alongside the removal patch during the
   second week.

   This is a treewide change that touches many files throughout.

 - More consistent use of get_random_canary().

 - Updates to comments, documentation, tests, headers, and
   simplification in configuration.

 - The arch_get_random*_early() abstraction was only used by arm64 and
   wasn't entirely useful, so this has been replaced by code that works
   in all relevant contexts.

 - The kernel will use and manage random seeds in non-volatile EFI
   variables, refreshing a variable with a fresh seed when the RNG is
   initialized. The RNG GUID namespace is then hidden from efivarfs to
   prevent accidental leakage.

   These changes are split into random.c infrastructure code used in the
   EFI subsystem, in this pull request, and related support inside of
   EFISTUB, in Ard's EFI tree. These are co-dependent for full
   functionality, but the order of merging doesn't matter.

 - Part of the infrastructure added for the EFI support is also used for
   an improvement to the way vsprintf initializes its siphash key,
   replacing an sleep loop wart.

 - The hardware RNG framework now always calls its correct random.c
   input function, add_hwgenerator_randomness(), rather than sometimes
   going through helpers better suited for other cases.

 - The add_latent_entropy() function has long been called from the fork
   handler, but is a no-op when the latent entropy gcc plugin isn't
   used, which is fine for the purposes of latent entropy.

   But it was missing out on the cycle counter that was also being mixed
   in beside the latent entropy variable. So now, if the latent entropy
   gcc plugin isn't enabled, add_latent_entropy() will expand to a call
   to add_device_randomness(NULL, 0), which adds a cycle counter,
   without the absent latent entropy variable.

 - The RNG is now reseeded from a delayed worker, rather than on demand
   when used. Always running from a worker allows it to make use of the
   CPU RNG on platforms like S390x, whose instructions are too slow to
   do so from interrupts. It also has the effect of adding in new inputs
   more frequently with more regularity, amounting to a long term
   transcript of random values. Plus, it helps a bit with the upcoming
   vDSO implementation (which isn't yet ready for 6.2).

 - The jitter entropy algorithm now tries to execute on many different
   CPUs, round-robining, in hopes of hitting even more memory latencies
   and other unpredictable effects. It also will mix in a cycle counter
   when the entropy timer fires, in addition to being mixed in from the
   main loop, to account more explicitly for fluctuations in that timer
   firing. And the state it touches is now kept within the same cache
   line, so that it's assured that the different execution contexts will
   cause latencies.

* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
  random: include <linux/once.h> in the right header
  random: align entropy_timer_state to cache line
  random: mix in cycle counter when jitter timer fires
  random: spread out jitter callback to different CPUs
  random: remove extraneous period and add a missing one in comments
  efi: random: refresh non-volatile random seed when RNG is initialized
  vsprintf: initialize siphash key using notifier
  random: add back async readiness notifier
  random: reseed in delayed work rather than on-demand
  random: always mix cycle counter in add_latent_entropy()
  hw_random: use add_hwgenerator_randomness() for early entropy
  random: modernize documentation comment on get_random_bytes()
  random: adjust comment to account for removed function
  random: remove early archrandom abstraction
  random: use random.trust_{bootloader,cpu} command line option only
  stackprotector: actually use get_random_canary()
  stackprotector: move get_random_canary() into stackprotector.h
  treewide: use get_random_u32_inclusive() when possible
  treewide: use get_random_u32_{above,below}() instead of manual loop
  treewide: use get_random_u32_below() instead of deprecated function
  ...
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver 2022-12-12T23:41:44+00:00 Coco Li lixiaoyan@google.com 2022-12-10T04:16:45+00:00 89300468e2b2ec216c7827ba04ac45c129794403 IPv6/TCP and GRO stacks can build big TCP packets with an added temporary Hop By Hop header. Is GSO is not involved, then the temporary header needs to be removed in the driver. This patch provides a generic helper for drivers that need to modify their headers in place. Tested: Compiled and ran with ethtool -K eth1 tso off Could send Big TCP packets Signed-off-by: Coco Li <lixiaoyan@google.com> Link: https://lore.kernel.org/r/20221210041646.3587757-1-lixiaoyan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
IPv6/TCP and GRO stacks can build big TCP packets with an added
temporary Hop By Hop header.

Is GSO is not involved, then the temporary header needs to be removed in
the driver. This patch provides a generic helper for drivers that need
to modify their headers in place.

Tested:
Compiled and ran with ethtool -K eth1 tso off
Could send Big TCP packets

Signed-off-by: Coco Li <lixiaoyan@google.com>
Link: https://lore.kernel.org/r/20221210041646.3587757-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>