linux.git/net/ipv6, branch v4.19-rc2

net/ipv6: init ip6 anycast rt->dst.input as ip6_input

2018-08-23T04:48:37+00:00

Commit 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path")
forgot to handle anycast route and init anycast rt->dst.input to ip6_forward.
Fix it by setting anycast rt->dst.input back to ip6_input.

Fixes: 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path")
Signed-off-by: Hangbin Liu 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

addrconf: reduce unnecessary atomic allocations

2018-08-23T04:42:07+00:00

All the 3 callers of addrconf_add_mroute() assert RTNL
lock, they don't take any additional lock either, so
it is safe to convert it to GFP_KERNEL.

Same for sit_add_v4_addrs().

Cc: David Ahern 
Signed-off-by: Cong Wang 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

net/ipv6: Put lwtstate when destroying fib6_info

2018-08-21T01:18:40+00:00

Prior to the introduction of fib6_info lwtstate was managed by the dst
code. With fib6_info releasing lwtstate needs to be done when the struct
is freed.

Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

ip6_vti: fix a null pointer deference when destroy vti6 tunnel

2018-08-20T02:55:58+00:00

If load ip6_vti module and create a network namespace when set
fb_tunnels_only_for_init_net to 1, then exit the namespace will
cause following crash:

[ 6601.677036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 6601.679057] PGD 8000000425eca067 P4D 8000000425eca067 PUD 424292067 PMD 0
[ 6601.680483] Oops: 0000 [#1] SMP PTI
[ 6601.681223] CPU: 7 PID: 93 Comm: kworker/u16:1 Kdump: loaded Tainted: G            E     4.18.0+ #3
[ 6601.683153] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 6601.684919] Workqueue: netns cleanup_net
[ 6601.685742] RIP: 0010:vti6_exit_batch_net+0x87/0xd0 [ip6_vti]
[ 6601.686932] Code: 7b 08 48 89 e6 e8 b9 ea d3 dd 48 8b 1b 48 85 db 75 ec 48 83 c5 08 48 81 fd 00 01 00 00 75 d5 49 8b 84 24 08 01 00 00 48 89 e6 <48> 8b 78 08 e8 90 ea d3 dd 49 8b 45 28 49 39 c6 4c 8d 68 d8 75 a1
[ 6601.690735] RSP: 0018:ffffa897c2737de0 EFLAGS: 00010246
[ 6601.691846] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dead000000000200
[ 6601.693324] RDX: 0000000000000015 RSI: ffffa897c2737de0 RDI: ffffffff9f2ea9e0
[ 6601.694824] RBP: 0000000000000100 R08: 0000000000000000 R09: 0000000000000000
[ 6601.696314] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8dc323c07e00
[ 6601.697812] R13: ffff8dc324a63100 R14: ffffa897c2737e30 R15: ffffa897c2737e30
[ 6601.699345] FS:  0000000000000000(0000) GS:ffff8dc33fdc0000(0000) knlGS:0000000000000000
[ 6601.701068] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6601.702282] CR2: 0000000000000008 CR3: 0000000424966002 CR4: 00000000001606e0
[ 6601.703791] Call Trace:
[ 6601.704329]  cleanup_net+0x1b4/0x2c0
[ 6601.705268]  process_one_work+0x16c/0x370
[ 6601.706145]  worker_thread+0x49/0x3e0
[ 6601.706942]  kthread+0xf8/0x130
[ 6601.707626]  ? rescuer_thread+0x340/0x340
[ 6601.708476]  ? kthread_bind+0x10/0x10
[ 6601.709266]  ret_from_fork+0x35/0x40

Reproduce:
modprobe ip6_vti
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
unshare -n
exit

This because ip6n->tnls_wc[0] point to fallback device in default, but
in non-default namespace, ip6n->tnls_wc[0] will be NULL, so add the NULL
check comparatively.

Fixes: e2948e5af8ee ("ip6_vti: fix creating fallback tunnel device for vti6")
Signed-off-by: Haishuang Yan 
Signed-off-by: David S. Miller

ip6_vti: fix creating fallback tunnel device for vti6

2018-08-19T18:26:39+00:00

When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel
device for vti6 when a new namespace is created.

Tested:
[root@builder2 ~]# modprobe ip6_tunnel
[root@builder2 ~]# modprobe ip6_vti
[root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
[root@builder2 ~]# unshare -n
[root@builder2 ~]# ip link
1: lo:  mtu 65536 qdisc noop state DOWN mode DEFAULT group
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

Signed-off-by: Haishuang Yan 
Signed-off-by: David S. Miller

ip6_vti: simplify stats handling in vti6_xmit

2018-08-18T20:46:54+00:00

Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit
code path.

Signed-off-by: Haishuang Yan 
Signed-off-by: David S. Miller

netfilter: ip6t_rpfilter: set F_IFACE for linklocal addresses

2018-08-16T17:36:58+00:00

Roman reports that DHCPv6 client no longer sees replies from server
due to

ip6tables -t raw -A PREROUTING -m rpfilter --invert -j DROP

rule.  We need to set the F_IFACE flag for linklocal addresses, they
are scoped per-device.

Fixes: 47b7e7f82802 ("netfilter: don't set F_IFACE on ipv6 fib lookups")
Reported-by: Roman Mamedov 
Tested-by: Roman Mamedov 
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2018-08-13T17:07:23+00:00

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-13

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add driver XDP support for veth. This can be used in conjunction with
   redirect of another XDP program e.g. sitting on NIC so the xdp_frame
   can be forwarded to the peer veth directly without modification,
   from Toshiaki.

2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
   in order to provide more control and visibility on where a SO_REUSEPORT
   sk should be located, and the latter enables to directly select a sk
   from the bpf map. This also enables map-in-map for application migration
   use cases, from Martin.

3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
   of cgroup v2 that is the ancestor of the cgroup associated with the
   skb at the ancestor_level, from Andrey.

4) Implement BPF fs map pretty-print support based on BTF data for regular
   hash table and LRU map, from Yonghong.

5) Decouple the ability to attach BTF for a map from the key and value
   pretty-printer in BPF fs, and enable further support of BTF for maps for
   percpu and LPM trie, from Daniel.

6) Implement a better BPF sample of using XDP's CPU redirect feature for
   load balancing SKB processing to remote CPU. The sample implements the
   same XDP load balancing as Suricata does which is symmetric hash based
   on IP and L4 protocol, from Jesper.

7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
   critical path as it is ensured that the allocator is present, from Björn.
====================

Signed-off-by: David S. Miller

ipv6: Add icmp_echo_ignore_all support for ICMPv6

2018-08-13T15:42:25+00:00

Preventing the kernel from responding to ICMP Echo Requests messages
can be useful in several ways. The sysctl parameter
'icmp_echo_ignore_all' can be used to prevent the kernel from
responding to IPv4 ICMP echo requests. For IPv6 pings, such
a sysctl kernel parameter did not exist.

Add the ability to prevent the kernel from responding to IPv6
ICMP echo requests through the use of the following sysctl
parameter : /proc/sys/net/ipv6/icmp/echo_ignore_all.
Update the documentation to reflect this change.

Signed-off-by: Virgile Jarry 
Signed-off-by: David S. Miller

bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection

2018-08-10T23:58:46+00:00

This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a
SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in
the earlier patch.  "bpf_run_sk_reuseport()" will return -ECONNREFUSED
when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP.
The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to
handle this case and return NULL immediately instead of continuing the
sk search from its hashtable.

It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach
BPF_PROG_TYPE_SK_REUSEPORT.  The "sk_reuseport_attach_bpf()" will check
if the attaching bpf prog is in the new SK_REUSEPORT or the existing
SOCKET_FILTER type and then check different things accordingly.

One level of "__reuseport_attach_prog()" call is removed.  The
"sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed
back to "reuseport_attach_prog()" in sock_reuseport.c.  sock_reuseport.c
seems to have more knowledge on those test requirements than filter.c.
In "reuseport_attach_prog()", after new_prog is attached to reuse->prog,
the old_prog (if any) is also directly freed instead of returning the
old_prog to the caller and asking the caller to free.

The sysctl_optmem_max check is moved back to the
"sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()".
As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only
bounded by the usual "bpf_prog_charge_memlock()" during load time
instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max.

Signed-off-by: Martin KaFai Lau 
Acked-by: Alexei Starovoitov 
Signed-off-by: Daniel Borkmann