RFC 4293 defines ipIfStatsOutOctets (similar definition for
ipSystemStatsOutOctets):

   The total number of octets in IP datagrams delivered to the lower
   layers for transmission.  Octets from datagrams counted in
   ipIfStatsOutTransmits MUST be counted here.

And ipIfStatsOutTransmits:

   The total number of IP datagrams that this entity supplied to the
   lower layers for transmission.  This includes datagrams generated
   locally and those forwarded by this entity.

Therefore, IPSTATS_MIB_OUTOCTETS must be incremented when incrementing
IPSTATS_MIB_OUTFORWDATAGRAMS.

IP_UPD_PO_STATS is not used since ipIfStatsOutRequests must not
include forwarded datagrams:

   The total number of IP datagrams that local IP user-protocols
   (including ICMP) supplied to IP in requests for transmission.  Note
   that this counter does not include any datagrams counted in
   ipIfStatsOutForwDatagrams.

Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5339ab8b1dd82 (ipv6: fib: Convert fib6_age() to
dst_neigh_lookup().) seems to have mistakenly inverted the
exception for cached NTF_ROUTER routes.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

While testing how linux behaves on SYNFLOOD attack on multiqueue device
(ixgbe), I found that SYNACK messages were dropped at Qdisc level
because we send them all on a single queue.

Obvious choice is to reflect incoming SYN packet @queue_mapping to
SYNACK packet.

Under stress, my machine could only send 25.000 SYNACK per second (for
200.000 incoming SYN per second). NIC : ixgbe with 16 rx/tx queues.

After patch, not a single SYNACK is dropped.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hans Schillstrom <hans.schillstrom@ericsson.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit ad0081e43a
"ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed"
the fragment of packets is incorrect.
because tunnel mode needs IPsec headers and trailer for all fragments,
while on transport mode it is sufficient to add the headers to the
first fragment and the trailer to the last.

so modify mtu and maxfraglen base on ipsec mode and if fragment is first
or last.

with my test,it work well(every fragment's size is the mtu)
and does not trigger slow fragment path.

Changes from v1:
	though optimization, mtu_prev and maxfraglen_prev can be delete.
	replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL.
	add fuction ip6_append_data_mtu to make codes clearer.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Corrects the function that determines the esp payload size. The calculations
done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for
certain mtu values and suboptimal frames for others.

According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(),
net_header_len must be taken into account before doing the alignment
calculation.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following tightens the padding check from commit
c1412fce7eccae62b4de22494f6ab3ff8a90c0c6 :

* Take into account combinations of consecutive Pad1 and PadN.

* Catch the corner case of when only padding is present in the
  header, when the extention header length is 0 (i.e., 8 bytes).
  In this case, the header would have exactly 6 bytes of padding:

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
:  Next Header  : Hdr Ext Len=0 :                               :
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               +
:                        Padding (Pad1 or PadN)                 :
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_frag_reasm() can use skb_try_coalesce() to build optimized skb,
reducing memory used by them (truesize), and reducing number of cache
line misses and overhead for the consumer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed space issues relating to operators found by
checkpatch.pl tool in net/ipv6/udp.c

Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed a trailing white space issue found by
checkpatch.pl tool in net/ipv6/udp.c

Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the allfrag feature has been set on a host route (due to an ICMPv6
Packet Too Big received indicating a MTU of less than 1280), we hit a
very slow behavior in TCP stack, because all big packets are dropped and
only a retransmit timer is able to push one MSS frame every 200 ms.

One way to handle this is to disable GSO on the socket the first time a
super packet is dropped. Adding a specific dst_allfrag() in the fast
path is probably overkill since the dst_allfrag() case almost never
happen.

Result on netperf TCP_STREAM, one flow :

Before : 60 kbit/sec
After : 1.6 Gbit/sec

Reported-by: Tore Anderson <tore@fud.no>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Tore Anderson <tore@fud.no>
Signed-off-by: David S. Miller <davem@davemloft.net>