linux.git/net/ipv6/ip6mr.c, branch v6.5 Linux kernel source tree ip6mr: Fix skb_under_panic in ip6mr_cache_report() 2023-08-02T09:35:21+00:00 Yue Haibing yuehaibing@huawei.com 2023-08-01T06:43:18+00:00 30e0191b16e8a58e4620fa3e2839ddc7b9d4281c skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails. Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4
 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
 ------------[ cut here ]------------
 kernel BUG at net/core/skbuff.c:192!
 invalid opcode: 0000 [#1] PREEMPT SMP KASAN
 CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:skb_panic+0x152/0x1d0
 Call Trace:
  <TASK>
  skb_push+0xc4/0xe0
  ip6mr_cache_report+0xd69/0x19b0
  reg_vif_xmit+0x406/0x690
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  vlan_dev_hard_start_xmit+0x3ab/0x5c0
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  neigh_connected_output+0x3ed/0x570
  ip6_finish_output2+0x5b5/0x1950
  ip6_finish_output+0x693/0x11c0
  ip6_output+0x24b/0x880
  NF_HOOK.constprop.0+0xfd/0x530
  ndisc_send_skb+0x9db/0x1400
  ndisc_send_rs+0x12a/0x6c0
  addrconf_dad_completed+0x3c9/0xea0
  addrconf_dad_work+0x849/0x1420
  process_one_work+0xa22/0x16e0
  worker_thread+0x679/0x10c0
  ret_from_fork+0x28/0x60
  ret_from_fork_asm+0x11/0x20

When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
    ip6mr_cache_report()
        skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declared as:
	void *skb_push(struct sk_buff *skb, unsigned int len);
		skb->data -= len;
		//0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.

Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: ioctl: Use kernel memory on protocol ioctl callbacks 2023-06-16T05:33:26+00:00 Breno Leitao leitao@debian.org 2023-06-09T15:27:42+00:00 e1d001fa5b477c4da46a29be1fcece91db7c7c6f Most of the ioctls to net protocols operates directly on userspace argument (arg). Usually doing get_user()/put_user() directly in the ioctl callback. This is not flexible, because it is hard to reuse these functions without passing userspace buffers. Change the "struct proto" ioctls to avoid touching userspace memory and operate on kernel buffers, i.e., all protocol's ioctl callbacks is adapted to operate on a kernel memory other than on userspace (so, no more {put,get}_user() and friends being called in the ioctl callback). This changes the "struct proto" ioctl format in the following way: int (*ioctl)(struct sock *sk, int cmd, - unsigned long arg); + int *karg); (Important to say that this patch does not touch the "struct proto_ops" protocols) So, the "karg" argument, which is passed to the ioctl callback, is a pointer allocated to kernel space memory (inside a function wrapper). This buffer (karg) may contain input argument (copied from userspace in a prep function) and it might return a value/buffer, which is copied back to userspace if necessary. There is not one-size-fits-all format (that is I am using 'may' above), but basically, there are three type of ioctls: 1) Do not read from userspace, returns a result to userspace 2) Read an input parameter from userspace, and does not return anything to userspace 3) Read an input from userspace, and return a buffer to userspace. The default case (1) (where no input parameter is given, and an "int" is returned to userspace) encompasses more than 90% of the cases, but there are two other exceptions. Here is a list of exceptions: * Protocol RAW: * cmd = SIOCGETVIFCNT: * input and output = struct sioc_vif_req * cmd = SIOCGETSGCNT * input and output = struct sioc_sg_req * Explanation: for the SIOCGETVIFCNT case, userspace passes the input argument, which is struct sioc_vif_req. Then the callback populates the struct, which is copied back to userspace. * Protocol RAW6: * cmd = SIOCGETMIFCNT_IN6 * input and output = struct sioc_mif_req6 * cmd = SIOCGETSGCNT_IN6 * input and output = struct sioc_sg_req6 * Protocol PHONET: * cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE * input int (4 bytes) * Nothing is copied back to userspace. For the exception cases, functions sock_sk_ioctl_inout() will copy the userspace input, and copy it back to kernel space. The wrapper that prepare the buffer and put the buffer back to user is sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now calls sk_ioctl(), which will handle all cases. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback.  This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.

Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).

This changes the "struct proto" ioctl format in the following way:

    int                     (*ioctl)(struct sock *sk, int cmd,
-                                        unsigned long arg);
+                                        int *karg);

(Important to say that this patch does not touch the "struct proto_ops"
protocols)

So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:

1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
  to userspace
3) Read an input from userspace, and return a buffer to userspace.

The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:

* Protocol RAW:
   * cmd = SIOCGETVIFCNT:
     * input and output = struct sioc_vif_req
   * cmd = SIOCGETSGCNT
     * input and output = struct sioc_sg_req
   * Explanation: for the SIOCGETVIFCNT case, userspace passes the input
     argument, which is struct sioc_vif_req. Then the callback populates
     the struct, which is copied back to userspace.

* Protocol RAW6:
   * cmd = SIOCGETMIFCNT_IN6
     * input and output = struct sioc_mif_req6
   * cmd = SIOCGETSGCNT_IN6
     * input and output = struct sioc_sg_req6

* Protocol PHONET:
  * cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
     * input int (4 bytes)
  * Nothing is copied back to userspace.

For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.

The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
treewide: Convert del_timer*() to timer_shutdown*() 2022-12-25T21:38:09+00:00 Steven Rostedt (Google) rostedt@goodmis.org 2022-12-20T18:45:19+00:00 292a089d78d3e2f7944e60bb897c977785a321e3 Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipv6: tunnels: use DEV_STATS_INC() 2022-11-16T12:48:44+00:00 Eric Dumazet edumazet@google.com 2022-11-15T08:53:57+00:00 2fad1ba354d4a82b1b635a78f25d9682d4febb5e Most of code paths in tunnels are lockless (eg NETIF_F_LLTX in tx). Adopt SMP safe DEV_STATS_{INC|ADD}() to update dev->stats fields. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Most of code paths in tunnels are lockless (eg NETIF_F_LLTX in tx).

Adopt SMP safe DEV_STATS_{INC|ADD}() to update dev->stats fields.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-09-22T20:02:10+00:00 Jakub Kicinski kuba@kernel.org 2022-09-22T20:02:10+00:00 0140a7168f8b2732f622fa2c500f1f8be212382a drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
drivers/net/ethernet/freescale/fec.h
  7b15515fc1ca ("Revert "fec: Restart PPS after link state change"")
  40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/

drivers/pinctrl/pinctrl-ocelot.c
  c297561bc98a ("pinctrl: ocelot: Fix interrupt controller")
  181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration")
https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/

tools/testing/selftests/drivers/net/bonding/Makefile
  bbb774d921e2 ("net: Add tests for bonding and team address list management")
  152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target")
https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/

drivers/net/can/usb/gs_usb.c
  5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition")
  45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support")
https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipmr: Always call ip{,6}_mr_forward() from RCU read-side critical section 2022-09-20T15:22:15+00:00 Ido Schimmel idosch@nvidia.com 2022-09-14T07:53:38+00:00 b07a9b26e2b1aa3711fd6935eccb08a463b1fb11 These functions expect to be called from RCU read-side critical section, but this only happens when invoked from the data path via ip{,6}_mr_input(). They can also be invoked from process context in response to user space adding a multicast route which resolves a cache entry with queued packets [1][2]. Fix by adding missing rcu_read_lock() / rcu_read_unlock() in these call paths. [1] WARNING: suspicious RCU usage 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted ----------------------------- net/ipv4/ipmr.c:84 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by smcrouted/246: #0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip_mroute_setsockopt+0x11c/0x1420 stack backtrace: CPU: 0 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x91/0xb9 vif_dev_read+0xbf/0xd0 ipmr_queue_xmit+0x135/0x1ab0 ip_mr_forward+0xe7b/0x13d0 ipmr_mfc_add+0x1a06/0x2ad0 ip_mroute_setsockopt+0x5c1/0x1420 do_ip_setsockopt+0x23d/0x37f0 ip_setsockopt+0x56/0x80 raw_setsockopt+0x219/0x290 __sys_setsockopt+0x236/0x4d0 __x64_sys_setsockopt+0xbe/0x160 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [2] WARNING: suspicious RCU usage 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted ----------------------------- net/ipv6/ip6mr.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by smcrouted/246: #0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip6_mroute_setsockopt+0x6b9/0x2630 stack backtrace: CPU: 1 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x91/0xb9 vif_dev_read+0xbf/0xd0 ip6mr_forward2.isra.0+0xc9/0x1160 ip6_mr_forward+0xef0/0x13f0 ip6mr_mfc_add+0x1ff2/0x31f0 ip6_mroute_setsockopt+0x1825/0x2630 do_ipv6_setsockopt+0x462/0x4440 ipv6_setsockopt+0x105/0x140 rawv6_setsockopt+0xd8/0x690 __sys_setsockopt+0x236/0x4d0 __x64_sys_setsockopt+0xbe/0x160 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: ebc3197963fc ("ipmr: add rcu protection over (struct vif_device)->dev") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
These functions expect to be called from RCU read-side critical section,
but this only happens when invoked from the data path via
ip{,6}_mr_input(). They can also be invoked from process context in
response to user space adding a multicast route which resolves a cache
entry with queued packets [1][2].

Fix by adding missing rcu_read_lock() / rcu_read_unlock() in these call
paths.

[1]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv4/ipmr.c:84 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
 #0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip_mroute_setsockopt+0x11c/0x1420

stack backtrace:
CPU: 0 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x91/0xb9
 vif_dev_read+0xbf/0xd0
 ipmr_queue_xmit+0x135/0x1ab0
 ip_mr_forward+0xe7b/0x13d0
 ipmr_mfc_add+0x1a06/0x2ad0
 ip_mroute_setsockopt+0x5c1/0x1420
 do_ip_setsockopt+0x23d/0x37f0
 ip_setsockopt+0x56/0x80
 raw_setsockopt+0x219/0x290
 __sys_setsockopt+0x236/0x4d0
 __x64_sys_setsockopt+0xbe/0x160
 do_syscall_64+0x34/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

[2]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv6/ip6mr.c:69 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
 #0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip6_mroute_setsockopt+0x6b9/0x2630

stack backtrace:
CPU: 1 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x91/0xb9
 vif_dev_read+0xbf/0xd0
 ip6mr_forward2.isra.0+0xc9/0x1160
 ip6_mr_forward+0xef0/0x13f0
 ip6mr_mfc_add+0x1ff2/0x31f0
 ip6_mroute_setsockopt+0x1825/0x2630
 do_ipv6_setsockopt+0x462/0x4440
 ipv6_setsockopt+0x105/0x140
 rawv6_setsockopt+0xd8/0x690
 __sys_setsockopt+0x236/0x4d0
 __x64_sys_setsockopt+0xbe/0x160
 do_syscall_64+0x34/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: ebc3197963fc ("ipmr: add rcu protection over (struct vif_device)->dev")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf: net: Change do_ipv6_getsockopt() to take the sockptr_t argument 2022-09-03T03:34:31+00:00 Martin KaFai Lau martin.lau@kernel.org 2022-09-02T00:28:53+00:00 6dadbe4bac68309eb46ab0f30e8ff47a789df49a Similar to the earlier patch that changes sk_getsockopt() to take the sockptr_t argument . This patch also changes do_ipv6_getsockopt() to take the sockptr_t argument such that a latter patch can make bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt(). Note on the change in ip6_mc_msfget(). This function is to return an array of sockaddr_storage in optval. This function is shared between ipv6_get_msfilter() and compat_ipv6_get_msfilter(). However, the sockaddr_storage is stored at different offset of the optval because of the difference between group_filter and compat_group_filter. Thus, a new 'ss_offset' argument is added to ip6_mc_msfget(). Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20220902002853.2892532-1-kafai@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> 
Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument .  This patch also changes
do_ipv6_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt().

Note on the change in ip6_mc_msfget().  This function is to
return an array of sockaddr_storage in optval.  This function
is shared between ipv6_get_msfilter() and compat_ipv6_get_msfilter().
However, the sockaddr_storage is stored at different offset of the
optval because of the difference between group_filter and
compat_group_filter.  Thus, a new 'ss_offset' argument is
added to ip6_mc_msfget().

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002853.2892532-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6mr: remove stray rcu_read_unlock() from ip6_mr_forward() 2022-07-27T02:59:18+00:00 Eric Dumazet edumazet@google.com 2022-07-25T20:05:54+00:00 a7e555d4a184d7da72ed6df7d6741dc190b5ca5b One rcu_read_unlock() should have been removed in blamed commit. Fixes: 9b1c21d898fd ("ip6mr: do not acquire mrt_lock while calling ip6_mr_forward()") Reported-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220725200554.2563581-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
One rcu_read_unlock() should have been removed in blamed commit.

Fixes: 9b1c21d898fd ("ip6mr: do not acquire mrt_lock while calling ip6_mr_forward()")
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220725200554.2563581-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ip6mr: add RTM_GETROUTE netlink op 2022-07-13T12:53:48+00:00 David Lamparter equinox@diac24.net 2022-07-12T12:10:02+00:00 d7c31cbde4bc6756d1a11747d2b99bc627001c86 The IPv6 multicast routing code previously implemented only the dump variant of RTM_GETROUTE. Implement single MFC item retrieval by copying and adapting the respective IPv4 code. Tested against FRRouting's IPv6 PIM stack. Signed-off-by: David Lamparter <equinox@diac24.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
The IPv6 multicast routing code previously implemented only the dump
variant of RTM_GETROUTE.  Implement single MFC item retrieval by copying
and adapting the respective IPv4 code.

Tested against FRRouting's IPv6 PIM stack.

Signed-off-by: David Lamparter <equinox@diac24.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6mr: convert mrt_lock to a spinlock 2022-06-24T10:34:38+00:00 Eric Dumazet edumazet@google.com 2022-06-23T04:34:49+00:00 a96f7a6a60b310fdb7913d5ae70961eeeca9527d mrt_lock is only held in write mode, from process context only. We can switch to a mere spinlock, and avoid blocking BH. Also, vif_dev_read() is always called under standard rcu_read_lock(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
mrt_lock is only held in write mode, from process context only.

We can switch to a mere spinlock, and avoid blocking BH.

Also, vif_dev_read() is always called under standard rcu_read_lock().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>