I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each nexthop is added like a single route in the routing table. All routes that have the same metric/weight and destination but not the same gateway are considering as ECMP routes. They are linked together, through a list called rt6i_siblings. ECMP routes can be added in one shot, with RTA_MULTIPATH attribute or one after the other (in both case, the flag NLM_F_EXCL should not be set). The patch is based on a previous work from Luc Saillard <luc.saillard@6wind.com>. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
fib6_add_1() should consistently return errno pointers, rather than a mixture of NULL and errno pointers. Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function fib6_add_1() returns ERR_PTR() or NULL pointer. The ERR_PTR() case check is missing in fib6_add(). dpatch engine is used to generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts: drivers/net/usb/qmi_wwan.c net/batman-adv/translation-table.c net/ipv6/route.c qmi_wwan.c resolution provided by Bjørn Mork. batman-adv conflict is dealing merely with the changes of global function names to have a proper subsystem prefix. ipv6's route.c conflict is merely two side-by-side additions of network namespace methods. Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 2bec5a369ee79576a3 (ipv6: fib: fix crash when changing large fib while dumping it) introduced ability to restart the dump at tree root, but failed to skip correctly a count of already dumped entries. Code didn't match Patrick intent. We must skip exactly the number of already dumped entries. Note that like other /proc/net files or netlink producers, we could still dump some duplicates entries. Reported-by: Debabrata Banerjee <dbavatar@gmail.com> Reported-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts: net/ipv6/route.c Pull in 'net' again to get the revert of Thomas's change which introduced regressions. Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 2a0c451ade8e1783c5d453948289e4a978d417c9. It causes crashes, because now ip6_null_entry is used before it is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts: net/ipv6/route.c This deals with a merge conflict between the net-next addition of the inetpeer network namespace ops, and Thomas Graf's bug fix in 2a0c451ade8e1783c5d453948289e4a978d417c9 which makes sure we don't register /proc/net/ipv6_route before it is actually safe to do so. Signed-off-by: David S. Miller <davem@davemloft.net>
/proc/net/ipv6_route reflects the contents of fib_table_hash. The proc handler is installed in ip6_route_net_init() whereas fib_table_hash is allocated in fib6_net_init() _after_ the proc handler has been installed. This opens up a short time frame to access fib_table_hash with its pants down. fib6_init() as a whole can't be moved to an earlier position as it also registers the rtnetlink message handlers which should be registered at the end. Therefore split it into fib6_init() which is run early and fib6_init_late() to register the rtnetlink message handlers. Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>