<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/net/ipv4, branch v5.18-rc2</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>net: ipv4: fix route with nexthop object delete warning</title>
<updated>2022-04-01T11:09:17+00:00</updated>
<author>
<name>Nikolay Aleksandrov</name>
<email>razor@blackwall.org</email>
</author>
<published>2022-04-01T07:33:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6bf92d70e690b7ff12b24f4bfff5e5434d019b82'/>
<id>6bf92d70e690b7ff12b24f4bfff5e5434d019b82</id>
<content type='text'>
FRR folks have hit a kernel warning[1] while deleting routes[2] which is
caused by trying to delete a route pointing to a nexthop id without
specifying nhid but matching on an interface. That is, a route is found
but we hit a warning while matching it. The warning is from
fib_info_nh() in include/net/nexthop.h because we run it on a fib_info
with nexthop object. The call chain is:
 inet_rtm_delroute -&gt; fib_table_delete -&gt; fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning). The fix is to not do any
matching in that branch if the fi has a nexthop object because those are
managed separately. I.e. we should match when deleting without nh spec and
should fail when deleting a nexthop route with old-style nh spec because
nexthop objects are managed separately, e.g.:
 $ ip r show 1.2.3.4/32
 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0

 $ ip r del 1.2.3.4/32
 $ ip r del 1.2.3.4/32 nhid 12
 &lt;both should work&gt;

 $ ip r del 1.2.3.4/32 dev dummy0
 &lt;should fail with ESRCH&gt;

[1]
 [  523.462226] ------------[ cut here ]------------
 [  523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460
 [  523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd
 [  523.462274]  videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse
 [  523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P           OE     5.16.18-200.fc35.x86_64 #1
 [  523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020
 [  523.462303] RIP: 0010:fib_nh_match+0x210/0x460
 [  523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff &lt;0f&gt; 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00
 [  523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286
 [  523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0
 [  523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380
 [  523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000
 [  523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031
 [  523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0
 [  523.462311] FS:  00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000
 [  523.462313] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [  523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0
 [  523.462315] Call Trace:
 [  523.462316]  &lt;TASK&gt;
 [  523.462320]  fib_table_delete+0x1a9/0x310
 [  523.462323]  inet_rtm_delroute+0x93/0x110
 [  523.462325]  rtnetlink_rcv_msg+0x133/0x370
 [  523.462327]  ? _copy_to_iter+0xb5/0x6f0
 [  523.462330]  ? rtnl_calcit.isra.0+0x110/0x110
 [  523.462331]  netlink_rcv_skb+0x50/0xf0
 [  523.462334]  netlink_unicast+0x211/0x330
 [  523.462336]  netlink_sendmsg+0x23f/0x480
 [  523.462338]  sock_sendmsg+0x5e/0x60
 [  523.462340]  ____sys_sendmsg+0x22c/0x270
 [  523.462341]  ? import_iovec+0x17/0x20
 [  523.462343]  ? sendmsg_copy_msghdr+0x59/0x90
 [  523.462344]  ? __mod_lruvec_page_state+0x85/0x110
 [  523.462348]  ___sys_sendmsg+0x81/0xc0
 [  523.462350]  ? netlink_seq_start+0x70/0x70
 [  523.462352]  ? __dentry_kill+0x13a/0x180
 [  523.462354]  ? __fput+0xff/0x250
 [  523.462356]  __sys_sendmsg+0x49/0x80
 [  523.462358]  do_syscall_64+0x3b/0x90
 [  523.462361]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [  523.462364] RIP: 0033:0x7f24552aa337
 [  523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 &lt;48&gt; 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 [  523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 [  523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337
 [  523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003
 [  523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
 [  523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001
 [  523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040
 [  523.462373]  &lt;/TASK&gt;
 [  523.462374] ---[ end trace ba537bc16f6bf4ed ]---

[2] https://github.com/FRRouting/frr/issues/6412

Fixes: 4c7e8084fd46 ("ipv4: Plumb support for nexthop object in a fib_info")
Signed-off-by: Nikolay Aleksandrov &lt;razor@blackwall.org&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
FRR folks have hit a kernel warning[1] while deleting routes[2] which is
caused by trying to delete a route pointing to a nexthop id without
specifying nhid but matching on an interface. That is, a route is found
but we hit a warning while matching it. The warning is from
fib_info_nh() in include/net/nexthop.h because we run it on a fib_info
with nexthop object. The call chain is:
 inet_rtm_delroute -&gt; fib_table_delete -&gt; fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning). The fix is to not do any
matching in that branch if the fi has a nexthop object because those are
managed separately. I.e. we should match when deleting without nh spec and
should fail when deleting a nexthop route with old-style nh spec because
nexthop objects are managed separately, e.g.:
 $ ip r show 1.2.3.4/32
 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0

 $ ip r del 1.2.3.4/32
 $ ip r del 1.2.3.4/32 nhid 12
 &lt;both should work&gt;

 $ ip r del 1.2.3.4/32 dev dummy0
 &lt;should fail with ESRCH&gt;

[1]
 [  523.462226] ------------[ cut here ]------------
 [  523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460
 [  523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd
 [  523.462274]  videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse
 [  523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P           OE     5.16.18-200.fc35.x86_64 #1
 [  523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020
 [  523.462303] RIP: 0010:fib_nh_match+0x210/0x460
 [  523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff &lt;0f&gt; 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00
 [  523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286
 [  523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0
 [  523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380
 [  523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000
 [  523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031
 [  523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0
 [  523.462311] FS:  00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000
 [  523.462313] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [  523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0
 [  523.462315] Call Trace:
 [  523.462316]  &lt;TASK&gt;
 [  523.462320]  fib_table_delete+0x1a9/0x310
 [  523.462323]  inet_rtm_delroute+0x93/0x110
 [  523.462325]  rtnetlink_rcv_msg+0x133/0x370
 [  523.462327]  ? _copy_to_iter+0xb5/0x6f0
 [  523.462330]  ? rtnl_calcit.isra.0+0x110/0x110
 [  523.462331]  netlink_rcv_skb+0x50/0xf0
 [  523.462334]  netlink_unicast+0x211/0x330
 [  523.462336]  netlink_sendmsg+0x23f/0x480
 [  523.462338]  sock_sendmsg+0x5e/0x60
 [  523.462340]  ____sys_sendmsg+0x22c/0x270
 [  523.462341]  ? import_iovec+0x17/0x20
 [  523.462343]  ? sendmsg_copy_msghdr+0x59/0x90
 [  523.462344]  ? __mod_lruvec_page_state+0x85/0x110
 [  523.462348]  ___sys_sendmsg+0x81/0xc0
 [  523.462350]  ? netlink_seq_start+0x70/0x70
 [  523.462352]  ? __dentry_kill+0x13a/0x180
 [  523.462354]  ? __fput+0xff/0x250
 [  523.462356]  __sys_sendmsg+0x49/0x80
 [  523.462358]  do_syscall_64+0x3b/0x90
 [  523.462361]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [  523.462364] RIP: 0033:0x7f24552aa337
 [  523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 &lt;48&gt; 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 [  523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 [  523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337
 [  523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003
 [  523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
 [  523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001
 [  523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040
 [  523.462373]  &lt;/TASK&gt;
 [  523.462374] ---[ end trace ba537bc16f6bf4ed ]---

[2] https://github.com/FRRouting/frr/issues/6412

Fixes: 4c7e8084fd46 ("ipv4: Plumb support for nexthop object in a fib_info")
Signed-off-by: Nikolay Aleksandrov &lt;razor@blackwall.org&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net</title>
<updated>2022-03-23T17:53:49+00:00</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2022-03-23T17:52:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=89695196f0ba78a17453f9616355f2ca6b293402'/>
<id>89695196f0ba78a17453f9616355f2ca6b293402</id>
<content type='text'>
Merge in overtime fixes, no conflicts.

Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Merge in overtime fixes, no conflicts.

Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next</title>
<updated>2022-03-22T18:18:49+00:00</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2022-03-22T17:36:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0db8640df59512dbd423c32077919f10cf35ebc6'/>
<id>0db8640df59512dbd423c32077919f10cf35ebc6</id>
<content type='text'>
Alexei Starovoitov says:

====================
pull-request: bpf-next 2022-03-21 v2

We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).

The main changes are:

1) Custom SEC() handling in libbpf, from Andrii.

2) subskeleton support, from Delyan.

3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.

4) Fix net.core.bpf_jit_harden race, from Hou.

5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.

6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.

7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.

8) Enable non-atomic allocations in local storage, from Joanne.

9) Various var_off ptr_to_btf_id fixed, from Kumar.

10) bpf_ima_file_hash helper, from Roberto.

11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  bpftool: Fix a bug in subskeleton code generation
  bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
  bpf: Fix bpf_prog_pack for multi-node setup
  bpf: Fix warning for cast from restricted gfp_t in verifier
  bpf, arm: Fix various typos in comments
  libbpf: Close fd in bpf_object__reuse_map
  bpftool: Fix print error when show bpf map
  bpf: Fix kprobe_multi return probe backtrace
  Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
  bpf: Simplify check in btf_parse_hdr()
  selftests/bpf/test_lirc_mode2.sh: Exit with proper code
  bpf: Check for NULL return from bpf_get_btf_vmlinux
  selftests/bpf: Test skipping stacktrace
  bpf: Adjust BPF stack helper functions to accommodate skip &gt; 0
  bpf: Select proper size for bpf_prog_pack
  ...
====================

Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Alexei Starovoitov says:

====================
pull-request: bpf-next 2022-03-21 v2

We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).

The main changes are:

1) Custom SEC() handling in libbpf, from Andrii.

2) subskeleton support, from Delyan.

3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.

4) Fix net.core.bpf_jit_harden race, from Hou.

5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.

6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.

7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.

8) Enable non-atomic allocations in local storage, from Joanne.

9) Various var_off ptr_to_btf_id fixed, from Kumar.

10) bpf_ima_file_hash helper, from Roberto.

11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  bpftool: Fix a bug in subskeleton code generation
  bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
  bpf: Fix bpf_prog_pack for multi-node setup
  bpf: Fix warning for cast from restricted gfp_t in verifier
  bpf, arm: Fix various typos in comments
  libbpf: Close fd in bpf_object__reuse_map
  bpftool: Fix print error when show bpf map
  bpf: Fix kprobe_multi return probe backtrace
  Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
  bpf: Simplify check in btf_parse_hdr()
  selftests/bpf/test_lirc_mode2.sh: Exit with proper code
  bpf: Check for NULL return from bpf_get_btf_vmlinux
  selftests/bpf: Test skipping stacktrace
  bpf: Adjust BPF stack helper functions to accommodate skip &gt; 0
  bpf: Select proper size for bpf_prog_pack
  ...
====================

Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: ensure PMTU updates are processed during fastopen</title>
<updated>2022-03-21T21:27:15+00:00</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2022-03-21T16:59:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=ed0c99dc0f499ff8b6e75b5ae6092ab42be1ad39'/>
<id>ed0c99dc0f499ff8b6e75b5ae6092ab42be1ad39</id>
<content type='text'>
tp-&gt;rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp-&gt;mss_cache is not updated, however:

tcp_v6_connect():
  tp-&gt;rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
  tcp_connect():
     tcp_connect_init():
       tp-&gt;mss_cache = min(mtu, tp-&gt;rx_opt.mss_clamp)
     tcp_send_syn_data():
       tp-&gt;rx_opt.mss_clamp = tp-&gt;advmss

After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp-&gt;mss_cache. Because of the stale
tp-&gt;mss_cache value PMTU updates during TFO are always dropped.

Thanks to Wei for helping zero in on the problem and the fix!

Fixes: c7bb4b89033b ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: Andre Nash &lt;alnash@fb.com&gt;
Reported-by: Neil Spring &lt;ntspring@fb.com&gt;
Reviewed-by: Wei Wang &lt;weiwan@google.com&gt;
Acked-by: Yuchung Cheng &lt;ycheng@google.com&gt;
Acked-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Link: https://lore.kernel.org/r/20220321165957.1769954-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
tp-&gt;rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp-&gt;mss_cache is not updated, however:

tcp_v6_connect():
  tp-&gt;rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
  tcp_connect():
     tcp_connect_init():
       tp-&gt;mss_cache = min(mtu, tp-&gt;rx_opt.mss_clamp)
     tcp_send_syn_data():
       tp-&gt;rx_opt.mss_clamp = tp-&gt;advmss

After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp-&gt;mss_cache. Because of the stale
tp-&gt;mss_cache value PMTU updates during TFO are always dropped.

Thanks to Wei for helping zero in on the problem and the fix!

Fixes: c7bb4b89033b ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: Andre Nash &lt;alnash@fb.com&gt;
Reported-by: Neil Spring &lt;ntspring@fb.com&gt;
Reviewed-by: Wei Wang &lt;weiwan@google.com&gt;
Acked-by: Yuchung Cheng &lt;ycheng@google.com&gt;
Acked-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Link: https://lore.kernel.org/r/20220321165957.1769954-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: nf_nat_h323: eliminate anonymous module_init &amp; module_exit</title>
<updated>2022-03-19T23:29:47+00:00</updated>
<author>
<name>Randy Dunlap</name>
<email>rdunlap@infradead.org</email>
</author>
<published>2022-03-16T19:20:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=fd4213929053bb58b0b2a080ca17f2dd1a9b6df4'/>
<id>fd4213929053bb58b0b2a080ca17f2dd1a9b6df4</id>
<content type='text'>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Fixes: f587de0e2feb ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Signed-off-by: Randy Dunlap &lt;rdunlap@infradead.org&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Fixes: f587de0e2feb ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Signed-off-by: Randy Dunlap &lt;rdunlap@infradead.org&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: nft_fib: add reduce support</title>
<updated>2022-03-19T23:29:47+00:00</updated>
<author>
<name>Florian Westphal</name>
<email>fw@strlen.de</email>
</author>
<published>2022-03-14T17:23:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=3c1eb413a45b6c6327fed394705081ec6202b31a'/>
<id>3c1eb413a45b6c6327fed394705081ec6202b31a</id>
<content type='text'>
The fib expression stores to a register, so we can't add empty stub.
Check that the register that is being written is in fact redundant.

In most cases, this is expected to cancel tracking as re-use is
unlikely.

Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The fib expression stores to a register, so we can't add empty stub.
Check that the register that is being written is in fact redundant.

In most cases, this is expected to cancel tracking as re-use is
unlikely.

Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: nf_tables: do not reduce read-only expressions</title>
<updated>2022-03-19T23:29:46+00:00</updated>
<author>
<name>Pablo Neira Ayuso</name>
<email>pablo@netfilter.org</email>
</author>
<published>2022-03-14T17:23:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b2d306542ff935a4edf7a88ba8145c108193442a'/>
<id>b2d306542ff935a4edf7a88ba8145c108193442a</id>
<content type='text'>
Skip register tracking for expressions that perform read-only operations
on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to
avoid defining stubs for these expressions.

This patch re-enables register tracking which was disabled in ed5f85d42290
("netfilter: nf_tables: disable register tracking"). Follow up patches
add remaining register tracking for existing expressions.

Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Skip register tracking for expressions that perform read-only operations
on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to
avoid defining stubs for these expressions.

This patch re-enables register tracking which was disabled in ed5f85d42290
("netfilter: nf_tables: disable register tracking"). Follow up patches
add remaining register tracking for existing expressions.

Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv4: Fix route lookups when handling ICMP redirects and PMTU updates</title>
<updated>2022-03-18T21:06:45+00:00</updated>
<author>
<name>Guillaume Nault</name>
<email>gnault@redhat.com</email>
</author>
<published>2022-03-17T12:45:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=544b4dd568e3b09c1ab38a759d3187e7abda11a0'/>
<id>544b4dd568e3b09c1ab38a759d3187e7abda11a0</id>
<content type='text'>
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set -&gt;flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of -&gt;flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
-&gt;flowi4_tos and initialises -&gt;flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.

Fix this by extracting the -&gt;flowi4_tos and -&gt;flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.

Note 1: We can't sanitise -&gt;flowi4_tos and -&gt;flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in -&gt;flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().

Note 2: The problem is mostly about sanitising -&gt;flowi4_tos. Having
-&gt;flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Guillaume Nault &lt;gnault@redhat.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set -&gt;flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of -&gt;flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
-&gt;flowi4_tos and initialises -&gt;flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.

Fix this by extracting the -&gt;flowi4_tos and -&gt;flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.

Note 1: We can't sanitise -&gt;flowi4_tos and -&gt;flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in -&gt;flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().

Note 2: The problem is mostly about sanitising -&gt;flowi4_tos. Having
-&gt;flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Guillaume Nault &lt;gnault@redhat.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: Add l3mdev index to flow struct and avoid oif reset for port devices</title>
<updated>2022-03-16T03:20:02+00:00</updated>
<author>
<name>David Ahern</name>
<email>dsahern@kernel.org</email>
</author>
<published>2022-03-14T20:45:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=40867d74c374b235e14d839f3a77f26684feefe5'/>
<id>40867d74c374b235e14d839f3a77f26684feefe5</id>
<content type='text'>
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.

In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:

1. l3mdev_fib_rule_match is only called when walking fib rules and
   always after l3mdev_update_flow. That allows an optimization to bail
   early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
   only that index needs to be checked for the FIB table id.

2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
   (e.g., VRF) device. By resetting flowi_oif only for this case the
   FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
   removing several checks in the datapath. The flowi_iif path can be
   simplified to only be called if the it is not loopback (loopback can
   not be assigned to an L3 domain) and the l3mdev index is not already
   set.

3. Avoid another device lookup in the output path when the fib lookup
   returns a reject failure.

Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:

    HINT: Fails since address on vrf device is out of device scope
    COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
    ping: Warning: source address might be selected on device other than: eth1
    PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.

    --- 172.16.3.1 ping statistics ---
    1 packets transmitted, 0 received, 100% packet loss, time 0ms

where the test now directly fails:

    HINT: Fails since address on vrf device is out of device scope
    COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
    ping: connect: No route to host

Signed-off-by: David Ahern &lt;dsahern@kernel.org&gt;
Tested-by: Ben Greear &lt;greearb@candelatech.com&gt;
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.

In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:

1. l3mdev_fib_rule_match is only called when walking fib rules and
   always after l3mdev_update_flow. That allows an optimization to bail
   early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
   only that index needs to be checked for the FIB table id.

2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
   (e.g., VRF) device. By resetting flowi_oif only for this case the
   FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
   removing several checks in the datapath. The flowi_iif path can be
   simplified to only be called if the it is not loopback (loopback can
   not be assigned to an L3 domain) and the l3mdev index is not already
   set.

3. Avoid another device lookup in the output path when the fib lookup
   returns a reject failure.

Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:

    HINT: Fails since address on vrf device is out of device scope
    COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
    ping: Warning: source address might be selected on device other than: eth1
    PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.

    --- 172.16.3.1 ping statistics ---
    1 packets transmitted, 0 received, 100% packet loss, time 0ms

where the test now directly fails:

    HINT: Fails since address on vrf device is out of device scope
    COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
    ping: connect: No route to host

Signed-off-by: David Ahern &lt;dsahern@kernel.org&gt;
Tested-by: Ben Greear &lt;greearb@candelatech.com&gt;
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf, sockmap: Fix double uncharge the mem of sk_msg</title>
<updated>2022-03-15T15:43:31+00:00</updated>
<author>
<name>Wang Yufen</name>
<email>wangyufen@huawei.com</email>
</author>
<published>2022-03-04T08:11:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=2486ab434b2c2a14e9237296db00b1e1b7ae3273'/>
<id>2486ab434b2c2a14e9237296db00b1e1b7ae3273</id>
<content type='text'>
If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.

tcp_bpf_sendmsg()
 tcp_bpf_send_verdict()
  sk_msg_return()
  tcp_bpf_sendmsg_redir()
   unlikely(!psock))
     sk_msg_free()

The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an error up to user space. This would be a
slight change in behavior from user side but would look the same as an
error if the redirect on the socket threw an error.

This issue can cause the following info:
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 &lt;TASK&gt;
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 &lt;/TASK&gt;

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen &lt;wangyufen@huawei.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Acked-by: John Fastabend &lt;john.fastabend@gmail.com&gt;
Link: https://lore.kernel.org/bpf/20220304081145.2037182-5-wangyufen@huawei.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.

tcp_bpf_sendmsg()
 tcp_bpf_send_verdict()
  sk_msg_return()
  tcp_bpf_sendmsg_redir()
   unlikely(!psock))
     sk_msg_free()

The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an error up to user space. This would be a
slight change in behavior from user side but would look the same as an
error if the redirect on the socket threw an error.

This issue can cause the following info:
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 &lt;TASK&gt;
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 &lt;/TASK&gt;

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen &lt;wangyufen@huawei.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Acked-by: John Fastabend &lt;john.fastabend@gmail.com&gt;
Link: https://lore.kernel.org/bpf/20220304081145.2037182-5-wangyufen@huawei.com
</pre>
</div>
</content>
</entry>
</feed>
