linux.git/net/ipv4, branch v4.19

net: ipmr: fix unresolved entry dumps

2018-10-18T05:35:42+00:00

If the skb space ends in an unresolved entry while dumping we'll miss
some unresolved entries. The reason is due to zeroing the entry counter
between dumping resolved and unresolved mfc entries. We should just
keep counting until the whole table is dumped and zero when we move to
the next as we have a separate table counter.

Reported-by: Colin Ian King 
Fixes: 8fb472c09b9d ("ipmr: improve hash scalability")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: ipv4: don't let PMTU updates increase route MTU

2018-10-11T05:44:46+00:00

When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is
received, we must clamp its value. However, we can receive a PMTU
exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an
increase in PMTU.

To fix this, take the smallest of the old MTU and ip_rt_min_pmtu.

Before this patch, in case of an update, the exception's MTU would
always change. Now, an exception can have only its lock flag updated,
but not the MTU, so we need to add a check on locking to the following
"is this exception getting updated, or close to expiring?" test.

Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu")
Signed-off-by: Sabrina Dubroca 
Reviewed-by: Stefano Brivio 
Signed-off-by: David S. Miller

net: ipv4: update fnhe_pmtu when first hop's MTU changes

2018-10-11T05:44:46+00:00

Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.

As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
 - if the local MTU is now lower than the PMTU, that PMTU is now
   incorrect
 - if the local MTU was the lowest value in the path, and is increased,
   we might discover a higher PMTU

Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those
cases.

If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.

To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.

Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca 
Reviewed-by: Stefano Brivio 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

udp: Unbreak modules that rely on external __skb_recv_udp() availability

2018-10-08T03:33:10+00:00

Commit 2276f58ac589 ("udp: use a separate rx queue for packet reception")
turned static inline __skb_recv_udp() from being a trivial helper around
__skb_recv_datagram() into a UDP specific implementaion, making it
EXPORT_SYMBOL_GPL() at the same time.

There are external modules that got broken by __skb_recv_udp() not being
visible to them. Let's unbreak them by making __skb_recv_udp EXPORT_SYMBOL().

Rationale (one of those) why this is actually "technically correct" thing
to do: __skb_recv_udp() used to be an inline wrapper around
__skb_recv_datagram(), which itself (still, and correctly so, I believe)
is EXPORT_SYMBOL().

Cc: Paolo Abeni 
Cc: Eric Dumazet 
Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Jiri Kosina 
Signed-off-by: David S. Miller

ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()

2018-10-03T05:32:05+00:00

Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.

Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet 
Cc: Willem de Bruijn 
Reported-by: syzbot 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller

inet: make sure to grab rcu_read_lock before using ireq->ireq_opt

2018-10-02T22:52:12+00:00

Timer handlers do not imply rcu_read_lock(), so my recent fix
triggered a LOCKDEP warning when SYNACK is retransmit.

Lets add rcu_read_lock()/rcu_read_unlock() pairs around ireq->ireq_opt
usages instead of guessing what is done by callers, since it is
not worth the pain.

Get rid of ireq_opt_deref() helper since it hides the logic
without real benefit, since it is now a standard rcu_dereference().

Fixes: 1ad98e9d1bdf ("tcp/dccp: fix lockdep issue when SYN is backlogged")
Signed-off-by: Eric Dumazet 
Reported-by: Willem de Bruijn 
Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

2018-10-02T05:29:25+00:00

Steffen Klassert says:

====================
pull request (net): ipsec 2018-10-01

1) Validate address prefix lengths in the xfrm selector,
   otherwise we may hit undefined behaviour in the
   address matching functions if the prefix is too
   big for the given address family.

2) Fix skb leak on local message size errors.
   From Thadeu Lima de Souza Cascardo.

3) We currently reset the transport header back to the network
   header after a transport mode transformation is applied. This
   leads to an incorrect transport header when multiple transport
   mode transformations are applied. Reset the transport header
   only after all transformations are already applied to fix this.
   From Sowmini Varadhan.

4) We only support one offloaded xfrm, so reset crypto_done after
   the first transformation in xfrm_input(). Otherwise we may call
   the wrong input method for subsequent transformations.
   From Sowmini Varadhan.

5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry.
   skb_dst_force does not really force a dst refcount anymore, it might
   clear it instead. xfrm code did not expect this, add a check to not
   dereference skb_dst() if it was cleared by skb_dst_force.

6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds
   read in xfrm_state_find. From Sean Tranchetti.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller

tcp/dccp: fix lockdep issue when SYN is backlogged

2018-10-01T22:42:13+00:00

In normal SYN processing, packets are handled without listener
lock and in RCU protected ingress path.

But syzkaller is known to be able to trick us and SYN
packets might be processed in process context, after being
queued into socket backlog.

In commit 06f877d613be ("tcp/dccp: fix other lockdep splats
accessing ireq_opt") I made a very stupid fix, that happened
to work mostly because of the regular path being RCU protected.

Really the thing protecting ireq->ireq_opt is RCU read lock,
and the pseudo request refcnt is not relevant.

This patch extends what I did in commit 449809a66c1d ("tcp/dccp:
block BH for SYN processing") by adding an extra rcu_read_{lock|unlock}
pair in the paths that might be taken when processing SYN from
socket backlog (thus possibly in process context)

Fixes: 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller

net-tcp: /proc/sys/net/ipv4/tcp_probe_interval is a u32 not int

2018-09-27T03:33:21+00:00

(fix documentation and sysctl access to treat it as such)

Tested:
  # zcat /proc/config.gz | egrep ^CONFIG_HZ
  CONFIG_HZ_1000=y
  CONFIG_HZ=1000
  # echo $[(1<<32)/1000 + 1] | tee /proc/sys/net/ipv4/tcp_probe_interval
  4294968
  tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument
  # echo $[(1<<32)/1000] | tee /proc/sys/net/ipv4/tcp_probe_interval
  4294967
  # echo 0 | tee /proc/sys/net/ipv4/tcp_probe_interval
  # echo -1 | tee /proc/sys/net/ipv4/tcp_probe_interval
  -1
  tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument

Signed-off-by: Maciej Żenczykowski 
Signed-off-by: David S. Miller

ip_tunnel: be careful when accessing the inner header

2018-09-24T19:27:04+00:00

Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6
("ip6_tunnel: be careful when accessing the inner header")
even for ipv4 tunnels.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Cong Wang 
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller