linux.git/net/ipv4, branch v4.0-rc2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-02-18T01:41:19+00:00

Pull networking updates from David Miller:

 1) Missing netlink attribute validation in nft_lookup, from Patrick
    McHardy.

 2) Restrict ipv6 partial checksum handling to UDP, since that's the
    only case it works for.  From Vlad Yasevich.

 3) Clear out silly device table sentinal macros used by SSB and BCMA
    drivers.  From Joe Perches.

 4) Make sure the remote checksum code never creates a situation where
    the remote checksum is applied yet the tunneling metadata describing
    the remote checksum transformation is still present.  Otherwise an
    external entity might see this and apply the checksum again.  From
    Tom Herbert.

 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire.

 6) Don't explicitly initialize timer struct fields, use setup_timer()
    and mod_timer() instead.  From Vaishali Thakkar.

 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi
    Nomura.

 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet.

 9) Don't potentially perform skb_get() on shared skbs, also from Eric
    Dumazet.

10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin
    KaFai Lau.

11) Fix merge resolution error between the iov_iter changes in vhost and
    some bug fixes that occurred at the same time.  From Jason Wang.

12) If rtnl_configure_link() fails we have to perform a call to
    ->dellink() before unregistering the device.  From WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits)
  net: dsa: Set valid phy interface type
  rtnetlink: call ->dellink on failure when ->newlink exists
  com20020-pci: add support for eae single card
  vhost_net: fix wrong iter offset when setting number of buffers
  net: spelling fixes
  net/core: Fix warning while make xmldocs caused by dev.c
  net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081
  ipv6: fix ipv6_cow_metrics for non DST_HOST case
  openvswitch: Fix key serialization.
  r8152: restore hw settings
  hso: fix rx parsing logic when skb allocation fails
  tcp: make sure skb is not shared before using skb_get()
  bridge: netfilter: Move sysctl-specific error code inside #ifdef
  ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc
  ipvlan: add a missing __percpu pcpu_stats
  tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one()
  bgmac: fix device initialization on Northstar SoCs (condition typo)
  qlcnic: Delete existing multicast MAC list before adding new
  net/mlx5_core: Fix configuration of log_uar_page_sz
  sunvnet: don't change gso data on clones
  ...

net: spelling fixes

2015-02-15T04:36:08+00:00

Spelling errors caught by codespell.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

tcp: make sure skb is not shared before using skb_get()

2015-02-13T15:11:40+00:00

IPv6 can keep a copy of SYN message using skb_get() in
tcp_v6_conn_request() so that caller wont free the skb when calling
kfree_skb() later.

Therefore TCP fast open has to clone the skb it is queuing in
child->sk_receive_queue, as all skbs consumed from receive_queue are
freed using __kfree_skb() (ie assuming skb->users == 1)

Signed-off-by: Eric Dumazet 
Signed-off-by: Yuchung Cheng 
Fixes: 5b7ed0892f2af ("tcp: move fastopen functions to tcp_fastopen.c")
Signed-off-by: David S. Miller

memcg: cleanup static keys decrement

2015-02-13T02:54:10+00:00

Move memcg_socket_limit_enabled decrement to tcp_destroy_cgroup (called
from memcg_destroy_kmem -> mem_cgroup_sockets_destroy) and zap a bunch of
wrapper functions.

Although this patch moves static keys decrement from __mem_cgroup_free to
mem_cgroup_css_free, it does not introduce any functional changes, because
the keys are incremented on setting the limit (tcp or kmem), which can
only happen after successful mem_cgroup_css_online.

Signed-off-by: Vladimir Davydov 
Cc: Glauber Costa 
Cc: KAMEZAWA Hiroyuki 
Cc: Eric W. Biederman 
Cc: David S. Miller 
Cc: Johannes Weiner 
Acked-by: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

2015-02-12T04:25:11+00:00

Pull security layer updates from James Morris:
 "Highlights:

   - Smack adds secmark support for Netfilter
   - /proc/keys is now mandatory if CONFIG_KEYS=y
   - TPM gets its own device class
   - Added TPM 2.0 support
   - Smack file hook rework (all Smack users should review this!)"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (64 commits)
  cipso: don't use IPCB() to locate the CIPSO IP option
  SELinux: fix error code in policydb_init()
  selinux: add security in-core xattr support for pstore and debugfs
  selinux: quiet the filesystem labeling behavior message
  selinux: Remove unused function avc_sidcmp()
  ima: /proc/keys is now mandatory
  Smack: Repair netfilter dependency
  X.509: silence asn1 compiler debug output
  X.509: shut up about included cert for silent build
  KEYS: Make /proc/keys unconditional if CONFIG_KEYS=y
  MAINTAINERS: email update
  tpm/tpm_tis: Add missing ifdef CONFIG_ACPI for pnp_acpi_device
  smack: fix possible use after frees in task_security() callers
  smack: Add missing logging in bidirectional UDS connect check
  Smack: secmark support for netfilter
  Smack: Rework file hooks
  tpm: fix format string error in tpm-chip.c
  char/tpm/tpm_crb: fix build error
  smack: Fix a bidirectional UDS connect check typo
  smack: introduce a special case for tmpfs in smack_d_instantiate()
  ...

mm: page_counter: pull "-1" handling out of page_counter_memparse()

2015-02-12T01:06:02+00:00

The unified hierarchy interface for memory cgroups will no longer use "-1"
to mean maximum possible resource value.  In preparation for this, make
the string an argument and let the caller supply it.

Signed-off-by: Johannes Weiner 
Acked-by: Michal Hocko 
Cc: Vladimir Davydov 
Cc: Greg Thelen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

gue: Use checksum partial with remote checksum offload

2015-02-11T23:12:13+00:00

Change remote checksum handling to set checksum partial as default
behavior. Added an iflink parameter to configure not using
checksum partial (calling csum_partial to update checksum).

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net: Infrastructure for CHECKSUM_PARTIAL with remote checsum offload

2015-02-11T23:12:12+00:00

This patch adds infrastructure so that remote checksum offload can
set CHECKSUM_PARTIAL instead of calling csum_partial and writing
the modfied checksum field.

Add skb_remcsum_adjust_partial function to set an skb for using
CHECKSUM_PARTIAL with remote checksum offload.  Changed
skb_remcsum_process and skb_gro_remcsum_process to take a boolean
argument to indicate if checksum partial can be set or the
checksum needs to be modified using the normal algorithm.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

udp: Set SKB_GSO_UDP_TUNNEL* in UDP GRO path

2015-02-11T23:12:10+00:00

Properly set GSO types and skb->encapsulation in the UDP tunnel GRO
complete so that packets are properly represented for GSO. This sets
SKB_GSO_UDP_TUNNEL or SKB_GSO_UDP_TUNNEL_CSUM depending on whether
non-zero checksums were received, and sets SKB_GSO_TUNNEL_REMCSUM if
the remote checksum option was processed.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net: Fix remcsum in GRO path to not change packet

2015-02-11T23:12:09+00:00

Remote checksum offload processing is currently the same for both
the GRO and non-GRO path. When the remote checksum offload option
is encountered, the checksum field referred to is modified in
the packet. So in the GRO case, the packet is modified in the
GRO path and then the operation is skipped when the packet goes
through the normal path based on skb->remcsum_offload. There is
a problem in that the packet may be modified in the GRO path, but
then forwarded off host still containing the remote checksum option.
A remote host will again perform RCO but now the checksum verification
will fail since GRO RCO already modified the checksum.

To fix this, we ensure that GRO restores a packet to it's original
state before returning. In this model, when GRO processes a remote
checksum option it still changes the checksum per the algorithm
but on return from lower layer processing the checksum is restored
to its original value.

In this patch we add define gro_remcsum structure which is passed
to skb_gro_remcsum_process to save offset and delta for the checksum
being changed. After lower layer processing, skb_gro_remcsum_cleanup
is called to restore the checksum before returning from GRO.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller