linux.git/net/ipv4, branch v3.15-rc2

ip_tunnel: use the right netns in ioctl handler

2014-04-16T19:16:02+00:00

Because the netdevice may be in another netns than the i/o netns, we should
use the i/o netns instead of dev_net(dev).

The variable 'tunnel' was used only to get 'itn', hence to simplify code I
remove it and use 't' instead.

Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller

ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source()

2014-04-16T19:05:12+00:00

In my special case, when a packet is redirected from veth0 to lo,
its skb->dev->ifindex would be LOOPBACK_IFINDEX. Meanwhile we
pass the hard-coded LOOPBACK_IFINDEX to fib_validate_source()
in ip_route_input_slow(). This would cause the following check
in fib_validate_source() fail:

            (dev->ifindex != oif || !IN_DEV_TX_REDIRECTS(idev))

when rp_filter is disabeld on loopback. As suggested by Julian,
the caller should pass 0 here so that we will not end up by
calling __fib_validate_source().

Cc: Eric Biederman 
Cc: Julian Anastasov 
Cc: David S. Miller 
Signed-off-by: Cong Wang 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif

2014-04-16T19:05:11+00:00

As suggested by Julian:

	Simply, flowi4_iif must not contain 0, it does not
	look logical to ignore all ip rules with specified iif.

because in fib_rule_match() we do:

        if (rule->iifindex && (rule->iifindex != fl->flowi_iif))
                goto out;

flowi4_iif should be LOOPBACK_IFINDEX by default.

We need to move LOOPBACK_IFINDEX to include/net/flow.h:

1) It is mostly used by flowi_iif

2) Fix the following compile error if we use it in flow.h
by the patches latter:

In file included from include/linux/netfilter.h:277:0,
                 from include/net/netns/netfilter.h:5,
                 from include/net/net_namespace.h:21,
                 from include/linux/netdevice.h:43,
                 from include/linux/icmpv6.h:12,
                 from include/linux/ipv6.h:61,
                 from include/net/ipv6.h:16,
                 from include/linux/sunrpc/clnt.h:27,
                 from include/linux/nfs_fs.h:30,
                 from init/do_mounts.c:32:
include/net/flow.h: In function ‘flowi4_init_output’:
include/net/flow.h:84:32: error: ‘LOOPBACK_IFINDEX’ undeclared (first use in this function)

Cc: Eric Biederman 
Cc: Julian Anastasov 
Cc: David S. Miller 
Signed-off-by: Cong Wang 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

ipv4: add a sock pointer to dst->output() path.

2014-04-15T17:47:15+00:00

In the dst->output() path for ipv4, the code assumes the skb it has to
transmit is attached to an inet socket, specifically via
ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the
provider of the packet is an AF_PACKET socket.

The dst->output() method gets an additional 'struct sock *sk'
parameter. This needs a cascade of changes so that this parameter can
be propagated from vxlan to final consumer.

Fixes: 8f646c922d55 ("vxlan: keep original skb ownership")
Reported-by: lucien xin 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

ipv4: add a sock pointer to ip_queue_xmit()

2014-04-15T16:58:34+00:00

ip_queue_xmit() assumes the skb it has to transmit is attached to an
inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership")
changed l2tp to not change skb ownership and thus broke this assumption.

One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(),
so that we do not assume skb->sk points to the socket used by l2tp
tunnel.

Fixes: 31c70d5956fc ("l2tp: keep original skb ownership")
Reported-by: Zhan Jianyu 
Tested-by: Zhan Jianyu 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

ipv4: return valid RTA_IIF on ip route get

2014-04-14T03:23:41+00:00

Extend commit 13378cad02afc2adc6c0e07fca03903c7ada0b37
("ipv4: Change rt->rt_iif encoding.") from 3.6 to return valid
RTA_IIF on 'ip route get ... iif DEVICE' instead of rt_iif 0
which is displayed as 'iif *'.

inet_iif is not appropriate to use because skb_iif is not set.
Use the skb->dev->ifindex instead.

Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller

net: ipv4: current group_info should be put after using.

2014-04-14T02:52:58+00:00

Plug a group_info refcount leak in ping_init.
group_info is only needed during initialization and
the code failed to release the reference on exit.
While here move grabbing the reference to a place
where it is actually needed.

Signed-off-by: Chuansheng Liu 
Signed-off-by: Zhang Dongxing 
Signed-off-by: xiaoming wang 
Signed-off-by: David S. Miller

vti: don't allow to add the same tunnel twice

2014-04-12T21:03:11+00:00

Before the patch, it was possible to add two times the same tunnel:
ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41
ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41

It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the
argument dev->type, which was set only later (when calling ndo_init handler
in register_netdevice()). Let's set this type in the setup handler, which is
called before newlink handler.

Introduced by commit b9959fd3b0fa ("vti: switch to new ip tunnel code").

CC: Cong Wang 
CC: Steffen Klassert 
Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller

gre: don't allow to add the same tunnel twice

2014-04-12T21:03:11+00:00

Before the patch, it was possible to add two times the same tunnel:
ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249
ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249

It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the
argument dev->type, which was set only later (when calling ndo_init handler
in register_netdevice()). Let's set this type in the setup handler, which is
called before newlink handler.

Introduced by commit c54419321455 ("GRE: Refactor GRE tunneling code.").

CC: Pravin B Shelar 
Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller

net: Fix use after free by removing length arg from sk_data_ready callbacks.

2014-04-11T20:15:36+00:00

Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.

Signed-off-by: David S. Miller