sk->sk_tsflags can be read locklessly, add corresponding annotations.

Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit edf391ff1723 ("snmp: add missing counters for RFC 4293") had
already added OutOctets for RFC 4293. In commit 2d8dbb04c63e ("snmp: fix
OutOctets counter to include forwarded datagrams"), OutOctets was
counted again, but not removed from ip_output().

According to RFC 4293 "3.2.3. IP Statistics Tables",
ipipIfStatsOutTransmits is not equal to ipIfStatsOutForwDatagrams. So
"IPSTATS_MIB_OUTOCTETS must be incremented when incrementing" is not
accurate. And IPSTATS_MIB_OUTOCTETS should be counted after fragment.

This patch reverts commit 2d8dbb04c63e ("snmp: fix OutOctets counter to
include forwarded datagrams") and move IPSTATS_MIB_OUTOCTETS to
ip_finish_output2 for ipv4.

Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Signed-off-by: Heng Guo <heng.guo@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2,
such that any positive return value from a xmit hook could cause
unexpected continue behavior, despite that related skb may have been
freed. This could be error-prone for future xmit hook ops. One of the
possible errors is to return statuses of dst_output directly.

To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to
distinguish from dst_output statuses and check the continue
condition explicitly.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/96b939b85eda00e8df4f7c080f770970a4c5f698.1692326837.git.yan@cloudflare.com

ip_select_ttl() is racy, because it reads inet->uc_ttl
without proper locking.

Add READ_ONCE()/WRITE_ONCE() annotations while
allowing IP_TTL socket option to be set/read without
holding the socket lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IP_HDRINCL socket option can now be set/read
without locking the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For now, No matter what error pointer ip_neigh_for_gw() returns,
ip_finish_output2() always return -EINVAL, which may mislead the upper
users.

For exemple, an application uses sendto to send an UDP packet, but when the
neighbor table overflows, sendto() will get a value of -EINVAL, and it will
cause users to waste a lot of time checking parameters for errors.

Return the real errno instead of -EINVAL.

Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Si Hao <si.hao@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20230807015408.248237-1-xu.xin16@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

__ip_append_data() can get into an infinite loop when asked to splice into
a partially-built UDP message that has more than the frag-limit data and up
to the MTU limit.  Something like:

        pipe(pfd);
        sfd = socket(AF_INET, SOCK_DGRAM, 0);
        connect(sfd, ...);
        send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE);
        write(pfd[1], buffer, 8);
        splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0);

where the amount of data given to send() is dependent on the MTU size (in
this instance an interface with an MTU of 8192).

The problem is that the calculation of the amount to copy in
__ip_append_data() goes negative in two places, and, in the second place,
this gets subtracted from the length remaining, thereby increasing it.

This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and
MSG_SPLICE_PAGES), because the terms in:

        copy = datalen - transhdrlen - fraggap - pagedlen;

then mostly cancel when pagedlen is substituted for, leaving just -fraggap.
This causes:

        length -= copy + transhdrlen;

to increase the length to more than the amount of data in msg->msg_iter,
which causes skb_splice_from_iter() to be unable to fill the request and it
returns less than 'copied' - which means that length never gets to 0 and we
never exit the loop.

Fix this by:

 (1) Insert a note about the dodgy calculation of 'copy'.

 (2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above
     equation, so that 'offset' isn't regressed and 'length' isn't
     increased, which will mean that length and thus copy should match the
     amount left in the iterator.

 (3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if
     we're asked to splice more than is in the iterator.  It might be
     better to not give the warning or even just give a 'short' write.

[!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY
avoids the problem by simply assuming that everything asked for got copied,
not just the amount that was in the iterator.  This is a potential bug for
the future.

Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES")
Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sk_getsockopt() runs locklessly. This means sk->sk_priority
can be read while other threads are changing its value.

Other reads also happen without socket lock being held.

Add missing annotations where needed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk->sk_mark is often read while another thread could change the value.

Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Splicing to SOCK_RAW sockets may set MSG_SPLICE_PAGES, but in such a case,
__ip_append_data() will call skb_splice_from_iter() to access the 'from'
data, assuming it to point to a msghdr struct with an iter, instead of
using the provided getfrag function to access it.

In the case of raw_sendmsg(), however, this is not the case and 'from' will
point to a raw_frag_vec struct and raw_getfrag() will be the frag-getting
function.  A similar issue may occur with rawv6_sendmsg().

Fix this by ignoring MSG_SPLICE_PAGES if getfrag != ip_generic_getfrag as
ip_generic_getfrag() expects "from" to be a msghdr*, but the other getfrags
don't.  Note that this will prevent MSG_SPLICE_PAGES from being effective
for udplite.

This likely affects ping sockets too.  udplite looks like it should be okay
as it expects "from" to be a msghdr.

Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: syzbot+d8486855ef44506fd675@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000ae4cbf05fdeb8349@google.com/
Fixes: 2dc334f1a63a ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()")
Tested-by: syzbot+d8486855ef44506fd675@syzkaller.appspotmail.com
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1410156.1686729856@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>