linux.git/net/ipv4/arp.c, branch v2.6.24

[IPV4] ARP: Remove not used code

2007-12-20T07:38:11+00:00

In arp_process() (net/ipv4/arp.c), there is unused code: definition
and assignment of tha (target hw address ).

Signed-off-by: Mark Ryden 
Signed-off-by: David S. Miller

[IPV4]: Remove bogus ifdef mess in arp_process

2007-11-26T15:17:53+00:00

The #ifdef's in arp_process() were not only a mess, they were also wrong 
in the CONFIG_NET_ETHERNET=n and (CONFIG_NETDEV_1000=y or 
CONFIG_NETDEV_10000=y) cases.

Since they are not required this patch removes them.

Also removed are some #ifdef's around #include's that caused compile 
errors after this change.

Signed-off-by: Adrian Bunk 
Signed-off-by: Herbert Xu

[ARP]: Fix arp reply when sender ip 0

2007-11-21T01:38:16+00:00

Fix arp reply when received arp probe with sender ip 0.

Send arp reply with target ip address 0.0.0.0 and target hardware
address set to hardware address of requester. Previously sent reply
with target ip address and target hardware address set to same as
source fields.

Signed-off-by: Jonas Danielsson 
Acked-by: Alexey Kuznetov 
Signed-off-by: David S. Miller

[NET]: Make core networking code use seq_open_private

2007-10-10T23:55:33+00:00

This concerns the ipv4 and ipv6 code mostly, but also the netlink
and unix sockets.

The netlink code is an example of how to use the __seq_open_private()
call - it saves the net namespace on this private.

Signed-off-by: Pavel Emelyanov 
Signed-off-by: David S. Miller

[NET]: Move hardware header operations out of netdevice.

2007-10-10T23:52:52+00:00

Since hardware header operations are part of the protocol class
not the device instance, make them into a separate object and
save memory.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

[NET]: Wrap netdevice hardware header creation.

2007-10-10T23:52:50+00:00

Add inline for common usage of hardware header creation, and
fix bug in IPV6 mcast where the assumption about negative return is
an errno. Negative return from hard_header means not enough space
was available,(ie -N bytes).

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

[NET]: Make the device list and device lookups per namespace.

2007-10-10T23:49:10+00:00

This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.

Signed-off-by: Eric W. Biederman 
Signed-off-by: David S. Miller

[NET]: Make device event notification network namespace safe

2007-10-10T23:49:09+00:00

Every user of the network device notifiers is either a protocol
stack or a pseudo device.  If a protocol stack that does not have
support for multiple network namespaces receives an event for a
device that is not in the initial network namespace it quite possibly
can get confused and do the wrong thing.

To avoid problems until all of the protocol stacks are converted
this patch modifies all netdev event handlers to ignore events on
devices that are not in the initial network namespace.

As the rest of the code is made network namespace aware these
checks can be removed.

Signed-off-by: Eric W. Biederman 
Signed-off-by: David S. Miller

[NET]: Make packet reception network namespace safe

2007-10-10T23:49:08+00:00

This patch modifies every packet receive function
registered with dev_add_pack() to drop packets if they
are not from the initial network namespace.

This should ensure that the various network stacks do
not receive packets in a anything but the initial network
namespace until the code has been converted and is ready
for them.

Signed-off-by: Eric W. Biederman 
Signed-off-by: David S. Miller

[NET]: Make /proc/net per network namespace

2007-10-10T23:49:06+00:00

This patch makes /proc/net per network namespace.  It modifies the global
variables proc_net and proc_net_stat to be per network namespace.
The proc_net file helpers are modified to take a network namespace argument,
and all of their callers are fixed to pass &init_net for that argument.
This ensures that all of the /proc/net files are only visible and
usable in the initial network namespace until the code behind them
has been updated to be handle multiple network namespaces.

Making /proc/net per namespace is necessary as at least some files
in /proc/net depend upon the set of network devices which is per
network namespace, and even more files in /proc/net have contents
that are relevant to a single network namespace.

Signed-off-by: Eric W. Biederman 
Signed-off-by: David S. Miller