linux.git/net/ipv4/Makefile, branch v2.6.17

[INET]: Introduce tunnel4/tunnel6

2006-03-29T01:02:46+00:00

Basically this patch moves the generic tunnel protocol stuff out of
xfrm4_tunnel/xfrm6_tunnel and moves it into the new files of tunnel4.c
and tunnel6 respectively.

The reason for this is that the problem that Hugo uncovered is only
the tip of the iceberg.  The real problem is that when we removed the
dependency of ipip on xfrm4_tunnel we didn't really consider the module
case at all.

For instance, as it is it's possible to build both ipip and xfrm4_tunnel
as modules and if the latter is loaded then ipip simply won't load.

After considering the alternatives I've decided that the best way out of
this is to restore the dependency of ipip on the non-xfrm-specific part
of xfrm4_tunnel.  This is acceptable IMHO because the intention of the
removal was really to be able to use ipip without the xfrm subsystem.
This is still preserved by this patch.

So now both ipip/xfrm4_tunnel depend on the new tunnel4.c which handles
the arbitration between the two.  The order of processing is determined
by a simple integer which ensures that ipip gets processed before
xfrm4_tunnel.

The situation for ICMP handling is a little bit more complicated since
we may not have enough information to determine who it's for.  It's not
a big deal at the moment since the xfrm ICMP handlers are basically
no-ops.  In future we can deal with this when we look at ICMP caching
in general.

The user-visible change to this is the removal of the TUNNEL Kconfig
prompts.  This makes sense because it can only be used through IPCOMP
as it stands.

The addition of the new modules shouldn't introduce any problems since
module dependency will cause them to be loaded.

Oh and I also turned some unnecessary pskb's in IPv6 related to this
patch to skb's.

Signed-off-by: Herbert Xu 
Signed-off-by: David S. Miller

[NETFILTER]: net/ipv[46]/netfilter.c cleanups

2006-01-10T20:54:29+00:00

Don't wrap entire file in #ifdef CONFIG_NETFILTER, remove a few
unneccessary includes.

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller

[TCP] BIC: CUBIC window growth (2.0)

2006-01-03T21:10:28+00:00

Replace existing BIC version 1.1 with new version 2.0.
The main change is to replace the window growth function
with a cubic function as described in:
  http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

[INET_DIAG]: Move the tcp_diag interface to the proper place

2005-08-29T22:57:54+00:00

With this the previous setup is back, i.e. tcp_diag can be built as a module,
as dccp_diag and both share the infrastructure available in inet_diag.

If one selects CONFIG_INET_DIAG as module CONFIG_INET_TCP_DIAG will also be
built as a module, as will CONFIG_INET_DCCP_DIAG, if CONFIG_IP_DCCP was
selected static or as a module, if CONFIG_INET_DIAG is y, being statically
linked CONFIG_INET_TCP_DIAG will follow suit and CONFIG_INET_DCCP_DIAG will be
built in the same manner as CONFIG_IP_DCCP.

Now to aim at UDP, converting it to use inet_hashinfo, so that we can use
iproute2 for UDP sockets as well.

Ah, just to show an example of this new infrastructure working for DCCP :-)

[root@qemu ~]# ./ss -dane
State      Recv-Q Send-Q Local Address:Port  Peer Address:Port
LISTEN     0      0                  *:5001             *:*     ino:942 sk:cfd503a0
ESTAB      0      0          127.0.0.1:5001     127.0.0.1:32770 ino:943 sk:cfd50a60
ESTAB      0      0          127.0.0.1:32770    127.0.0.1:5001  ino:947 sk:cfd50700
TIME-WAIT  0      0          127.0.0.1:32769    127.0.0.1:5001  timer:(timewait,3.430ms,0) ino:0 sk:cf209620

Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller

[INET_DIAG]: Rename tcp_diag.[ch] to inet_diag.[ch]

2005-08-29T22:57:48+00:00

Next changeset will introduce net/ipv4/tcp_diag.c, moving the code that was put
transitioanlly in inet_diag.c.

Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller

[TCPDIAG]: Just rename everything to inet_diag

2005-08-29T22:57:44+00:00

Next changeset will rename tcp_diag.[ch] to inet_diag.[ch].

I'm taking this longer route so as to easy review, making clear the changes
made all along the way.

Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller

[NET]: Just move the inet_connection_sock function from tcp sources

2005-08-29T22:49:14+00:00

Completing the previous changeset, this also generalises tcp_v4_synq_add,
renaming it to inet_csk_reqsk_queue_hash_add, already geing used in the
DCCP tree, which I plan to merge RSN.

Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller

[INET]: Generalise the TCP sock ID lookup routines

2005-08-29T22:42:18+00:00

And also some TIME_WAIT functions.

[acme@toy net-2.6.14]$ grep built-in /tmp/before.size /tmp/after.size
/tmp/before.size: 282955   13122    9312  305389   4a8ed net/ipv4/built-in.o
/tmp/after.size:  281566   13122    9312  304000   4a380 net/ipv4/built-in.o
[acme@toy net-2.6.14]$

I kept them still inlined, will uninline at some point to see what
would be the performance difference.

Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller

[INET]: Move the TCP hashtable functions/structs to inet_hashtables.[ch]

2005-08-29T22:38:39+00:00

Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller

[NETFILTER]: Move ipv4 specific code from net/core/netfilter.c to net/ipv4/netfilter.c

2005-08-29T22:35:01+00:00

Netfilter cleanup
- Move ipv4 code from net/core/netfilter.c to net/ipv4/netfilter.c
- Move ipv6 netfilter code from net/ipv6/ip6_output.c to net/ipv6/netfilter.c

Signed-off-by: Harald Welte 
Signed-off-by: David S. Miller