linux.git/net/hsr, branch v5.15

net: hsr: don't check sequence number if tag removal is offloaded

2021-06-16T19:13:01+00:00

Don't check the sequence number when deciding when to update time_in in
the node table if tag removal is offloaded since the sequence number is
part of the tag. This fixes a problem where the times in the node table
wouldn't update when 0 appeared to be before or equal to seq_out when
tag removal was offloaded.

Signed-off-by: George McCollister 
Signed-off-by: David S. Miller

net: hsr: fix mac_len checks

2021-05-24T21:10:28+00:00

Commit 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr
in fill_frame_info") added the following which resulted in -EINVAL
always being returned:
	if (skb->mac_len < sizeof(struct hsr_ethhdr))
		return -EINVAL;

mac_len was not being set correctly so this check completely broke
HSR/PRP since it was always 14, not 20.

Set mac_len correctly and modify the mac_len checks to test in the
correct places since sometimes it is legitimately 14.

Fixes: 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info")
Signed-off-by: George McCollister 
Signed-off-by: David S. Miller

net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info

2021-05-03T20:33:54+00:00

Check at start of fill_frame_info that the MAC header in the supplied
skb is large enough to fit a struct hsr_ethhdr, as otherwise this is
not a valid HSR frame. If it is too small, return an error which will
then cause the callers to clean up the skb. Fixes a KMSAN-found
uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=f7e9b601f1414f814f7602a82b6619a8d80bce3f

Reported-by: syzbot+e267bed19bfc5478fb33@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-04-10T03:48:35+00:00

Conflicts:

MAINTAINERS
 - keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
 - simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
 - trivial
include/linux/ethtool.h
 - trivial, fix kdoc while at it
include/linux/skmsg.h
 - move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
 - add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
 - trivial

Signed-off-by: Jakub Kicinski

net: hsr: Reset MAC header for Tx path

2021-04-07T21:25:12+00:00

Reset MAC header in HSR Tx path. This is needed, because direct packet
transmission, e.g. by specifying PACKET_QDISC_BYPASS does not reset the MAC
header.

This has been observed using the following setup:

|$ ip link add name hsr0 type hsr slave1 lan0 slave2 lan1 supervision 45 version 1
|$ ifconfig hsr0 up
|$ ./test hsr0

The test binary is using mmap'ed sockets and is specifying the
PACKET_QDISC_BYPASS socket option.

This patch resolves the following warning on a non-patched kernel:

|[  112.725394] ------------[ cut here ]------------
|[  112.731418] WARNING: CPU: 1 PID: 257 at net/hsr/hsr_forward.c:560 hsr_forward_skb+0x484/0x568
|[  112.739962] net/hsr/hsr_forward.c:560: Malformed frame (port_src hsr0)

The warning can be safely removed, because the other call sites of
hsr_forward_skb() make sure that the skb is prepared correctly.

Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Kurt Kanzenbach 
Reviewed-by: Eric Dumazet 
Signed-off-by: David S. Miller

/net/hsr: fix misspellings using codespell tool

2021-03-19T02:13:41+00:00

A typo is found out by codespell tool in 111th line of hsr_debugfs.c:

$ codespell ./net/hsr/

net/hsr/hsr_debugfs.c:111: Debufs  ==> Debugfs

Fix typos found by codespell.

Signed-off-by: Xiong Zhenwu 
Signed-off-by: David S. Miller

net: hsr: add support for EntryForgetTime

2021-02-25T17:41:51+00:00

In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When a
node does not send any frame within this time, the sequence number check
for can be ignored. This solves communication issues with Cisco IE 2000
in Redbox mode.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Marco Wenzel 
Reviewed-by: George McCollister 
Tested-by: George McCollister 
Reviewed-by: Andrew Lunn 
Link: https://lore.kernel.org/r/20210224094653.1440-1-marco.wenzel@a-eberle.de
Signed-off-by: Jakub Kicinski

net: hsr: add offloading support

2021-02-11T21:24:44+00:00

Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding.

For HSR, insertion involves the switch adding a 6 byte HSR header after
the 14 byte Ethernet header. For PRP it adds a 6 byte trailer.

Tag removal involves automatically stripping the HSR/PRP header/trailer
in the switch. This is possible when the switch also performs auto
deduplication using the HSR/PRP header/trailer (making it no longer
required).

Forwarding involves automatically forwarding between redundant ports in
an HSR. This is crucial because delay is accumulated as a frame passes
through each node in the ring.

Duplication involves the switch automatically sending a single frame
from the CPU port to both redundant ports. This is required because the
inserted HSR/PRP header/trailer must contain the same sequence number
on the frames sent out both redundant ports.

Export is_hsr_master so DSA can tell them apart from other devices in
dsa_slave_changeupper.

Signed-off-by: George McCollister 
Reviewed-by: Vladimir Oltean 
Signed-off-by: David S. Miller

net: hsr: generate supervision frame without HSR/PRP tag

2021-02-11T21:24:44+00:00

For a switch to offload insertion of HSR/PRP tags, frames must not be
sent to the CPU facing switch port with a tag. Generate supervision frames
(eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on
create_tagged_frame which inserts it later. This will allow skipping the
tag insertion for all outgoing frames in the future which is required for
HSR v1/PRP tag insertions to be offloaded.

HSR v0 supervision frames always contain tag information so insertion of
the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically
notes that this was changed since v0 to allow offloading.

Signed-off-by: George McCollister 
Reviewed-by: Vladimir Oltean 
Tested-by: Vladimir Oltean 
Signed-off-by: David S. Miller

net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary

2021-02-02T16:57:18+00:00

sup_multicast_addr is passed to ether_addr_equal for address comparison
which casts the address inputs to u16 leading to an unaligned access.
Aligning the sup_multicast_addr to u16 boundary fixes the issue.

Signed-off-by: Andreas Oetken 
Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.com
Signed-off-by: Jakub Kicinski