linux.git/net/hsr, branch v4.11

net/hsr: use eth_hw_addr_random()

2017-02-21T18:25:22+00:00

Use eth_hw_addr_random() to set a random MAC address in order to make sure
dev->addr_assign_type will be properly set to NET_ADDR_RANDOM.

Signed-off-by: Tobias Klauser 
Signed-off-by: David S. Miller

net-next: treewide use is_vlan_dev() helper function.

2017-02-06T21:33:29+00:00

This patch makes use of is_vlan_dev() function instead of flag
comparison which is exactly done by is_vlan_dev() helper function.

Signed-off-by: Parav Pandit 
Reviewed-by: Daniel Jurgens 
Acked-by: Stephen Hemminger 
Acked-by: Jon Maxwell 
Acked-by: Johannes Thumshirn 
Acked-by: Haiyang Zhang 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-10-30T16:42:58+00:00

Mostly simple overlapping changes.

For example, David Ahern's adjacency list revamp in 'net-next'
conflicted with an adjacency list traversal bug fix in 'net'.

Signed-off-by: David S. Miller

genetlink: mark families as __ro_after_init

2016-10-27T20:16:09+00:00

Now genl_register_family() is the only thing (other than the
users themselves, perhaps, but I didn't find any doing that)
writing to the family struct.

In all families that I found, genl_register_family() is only
called from __init functions (some indirectly, in which case
I've add __init annotations to clarifly things), so all can
actually be marked __ro_after_init.

This protects the data structure from accidental corruption.

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

genetlink: statically initialize families

2016-10-27T20:16:09+00:00

Instead of providing macros/inline functions to initialize
the families, make all users initialize them statically and
get rid of the macros.

This reduces the kernel code size by about 1.6k on x86-64
(with allyesconfig).

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

genetlink: no longer support using static family IDs

2016-10-27T20:16:09+00:00

Static family IDs have never really been used, the only
use case was the workaround I introduced for those users
that assumed their family ID was also their multicast
group ID.

Additionally, because static family IDs would never be
reserved by the generic netlink code, using a relatively
low ID would only work for built-in families that can be
registered immediately after generic netlink is started,
which is basically only the control family (apart from
the workaround code, which I also had to add code for so
it would reserve those IDs)

Thus, anything other than GENL_ID_GENERATE is flawed and
luckily not used except in the cases I mentioned. Move
those workarounds into a few lines of code, and then get
rid of GENL_ID_GENERATE entirely, making it more robust.

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

net: use core MTU range checking in misc drivers

2016-10-20T18:51:10+00:00

firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu

nes:
- set max_mtu
- clean up nes_netdev_change_mtu

xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu

hippi:
- set min/max_mtu
- remove hippi_change_mtu

batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with

rionet:
- set min/max_mtu
- remove rionet_change_mtu

slip:
- set min/max_mtu
- streamline sl_change_mtu

um/net_kern:
- remove pointless ndo_change_mtu

hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu

ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
  connected mode or not, so we'll just set the max_mtu value to the max
  possible, and let the ndo_change_mtu function continue to validate any new
  MTU change requests with checks for CM or not. Note that ipoib has no
  min_mtu set, and thus, the network core's mtu > 0 check is the only lower
  bounds here.

mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu

fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)

fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
  get past the core net MTU range checks so fjes_change_mtu can validate a
  new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)

f_phonet:
- min_mtu = 6, max_mtu = 65541

u_ether:
- min_mtu = 14, max_mtu = 15412

phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu

CC: netdev@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: Stefan Richter 
CC: Faisal Latif 
CC: linux-rdma@vger.kernel.org
CC: Cliff Whickman 
CC: Robin Holt 
CC: Jes Sorensen 
CC: Marek Lindner 
CC: Simon Wunderlich 
CC: Antonio Quartulli 
CC: Sathya Prakash 
CC: Chaitra P B 
CC: Suganath Prabu Subramani 
CC: MPT-FusionLinux.pdl@broadcom.com
CC: Sebastian Reichel 
CC: Felipe Balbi 
CC: Arvid Brodin 
CC: Remi Denis-Courmont 
Signed-off-by: Jarod Wilson 
Signed-off-by: David S. Miller

net/hsr: Remove unused but set variable

2016-10-18T14:28:18+00:00

Remove the unused but set variable master_dev in check_local_dest to fix
the following GCC warning when building with 'W=1':

  net/hsr/hsr_forward.c: In function ‘check_local_dest’:
  net/hsr/hsr_forward.c:303:21: warning: variable ‘master_dev’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Tobias Klauser 
Signed-off-by: David S. Miller

net/hsr: Use setup_timer and mod_timer.

2016-05-16T18:00:43+00:00

The function setup_timer combines the initialization of a timer with the
initialization of the timer's function and data fields. The mulitiline
code for timer initialization is now replaced with function setup_timer.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer() and mod_timer() to setup and arm a timer, making the
code compact and aid readablity.

Signed-off-by: Muhammad Falak R Wani 
Signed-off-by: David S. Miller

NLA_BINARY misuse bug in HSR

2016-04-21T17:59:08+00:00

Removed .type field from NLA to do proper length checking.
Reported by Daniel Borkmann and Julia Lawall.

Signed-off-by: Peter Heise 
Signed-off-by: David S. Miller